References
- Kim, C. H., Kim, D. S., Sung, Y. J., Hong, H. E. and Kim, S. B., Evaluation of Defiberation by Organosolv Ethanolamine Pulping for Integral Utilization of Oil Palm, Journal of Korea TAPPI 45(1) : 67-48(2013).
- Kim, D. S., Sung, Y. J., Kim, C, J. and Kim, S. B., Effects of pre-treatments on the Oil palm EFB fibers, Journal of Korea TAPPI 44(6) : 36-42(2012).
- FAO Stat, 2015.
- Lee, H. W., Basis study on oversea biomass energy resources 1 - palm biomass, J. Korean wood Sci. Technol. 42(4) : 439-449(2014). https://doi.org/10.5658/WOOD.2014.42.4.439
- Sung Y. J., Kim, C. H., Cho, H. S., Sim, S. W. and Lee, G. S., Study of oil plam biomass resources(part 1) - characteristics of thermal decomposition of oil palm biomass -, Journal of Korea TAPPI 45(1) : 13-20 (2013).
- Sung, Y. J., Kim, C. H., Cho, H. S., Kim, S. H., Sim, S. W., Yim, S. J., Lee, J. Y. and Kim, S. B., Study of oil palm biomass resources(Part 2) - Manufacturing characteristics of pellets using oil palm biomass -, Journal of Korea TAPPI 45(1) : 42-51(2013).
- Ahn, B. J., Han, G. S., Choi, D. H., Cho, S. T. and Lee, S. M., Assessment of the biomass potential recovered from oil palm plantation and crude palm oil production in indonesia, J. Korean Wood Sci. Technol. 42(3) : 231-243(2014). https://doi.org/10.5658/WOOD.2014.42.3.231
- Kim, D. S., Sung, Y. J., Kim, C. H. and Kim, S. B., Evaluation of the applicability of oil palm EFB fines as a functional organic filler, Journal of Korea TAPPI 46(1) : 56-64(2014).
- Park, I. S., Kim, J. N., Kim, D. Y. and Lee, Y. S., Effects of mixing ratio of ONP and OCC on physical properties of pulp molds for cushion packaging materials, Joural of Korea TAPPI 40(1) : 47-54(2008).
- Korea Customs Service.
- Sung, Y. J., Ruy, J. Y., Kim, J. H., Kim, K. T. and Song, B. K., Improvement of Drainage at wet pulp mold process, Journal of Korea TAPPI 36(3) : 52-59(2003).
- Sung, Y. J., Ruy, J. Y., Kim, J. H., Kim, K. T. and Song, B. K., Optimization of wet pulp mold prcess and reduction of drying energy, Journal of Korea TAPPI 36(3) : 52-59(2004).
- Kang, J. H. and Lim, H. A., Development of Higher functional Coating Agents for Pulp Mold (I) - Investigation of functions synthetic and natural coating agents -, Journal of Korea TAPPI 34(4) : 37-43 (2002).
- Kang, J. H. and Lim, H. A., Development of Higher functional Coating Agents for Pulp Mold (II) - Investigation of functions synthetic and natural coating agents -Journal of Korea TAPPI 35(1) : 19-26(2003).
- Kang, J. H. and Lim, H. A., Development of Higher Functional Coating Agents for Pulp Mold (III) - Manufacture of starch derivatives for coating -, Journal of Korea TAPPI 36(4) : 49-59(2004).
- Kim, T. Y., Joung, Y. J., Kim, D. C. and Sung, Y. J., Effects of relative humidity on the physical properties of PVA impregnated paper, Journal of Korea TAPPI 42(3) : 37-42(2010).
- Abdul Khalil, H. P. S., Ismail, H., Ahmad, M. N., Ariffin, A. and Hassan, K., The effect of various anhydride modifications on mechanical properties and water absorption of oil palm empty fruit bunches reinforced polyester composites, Polymer International 50:395-402(2001).
- Kang, J. H., Lim, H. A. and Park, S. H., Development of High Functional Coating Agents for Pulp Mold (IV) - Manufacture of higher functional and biodegradable coating agents -, Journal of Korea TAPPI 38(1) : 45-53(2006).
- Lee, M. W., Park, D. H. and Seo, Y. B., Effect of alkyl ketene dimer(AKD) on red algae reinforced biocomposites, Journal of Korea TAPPI Vol. 43(2) : 66-71(2011).
- Shin, Y. D., Seo W. S. and Cho, N. S., Behavior of AKD in AKD-sized paper by heating treatment during ageing, Journal of Korea TAPPI 39(1) : 16-24 (2007).
- Kim E. J., Park, J. H. and Park, I. K., The Study of Water Resistance and Water/Oxygen Barrier Properties of Poly(vinyl alcohol)/Water-soluble Poly (ethylene-co-acrylic acid) Blend Films, Appl. Chem. Eng. (23)2 : 217-221(2012).