References
- Abou Elfath, A., & Ghobarah, A. (2000). Behaviour of reinforced concrete frames rehabilitated with concentric steel bracing. Canadian Journal of Civil Engineering, 27, 433-444. https://doi.org/10.1139/l99-092
- ACI Committee 318 (2002). Building code requirements for reinforced concrete (ACI 318-02). Detroit, MI: American Concrete Institute.
- Altun, F., & Birdal, F. (2012). Analytical investigation of a three-dimensional FRP-retrofitted reinforced concrete structure's behaviour under earthquake load effect in ANSYS program. Natural Hazards and Earth System Sciences., 12, 3701-3707. https://doi.org/10.5194/nhess-12-3701-2012
- Amiri, G., Gh, R., et al. (2008). Evaluation of performance behaviour of reinforced concrete frame rehabilitated with coaxial steel braces. The Journal of Structure and Steel, 4(4), 17-25.
- Amiri, A.,&Tabatabaei, R. (2008). Earthquake risk management strategy plan using nonparametric estimation of hazard rate. American Journal of Applied Sciences, 5(5), 581-585. https://doi.org/10.3844/ajassp.2008.581.585
- Anam, I & Shoma, Z. N. (2011). Nonlinear properties of reinforced concrete structures, Department of Civil and Environmental Engineering, The University of Asia Pacific, tech_ bulletin n & journal.
- ANSYS (2009&2015). ANSYS manual, ANSYS, INC, Canonsburg, PA 15317, USA.
- ATC. (1995a). Structural response modification factors. ATC-19 Report. Applied Technology Council. Redwood City, CA, 1995.
- ATC. (1995b). A critical review of current approaches to earthquake-resistant design. ATC-34 Report. Applied Technology Council. Redwood City, CA, 1995.
- Badoux, M., & Jirsa, J. (1990). Steel Bracing of RC Frame for seismic retrofitting. ASCE Journal of Structural Engineering, 116, 55-74. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(55)
- Bathe, K. J. (1996). Finite element procedures. Upper Saddle River, NJ: Prentice Hall.
- Bazant, Z. P., & Becq-Giraudon, E. (2002). Statistical prediction of fracture parameters of concrete and implications for choice of testing standard. Cement and Concrete Research, 32, 529-556. https://doi.org/10.1016/S0008-8846(01)00723-2
- Berberian, M., & Navai I. (1977). Naghan (chahar mahal bakhtiari-high zagros, Iran) earthquake of 6 April 1977: A preliminary field report and a seismotectonic discussion. Geological Survey Iran, 40, pp. 51-77.
- Bozorgnia, Y., & Bertero, V. (2004). Earthquake engineering: From engineering seismology to performance-based engineering. Boca Raton, FL: CRC Press.
- Bush, T. D., Wyllie, L. A., & Jirsa, J. O. (1991). Observations on two seismic strengthening schemes for concrete frames. Earthquake Spectra, 7(4), 511-527. https://doi.org/10.1193/1.1585640
- Constantinou, M. C., Soong, T. T., & Dargush, G. F. (1998). Passive energy dissipation systems for structural design and retrofit. Monograph no. 1. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
- Cotsovos, D. M. (2013). Cracking of RC beam/column joints: Implications for the analysis of frame-type structures. Engineering Structures, 52, 131-139. https://doi.org/10.1016/j.engstruct.2013.02.018
- El-Metwally, S., & Chen, W. F. (1988). Moment-rotation modelling of reinforced concrete beam-column connections. ACI Structural Journal, 85(4), 384-394.
- FEMA-356, & FEMA-270. (2000). Pre-standard and commentary for seismic rehabilitation of buildings. Washington, DC: Federal Emergency Federal Agency.
- Ghaffarzadeh, H., & Maheri, M. R. (2006). Cyclic tests on the internally braced RC frames. Journal of Seismology and Earthquake Engineering (JSEE), 8(2), 177-186.
- Ghobarah, A., & Abou Elfath, A. (2001). Rehabilitation of a reinforced concrete frame using eccentric steel bracing. Engineering Structures, 23, 745-755. https://doi.org/10.1016/S0141-0296(00)00100-0
- Gourabi, A., & Yamani, M. (2011). Active faulting and quaternary landforms deformation related to the nain fault. American Journal of Environmental Sciences, 7(5), 441-447. https://doi.org/10.3844/ajessp.2011.441.447
- Guan, Y., Cheng, X., & Zhang, Y. (2011). Study on the earthquake disaster reduction information management system and its application. International Journal of Intelligent Systems and Applications, 1, 51-57.
