DOI QR코드

DOI QR Code

Estimation of Friction Coefficient Using Smart Strand

  • Jeon, Se-Jin (Department of Civil Systems Engineering, Ajou University) ;
  • Park, Sung Yong (Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Kim, Sang-Hyun (Department of Civil Systems Engineering, Ajou University) ;
  • Kim, Sung Tae (Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Park, YoungHwan (Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology)
  • Received : 2015.06.19
  • Accepted : 2015.08.18
  • Published : 2015.09.30

Abstract

Friction in a post-tensioning system has a significant effect on the distribution of the prestressing force of tendons in prestressed concrete structures. However, attempts to derive friction coefficients using conventional electrical resistance strain gauges do not usually lead to reliable results, mainly due to the damage of sensors and lead wires during the insertion of strands into the sheath and during tensioning. In order to overcome these drawbacks of the existing measurement system, the Smart Strand was developed in this study to accurately measure the strain and prestressing force along the strand. In the Smart Strand, the core wire of a 7-wire strand is replaced with carbon fiber reinforced polymer in which the fiber Bragg grating sensors are embedded. As one of the applications of the Smart Strand, friction coefficients were evaluated using a full-scale test of a 20 m long beam. The test variables were the curvature, diameter, and filling ratio of the sheath. The analysis results showed the average wobble and curvature friction coefficients of 0.0038/m and 0.21/radian, respectively, which correspond to the middle of the range specified in ACI 318-08 in the U.S. and Structural Concrete Design Code in Korea. Also, the accuracy of the coefficients was improved by reducing the effective range specified in these codes by 27-34 %. This study shows the wide range of applicability of the developed Smart Strand system.

Keywords

Acknowledgement

Grant : Development of Smart Prestressing and Monitoring Technologies for Prestressed Concrete Bridges

