Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Behavior of Polymerization Shrinkage Stress of Methacrylate-based Composite and Silorane-based Composite during Dental Restoration

Methacrylate 기질 복합레진과 Silorane 기질 복합레진의 치아 수복 시 중합수축응력거동

  • Park, Jung-Hoon (Department of Mechanical Engineering, Graduate School, Hanyang University) ;
  • Choi, Nak-Sam (Department of Mechanical Engineering, Hanyang University)
  • Received : 2014.10.21
  • Accepted : 2015.02.09
  • Published : 2015.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Polymerization shrinkage stress analysis of dimethacrylate-based composite (Clearfil AP-X, Kuraray) and silorane-based composite (Filtek P90, 3M ESPE) used for dental composite restorations was performed using strain-gage measurement and FEM analysis. A theoretical equation based on Young's modulus and polymerization shrinkage of the composite resin was proposed to predict the polymerization shrinkage stress. Experimental results showed that the maximum shrinkage stress of Clearfil AP-X was about 2.8 times higher than Filtek P90. FEM analysis agreed with such experimental stress behaviours and showed that the maximum Von-Mises stress appeared near the margin of the filled resin adhered with PMMA ring. The stress concentration at the interface on the specimen surface was higher than that in the interior. The maximum error of shrinkage stress by the theoretical equation was reasonable within 5% in comparison to FEM results under plane stress.

치아의 수복에 사용되는 재료인 Methacrylate 기질 복합레진(Clearfil AP-X)과 Silorane 기질 복합레진(Filtek P90)을 대상으로 스트레인게이지법과 FEM 분석법으로 중합수축응력거동을 분석하였다. 또한 복합레진의 탄성계수와 수축변형률을 중합수축응력과 관계시켜 이론식을 제시하고 이 식의 계산결과와 FEM 분석법의 결과를 비교하였다. 스트레인 게이지법으로 측정한 결과, 중합수축응력의 최대값은 Clearfil AP-X가 Filtek P90 보다 약 2.8배 높게 나타났다. FEM 분석 결과, Von-Mises 응력은 복합레진 수복재와 PMMA 링사이의 계면부에서 최대로 되었으며 시편표면의 계면부가 내부보다 응력집중이 더 컸음을 알았다. 예측식을 통한 반경 방향의 수축응력은 평면응력상태의 FEM 분석법을 통한 값과 비교하여 오차 5% 이내로 정확했음을 확인하였다.