- Kawamata, S., & Ohnuma, M. (1981). Strengthening effect of eccentric steel braces to existing reinforced concrete frames, In 7WCEE Conference, Proceedings of 2nd Seminar on Repair and Retrofit of Structures. Ann Arbor, MI: NSF.
- Kent, D. C., & Park, R. (1971). Flexural members with confined concrete. Journal of the Structural Division ASCE, 97, 1969-1990.
- Maheri, M. R., & Akbari, R. (2003). Seismic Behaviour factor, R, for steel x-braced and knee-braced RC building. Engineering Structures, 25, 1505-1513. https://doi.org/10.1016/S0141-0296(03)00117-2
- Maheri, M. R., & Ghaffarzadeh, H. (2008). Connection overstrength in steel-braced RC frames. Engineering Structures, 30(7), 1938-1948. https://doi.org/10.1016/j.engstruct.2007.12.016
- Maheri, M. R., & Hadjipour, A. (2003). Experimental investigation and design of steel brace connection to RC frame. Engineering Structures, 25(13), 1707-1714. https://doi.org/10.1016/S0141-0296(03)00162-7
- Maheri, M. R., Kousari, R., & Razzazan, M. (2003). Pushover tests on steel X-braced and knee-braced RC frames. Engineering Structures, 25(13), 1697-1705. https://doi.org/10.1016/S0141-0296(03)00150-0
- Maheri, M. R., & Sahebi, A. (1995a). Experimental investigation of the use steel bracing in reinforced concrete frames. In Proceedings of 2nd International Conf. on Seismology and Earthquake Eng., Tehran, Islamic Republic of Iran, Vol. 1, pp.755-784.
- Maheri, M. R., & Sahebi, A. (1995b). Use of Steel bracing in reinforced concrete frames. Engineering Structures, 9, 545-552.
- Masri, M., & Goel, S. C. (1996). Seismic design and testing of an RC slab-column frame strengthening by steel bracing. Earthquake Spectra, 12(4), 645-666. https://doi.org/10.1193/1.1585904
- Mastrandrea, L., & Piluso, V. (2009a). Plastic design of eccentrically braced frames, I: Moment-shear interaction. Journal of Constructional Steel Research, 65(5), 1007-1014. https://doi.org/10.1016/j.jcsr.2008.10.002
- Mastrandrea, L., & Piluso, V. (2009b). Plastic design of eccentrically braced frames, II: Failure mode control. Journal of Constructional Steel Research, 65(5), 1015-1028. https://doi.org/10.1016/j.jcsr.2008.10.001
- Moghaddam, H. A., & Estekanchi, H. (1994). On the characteristics of an off-diagonal bracing system. Elsevier, Journal of Constructional Steel Research, 35, 361-376.
- Moghaddam, H. A., & Estekanchi, H. (1999). Seismic behaviour of off-diagonal bracing systems. Elsevier, Journal of Constructional Steel Research, 51, 177-196. https://doi.org/10.1016/S0143-974X(99)00007-3
- Mohyeddin, A., Helen, M., Goldsworthy, B., & Emad, F. Gad. (2013). FE modelling of RC frames with masonry infill panels under in-plane and out-of-plane loading. Engineering Structures, 51, 73-87. https://doi.org/10.1016/j.engstruct.2013.01.012
- PEER. (2005). Strong motion database http://peer.berkeley.edu Retrieved 4 Apr 2009.
- Providakis, C. P. (2008). Pushover analysis of base-isolated steel-concrete composite structures under near-fault excitations. Soil Dynamics and Earthquake Engineering, 28(4), 293-304. https://doi.org/10.1016/j.soildyn.2007.06.012
- Ramin, K. (2009). Seismic investigation and numerical analysis of RC frame retrofitted by off diagonal steel bracing system (ODBS) Master science of Shiraz university (Thesis in Farsi).
