International Journal of Concrete Structures and Materials

  • 제9권4호
  • /
  • Pages.391-399
  • /
  • 2015
  • /
  • 1976-0485(pISSN)
  • /
  • 2234-1315(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

Modeling of Mechanical Properties of Concrete Mixed with Expansive Additive

  • Choi, Hyeonggil (Graduate School of Engineering, Muroran Institute of Technology) ;
  • Noguchi, Takafumi (Graduate School of Engineering, The University of Tokyo, Tokyo)
  • 투고 : 2014.12.08
  • 심사 : 2015.08.23
  • 발행 : 2015.12.31
⟨ 이전 논문 다음 논문 ⟩

초록

This study modeled the compressive strength and elastic modulus of hardened cement that had been treated with an expansive additive to reduce shrinkage, in order to determine the mechanical properties of the material. In hardened cement paste with an expansive additive, hydrates are generated as a result of the hydration between the cement and expansive additive. These hydrates then fill up the pores in the hardened cement. Consequently, a dense, compact structure is formed through the contact between the particles of the expansive additive and the cement, which leads to the manifestation of the strength and elastic modulus. Hence, in this study, the compressive strength and elastic modulus were modeled based on the concept of the mutual contact area of the particles, taking into consideration the extent of the cohesion between particles and the structure formation by the particles. The compressive strength of the material was modeled by considering the relationship between the porosity and the distributional probability of the weakest points, i.e., points that could lead to fracture, in the continuum. The approach used for modeling the elastic modulus considered the pore structure between the particles, which are responsible for transmitting the tensile force, along with the state of compaction of the hydration products, as described by the coefficient of the effective radius. The results of an experimental verification of the model showed that the values predicted by the model correlated closely with the experimental values.

키워드

참고문헌

  1. Al-Rawi, R. S. (1976). Choice of curing temperature for accelerated cured concrete. Cement and Concrete Research, 16(5), 603-611.
  2. Choi, H. G., Tsujino, M., Kitagaki, R. & Noguchi, T. (2012a). Expansion-contraction behaviors and cracking control effects of expansion concrete in buildings. In Proceedings of the 5th ACF international conference, Pattaya, Thailand. [ACF2012-0096 (Session 3-2)].
  3. Choi, H. G., Tsujino, M., Noguchi, T., & Kitagaki, R. (2012b). Expansion/contraction behavior and cracking control effect of expansive concrete in building structure. Proceedings of the Japan Concrete Institute, 34(1), 424-429.
  4. Hori, A., Tamaki, T., & Hagiwara, H. (2000). Cracking behavior of expansive concrete in homoaxial tension. Proceedings of the Japan Concrete Institute, 22(2), 511-516.
  5. Hua, C., Ehrlacher, A., & Acker, P. (1997). Analyses and models of the autogenous shrinkage of hardening cement paste II modeling at scale of hydration grains. Cement and Concrete Research, 27(2), 245-258. https://doi.org/10.1016/S0008-8846(96)00202-5
  6. Katsura, O., Morimoto, J., & Nawa, T. (1996). A model of strength development considering hydration of cement. Proceedings of the Japan Concrete Institute, 39, 109-114.
  7. Lokhorst, S. J., & van Breugel, K. (1997). Simulation of the effect of geometrical changes of the microstructure on the deformational behavior of hardening concrete. Cement and Concrete Research, 27(10), 1465-1479. https://doi.org/10.1016/S0008-8846(97)00163-4
  8. Maruyama, I. (2003). Time dependent property of cement based materials on the basis of micro-mechanics. PhD Dissertation, The University of Tokyo, Tokyo, Japan.
  9. Morioka, M., Hagiwara, H., Sakai, E., & Daimon, M. (1999). Chemical shrinkage and autogenous volume change of cement paste with expansive additive. Proceedings of the Japan Concrete Institute, 21(2), 157-162.
  10. Park, S. G. (2004). A study on the reduction of autogenous shrinkage of high performance concrete using shrinkage reducing admixture and expansive additive at early age. PhD Dissertation, The University of Tokyo, Tokyo, Japan.
  11. Park, K. B., & Lee, H. S. (2005). Prediction of temperature profile in high strength concrete structures using a hydration model. Journal of the Architectural Institute of Korea Structure & Construction, 21(10), 111-118.
  12. Powers, T. C., & Brownyard, T. L. (1947). Studies of the physical properties of hardened Portland cement paste. Journal of American Concrete Institute (Proceedings), 43.
  13. Ryshkewitch, E. (1953). Composition and strength of porous sintered alumina and zirconia. Journal of the American Ceramic Society, 36, 65-68. https://doi.org/10.1111/j.1151-2916.1953.tb12837.x
  14. Schiller, K. K. (1958). Mechanical properties of non-metallic materials (pp. 35-50). London, UK: Butterworths.
  15. Taplin, J. H. (1959). A method for following the hydration reaction in Portland cement paste. Australian Journal of Applied Sciences, 10, 329-345.
  16. Tashiro, C. (1993). Water behavior in cement & concrete. Report of water subcommittee, research committee of cement & concrete.
  17. van Breugel, K. (1997). Simulation of hydration and formation of structure in hardening cement-based materials. PhD Dissertation, Delft University, Delft, Netherlands.
  18. Woods, H. (1933). Heat evoloved by cement in relation to strength. Engineering News-Record, 1933, 431-433.
  19. Yanimoto, K., Morioka, M., Sakai, E., & Daimon, M. (2003). Expansion mechanism of cement added with expansive additive. Concrete research and technology, Japan Concrete Institute, 14(3), 23-31.

피인용 문헌

  1. Calculation of Constrained Stress in Expansive Mortar with a Composite Creep Model vol.2016, pp.None, 2015, https://doi.org/10.1155/2016/2372835
  2. Influence of Tylose MH1000 Content on Gypsum Thermal Conductivity vol.30, pp.3, 2015, https://doi.org/10.1061/(asce)mt.1943-5533.0002177
  3. INFLUENCE OF SELECTED MICRO ADDITIVES CONTENT ON THERMAL PROPERTIES OF GYPSUM vol.12, pp.3, 2019, https://doi.org/10.21307/acee-2019-037
  4. Influence of Restrained Condition on Mechanical Properties, Frost Resistance, and Carbonation Resistance of Expansive Concrete vol.13, pp.9, 2015, https://doi.org/10.3390/ma13092136