Keywords

References

  1. Bausch, J.R., Lange de, K., and Davidson, C.L., "Clinical Significance of Polymerization Shrinkage of Composite Resins," The Journal of Prosthetic Dentistry, Vol. 48, No. 1, 1982, pp. 59-67. https://doi.org/10.1016/0022-3913(82)90048-8
  2. Kleverlaan, C.J., and Feilzer, A.J., "Polymerization Shrinkage and Contraction Stress of Dental Resin Composites," Dental Materials, Vol. 21, No. 12, 2005, pp. 1150-1157. https://doi.org/10.1016/j.dental.2005.02.004
  3. Ilie, N., Kunzelmann, K.H., and Hickel, R., "Evaluation of Micro-tensile Bond Strengths of Composite Materials in Comparison to their Polymerization Shrinkage," Dental Materials, Vol. 22, No. 7, 2006, pp. 593-601. https://doi.org/10.1016/j.dental.2005.05.014
  4. Sano, H., Shono, T., Sonoda, H., Takatsu, T., Ciucchi, B, Carvalho, R., and Pashley, D.H., "Relationship between Surface Area for Adhesion and Tensile Bond Strength-evaluation of a Microtensile Bond Test," Dental Materials, Vol. 10, No. 4, 1994, pp. 236-240. https://doi.org/10.1016/0109-5641(94)90067-1
  5. Takemori, T., Chigira, H., Itoh, K., and Hisamitsu, H., "Factors Affecting Tensile Bond Strength of Composite to Dentin," Dental Materials, Vol. 9, No. 2, 1993, pp. 136-138. https://doi.org/10.1016/0109-5641(93)90090-D
  6. Lee, I.B., Park, S.H, Kweon, H.J., Gu, J.W., and Choi, N.S., "Polymerization Shrinkage and Stress of Silorane-based Dental Restorative Composite," Composites Research, Vol. 26, No. 3, 2013, pp. 182-188. https://doi.org/10.7234/composres.2013.26.3.182
  7. Iga, M., Takeshige, F., Ui, T., Torii, M., and Tsuchitani, Y., "The Relationship between Polymerization Shrinkage Measured by a Modified Dilatometer and the Inorganic Filler Content of Light-cured Composites," Dental Materials, Vol. 10, No. 1, 1991, pp. 38-45. https://doi.org/10.4012/dmj.10.38
  8. Feilzer, A.J., de Gee, A.J., and Davidson, C.L. "Increased Wall to Wall Curing Contraction in Thin Bonded Resin Layers" Journal of Dental Research, 1989, Vol. 68, No.1, pp. 48-50. https://doi.org/10.1177/00220345890680010701
  9. Park, S.H., Krejci, I., and Lutz, F., "A Comparison of Micro Hardness of Resin Composites Polymerized by Plasma Arc or Conventional Visible Light Curing", Operative Dentistry, 2002, Vol. 27, pp. 30-37.
  10. Chung, Y.C., Min, K.S., Lee, H.H., Cho, K.M., and Cho, Y.B., "A Study of Contraction Shrinkage of Composite Resins and Ormocers with Various Curing Thimes," Journal of Korean Academy of Conservative Dentistry, 2003, Vol. 28, No. 4, pp. 326-333. https://doi.org/10.5395/JKACD.2003.28.4.326
  11. Song, S.E., Lim, S.H., Yoon, Y.J., and Kim, K.W., "A Photoelastic Evaluation of Stress Distribution During Distal Movement of Upper Molar," Korean Journal of Orthodontics, 2004, Vol. 34, No. 2, pp. 121-129.
  12. Obici, A.C., Sinhoreti, M.A.C., De Goes, M.F., Consai, S., and Sobrinho, L.C., "Effect of the Photo-activation Method on Polymerization Shrinkage of Restorative Composites," Operative Dentistry, Vol. 27, 2002, pp. 192-198.
  13. Lai, J.H., and Johnson, A.E., 1993, "Measuring Polymerization Shrinkage of Photo-activated Restorative Materials by a Water-filled Dilatometer," Dental Materials, Vol. 9, No. 2, pp. 139-143. https://doi.org/10.1016/0109-5641(93)90091-4
  14. Asmussen, E. and Munksgaard, E. C. 1988, "Bonding of Restorative Resins to Dentine: Status of Dentine Adhesives and Impact on Cavity Design and Filling Techniques," International Dental Journal, Vol. 38, No. 2, pp. 97-104.
  15. Lee, S.H., Chang, J., Ferracane, J., and Lee, I.B., "Influence of Instrument Compliance and Specimen Thickness on the Polymerization Shrinkage Stress Measurement of Light-cured Composites," Dental Materials, 2007, Vol. 23, No. 9, pp. 1093-1100. https://doi.org/10.1016/j.dental.2006.10.003
  16. Min, S.H., Ferracane, J., and Lee, I.B., "EEffect of Shrinkage Strain, Modulus, and Instrument Compliance on Polymerization Shrinkage Stress of Light-cured Composites during the Initial Curing Stage," Dental Materials, 2010, Vol. 26, No. 10, pp. 1024-1033. https://doi.org/10.1016/j.dental.2010.07.002
  17. Sakaguchi, R.L., Peters, M.C.R.B., Nelson, S.R., Douglas, W.H., and Poort, H.W., "Effects of Polymerization Contraction in Composite Restorations," Journal of Dentistry, Vol. 20, No. 3, 1992, pp. 178-182. https://doi.org/10.1016/0300-5712(92)90133-W
  18. Chung, J.H., and Lim, J.K., "Formulation of an Interface Element and Stiffness Evaluation of an Leaf Spring" Transactions of the Korean Society of Automotive Engineers, Vol. 5, No. 6, pp. 141-147.
  19. Dauvillier, B.S., Feilzer, A.J., De Gee, A.J., and Davidson, C.L., "Visco-elastic Parameters of Dental Restorative Materials during Setting", Journal of Dental Research, Vol. 79, No. 3, 2000, pp. 818-823. https://doi.org/10.1177/00220345000790030601
  20. Ryu, S.J., Cheon, J.H., and Min, J.B., "Evaluation of Polymerization Shrinkage Stress in Silorane-based Composites," Korean Academy of Conservative Dentistry, Vol. 36, No. 3, 2011, pp. 188-195. https://doi.org/10.5395/JKACD.2011.36.3.188
  21. Addison, O., Marquis, P.M., and Fleming, G.J.P., "Resin Elasticity and the Strengthening of All-ceramic Restorations," Journal of Dental Research, Vol. 86, No. 6, pp. 519-523. https://doi.org/10.1177/154405910708600606
  22. Kikuti, W.Y., Chaves, F.O., Hipolito, V.F., Rodrigues, F.P., and D'Alpino, P.H.P., "Fracture Resistance of Teeth Restored with Different Resin-based Restorative Systems," Brazilian Oral Research, Vol. 26, No. 3, pp. 275-281.

Cited by

  1. 디지털 이미지 상관법을 이용한 치과용 복합레진의 수복 시 중합수축분포 관찰 vol.30, pp.6, 2015, https://doi.org/10.7234/composres.2017.30.6.393