- Rastiveis, H., Samadzadegan, F., & Reinartz, P. (2013). A fuzzy decision making system for building damage map creation using high resolution satellite imagery. Natural Hazards and Earth System Sciences, 13, 455-472. https://doi.org/10.5194/nhess-13-455-2013
- Ravi Kumar, G., Kalyanaraman, V., & Kumar, S. (2007). Behaviour of frames with non-buckling bracing under earthquakes. Journal of Constructional Steel Research, Elsevier, 63, 254-262. https://doi.org/10.1016/j.jcsr.2006.04.012
- Razavian Amrei, S. A., Ghodrati Amiri, G., & Rezaei, D. (2011). Evaluation of horizontal seismic hazard of Naghan, Iran World Academy of Science, Engineering and Technology, Vol. 5.
- Roeder, C., Popov, E. (1977). Inelastic behaviour of eccentrically braced steel frames under cyclic loading, Univ. of Calif. Berkeley, CA.
- SAP2000 (ver11.0). (2010). Software and manual. Berkeley, CA: CSI: Computers and Structures Inc.
- Scott, B. D., Park, R., & Priestley, M. J. N. (1982). Stress-strain behaviour of concrete confined by overlapping hoops at low and high strain rates. ACI Journal, 79, 13-27.
- Steidl, J. H., & Lee, Y. (2000). The SCEC phase III strongmotion database. Bulletin of the Seismological Society of America, 90, S113-S135. https://doi.org/10.1785/0120000511
- Sugano, S., & Fujimura, M. (1980). Seismic strengthening of existing reinforced concrete building. In Proceeding of the 7th World Conference on Earthquake Eng., Turkey, Part 1, Vol. 4, pp. 449-459.
- Tasnimi, A., & Masoumi, A. (1999). Study of the behaviour of reinforced concrete frames strengthened with steel brace. In Third international conference on seismology and seismic engineering. Tehran, Iran.
- Taucer, F., Spacone, E., & Filippou, F. C. (1991). A fiber beamcolumn element for seismic response analysis of reinforced concrete structures. Berkeley, CA: Earthquake Engineering Research Center, University of California at Berkeley.
- Uang, C. M. (1991). Establishing R (or Rw) and Cd factors for building seismic provisions. Journal of structural Engineering, ASCE, 117, 19-28. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(19)
- Vatani Oskouei, A., & Rafi'ee, M. H. (2009). Damage modeling in reinforced concrete bending frames originated by quake and its restoration using X-bracing system. Esteghlal, 28(1), 49-73.
- Willam K.J., & Warnke E.P. (1974). Constitutive model for the triaxial behaviour of concrete. In Proceedings of the international association for bridge and structural engineering, Vol. 19, (pp. 1-30). Bergamo, Italy.
- Yaghmaei Sabegh, S. (2011). Stochastic finite fault modeling for the 16 september 1978 Tabas, Iran, earthquake. IJE Transaction A Basics, 24(1), 15-24.
- Youssefa, M. A., Ghaffarzadehb, H., & Nehdia, M. (2007). Seismic performance of RC frames with concentric internal steel bracing. Engineering Structures, 29, 1561-1568. https://doi.org/10.1016/j.engstruct.2006.08.027
Cited by
- The Hysteresis Performance and Restoring Force Model for Corroded Reinforced Concrete Frame Columns vol.2016, pp.None, 2015, https://doi.org/10.1155/2016/7615385
- Comparison of Different Numerical Models of RC Elements for Predicting the Seismic Performance of Structures vol.10, pp.4, 2015, https://doi.org/10.1007/s40069-016-0170-7
- Experimental and Measurement Methods for the Small-Scale Model Testing of Lateral and Torsional Stability vol.11, pp.2, 2015, https://doi.org/10.1007/s40069-017-0198-3
- Key parameters influencing performance and failure modes for interaction soil-pile-structure system under lateral loading vol.19, pp.3, 2015, https://doi.org/10.1007/s42107-018-0033-4
- The Seismic Investigation of Off-Diagonal Steel Braced RC Frames vol.26, pp.3, 2018, https://doi.org/10.2478/sjce-2018-0020
- Fiber element-based nonlinear analysis of concrete bridge piers with consideration of permanent displacement vol.69, pp.3, 2015, https://doi.org/10.12989/sem.2019.69.3.243
- Concrete-filled twin-layer steel-sheet CWs system: A systematic review of the literature vol.18, pp.6, 2015, https://doi.org/10.1590/1679-78256622
- Dynamic Performance Evaluation of Concrete Building Using Low-Yield Point Steel Shear Panels vol.2021, pp.None, 2015, https://doi.org/10.1155/2021/1129327