Supported by : Korea Institute of Civil Engineering and Building Technology

References

  1. ACI Committee 318. (2008). Building code requirements for structural concrete (ACI 318-08). Farmington Hills, MI, US: American Concrete Institute (ACI).
  2. ACI Committee 318. (2014). Building code requirements for structural concrete (ACI 318-14). Farmington Hills, MI, US: American Concrete Institute (ACI).
  3. American Association of State Highway and Transportation Officials (AASHTO). (2002). Standard specifications for highway bridges (17th ed.). Washington, D.C., US: AASHTO.
  4. American Association of State Highway and Transportation Officials (AASHTO). (2014). AASHTO LRFD bridge design specifications (7th ed.). Washington, D.C., US: AASHTO.
  5. American Society for Testing and Materials (ASTM). (2012). Standard specification for steel strand, uncoated sevenwire for prestressed concrete (ASTM A416/A416M-12a). West Conshohocken, PA, US: ASTM.
  6. British Standards Institution (BSI). (1997). Structural use of concrete (BS 8110). London, UK: BSI.
  7. Canadian Standards Association (CSA). (2006). Canadian highway bridge design code, CAN/CSA-S6 (10th ed.). Mississauga, ON, Canada: CSA.
  8. Cho, K. H., Kim, S. T., Park, S. Y., & Park, Y. H. (2013). Computation of the strand resistance using the core wire strain measurement. Engineering, 5, 850-855. https://doi.org/10.4236/eng.2013.511103
  9. Cho, K. H., Park, S. Y., Cho, J. R., Kim, S. T., & Park, Y. H. (2015). Estimation of prestress force distribution in the multi-strand system of prestressed concrete structures. Sensors, 15, 14079-14092. https://doi.org/10.3390/s150614079
  10. Euro-International Committee for Concrete (CEB). (1993). CEB-FIP model code. Lausanne, Switzerland: Thomas Telford Services Ltd.
  11. European Committee for Standardization (CEN). (2002). Design of concrete structures (Eurocode 2). Brussels, Belgium: CEN.
  12. Gupta, P. R. (2005). Rational determination of friction losses in post-tensioned construction (pp. 129-144). SP-231, American Concrete Institute (ACI).
  13. Jang, I. Y., & Yun, Y. W. (2009). Study on stress transfer property for embedded FBG strain sensors in concrete monitoring. International Journal of Concrete Structures and Materials, 3(1), 33-37. https://doi.org/10.4334/IJCSM.2009.3.1.033
  14. Japan Road Association (JRA). (2012). Specifications for highway bridges-Part III. Concrete bridges. Tokyo, Japan: JRA.
  15. Japan Society of Civil Engineers (JSCE). (2007). Standard specifications for concrete structures-design. Tokyo, Japan: JSCE.
  16. Jeon, S. J., Park, J. C., Park, I. K., & Shim, B. (2009). Estimation of friction coefficients based on field data. Journal of the Korean Society of Civil Engineers, 29(5A), 487-494.
  17. Jeung, B. K., Han, K. B., & Park, S. K. (2000). An experimental study on the frictional loss of stress in the prestressing tendons. Journal of the Korean Society of Civil Engineers, 20(5-A), 797-804.
  18. Kim, S. H. (2015). An experimental study on measurement of friction coefficient using smart strand. Master's thesis, Ajou University, Suwon-si, Korea.
  19. Kim, J. M., Kim, H. W., Park, Y. H., Yang, I. H., & Kim, Y. S. (2012). FBG sensors encapsulated into 7-wire steel strand for tension monitoring of a prestressing tendon. Advances in Structural Engineering, 15(6), 907-917. https://doi.org/10.1260/1369-4332.15.6.907
  20. Kim, S. T., Park, Y. H., Park, S. Y., Cho, K. H., & Cho, J. R. (2015). A sensor-type PC strand with an embedded FBG sensor for monitoring prestress forces. Sensors, 15, 1060-1070. https://doi.org/10.3390/s150101060
  21. Kitani, T., & Shimizu, A. (2009). Friction coefficient measurement test on 13MN class tendon of PC strands for prestressed concrete containment vessel (PCCV). In: Proceedings of 20th international conference on structural mechanics in reactor technology (SMiRT 20), Paper 1825.
  22. Korea Concrete Institute (KCI). (2012). Structural concrete design code. Seoul, Korea: KCI.
  23. Korea Institute of Civil Engineering and Building Technology (KICT). (2013). Development of smart prestressing and monitoring technologies for prestressed concrete bridges, KICT 2013-167. Goyang-si, Korea: KICT.
  24. Korea Institute of Civil Engineering and Building Technology (KICT). (2014). Development of smart prestressing and monitoring technologies for prestressed concrete bridges, KICT 2014-171. Goyang-si, Korea: KICT.
  25. Korea Road and Transportation Association (KRTA). (2010). Design code for highway bridges. Seoul, Korea: KRTA.
  26. Korean Agency for Technology and Standards (KATS). (2011). Uncoated stress-relieved steel wires and strands for prestressed concrete (KS D 7002). Seoul, Korea: Korean Standards Association (KSA).
  27. Kreyszig, E. (2011). Advanced engineering mathematics (10th ed.). Hoboken, NJ, US: Wiley.
  28. Moon, J. K., & Lee, J. H. (1997). A study on the determination of prestressing force considering frictional loss in PS concrete structures. Journal of the Korean Society of Civil Engineers, 17(I-1), 89-99.
  29. Nellen, P. M., Frank, A., Broennimann, R., Meier, U., & Sennhauser, U. J. (1999). Fiber optical Bragg grating sensors embedded in CFRP wires. SPIE Proceedings, 3670, 440-449.
  30. Nilson, A. H. (1987). Design of prestressed concrete (2nd ed.). Hoboken, NJ, US: Wiley.
  31. Park, Y. H., & Gil, H. B. (2004). An error analysis of the friction assessment method for PS tensioning. In: Proceedings of Korean Society of Civil Engineers (KSCE) conference, pp. 106-111.
  32. Park, Y. H., & Kang, H. T. (2003). A criterion for application of friction assessment methods in PS tensioning management. In: Proceedings of Korean Society of Civil Engineers (KSCE) conference, pp. 594-599.
  33. Post-Tensioning Institute (PTI). (2006). Post-tensioning manual (6th ed.). Phoenix, AZ, US: PTI.
  34. Precast/Prestressed Concrete Institute (PCI). (2011). Bridge design manual (3rd ed.). Chicago, IL, US: PCI.
  35. State of California Department of Transportation (Caltrans) Engineering Services. (2005). Prestress manual. Sacramento, CA, US: Caltrans.
  36. The International Federation for Structural Concrete (fib). (2013). fib model code for concrete structures 2010. Lausanne, Switzerland: fib.
  37. Xuan, F. Z., Tang, H., & Tu, S. T. (2009). In situ monitoring on prestress losses in the reinforced structure with fiber-optic sensors. Measurement, 42, 107-111. https://doi.org/10.1016/j.measurement.2008.04.011
  38. Zhou, Z., He, J., Chen, G., & Ou, J. (2009). A smart steel strand for the evaluation of prestress loss distribution in posttensioned concrete structures. Journal of Intelligent Material Systems and Structures, 20, 1901-1912. https://doi.org/10.1177/1045389X09347021

Cited by

  1. Balanced Ratio of Concrete Beams Internally Prestressed with Unbonded CFRP Tendons vol.11, pp.1, 2017, https://doi.org/10.1007/s40069-016-0171-6
  2. Pore Structure of Calcium Sulfoaluminate Paste and Durability of Concrete in Freeze-Thaw Environment vol.11, pp.1, 2015, https://doi.org/10.1007/s40069-016-0174-3
  3. Modeling of Bond Stress–Slip Relationships of a Strand in Concrete during Steam Curing vol.11, pp.3, 2015, https://doi.org/10.1007/s40069-017-0210-y
  4. Test Error Sensitivity for Methods of Testing Prestressed Friction Loss vol.23, pp.2, 2015, https://doi.org/10.1061/(asce)be.1943-5592.0001191
  5. Friction Characteristics of Post-Tensioned Tendons of Full-Scale Structures Based on Site Tests vol.2020, pp.None, 2015, https://doi.org/10.1155/2020/5916738
  6. Long-Term Characteristics of Prestressing Force in Post-Tensioned Structures Measured Using Smart Strands vol.10, pp.12, 2020, https://doi.org/10.3390/app10124084