References
- S. Sadamori, W. Siswomihardjo, K. Kameda, A. Saito, and T. Hamada, "Dimensional changes of relined denture bases with heat-cured, micro-wavectivated, autopolymerizing, and visible light-cured resins," Aust Dent J, Vol.40, pp.322-326, 1995. https://doi.org/10.1111/j.1834-7819.1995.tb04821.x
- A. Tallgren, "The continuing reduction of the residual alveolar ridges in complete denture wearers," J Prosthet Dent, Vol.89, pp.427-435, 2003. https://doi.org/10.1016/S0022-3913(03)00158-6
- W. M. Murphy, R. Huggett, R. W. Handley, and S. C. Brooks, "Rigid cold curing resins for direct use in the oral cavity," Br Dent J, Vol.160, pp.391-394, 1986. https://doi.org/10.1038/sj.bdj.4805870
- Arima T. Nikawa H, Hamada, and T, Harsini, "Composition and effect of denture base resin surface primers for reline acrylic resins," J Prosthet Dent, Vol.75, pp.457-462, 1996. https://doi.org/10.1016/S0022-3913(96)90044-X
- C. E. Vergani, R. S. Seo, A. C. Pavarina, and J. M. dos Santos Nunes Reis, "Flexural strength of autopolymerizing denture reline resins with microwavepostpolymerization treatment," J Prosthet Dent, Vol.93, pp.577-583, 2005. https://doi.org/10.1016/j.prosdent.2005.03.014
- T. Ohkubo, M. Oizumi, and T. Kobayashi, "Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin," Dent Mater J, Vol.28, pp.426-432, 2009. https://doi.org/10.4012/dmj.28.426
- R. E. Ogle, S. E. Sorensen, and E. A. Lewis, "A new visible light cured resin system applied to removable prosthodontics," J Prosthet Dent, Vol.56, pp.497-506, 1986. https://doi.org/10.1016/0022-3913(86)90397-5
- C. A. Arena, D. B. Evans, and T. J. Hilton, "A comparison of bond strengths among chairside hard reline materials," J Prosthet Dent, Vol.70, pp.126-131, 1993. https://doi.org/10.1016/0022-3913(93)90006-A
- J. Haywood, R. M. Basker, C. J. Watson, and D. J. Wood, "A comparison of three hard chairside denture reline materials," Eur J Prosthodont Restor Dent, Vol.11, pp.157-163, 2003.
- M. S. Beyli and J. A. von Fraunhofer, "Repair of fractured acrylic resin," J Prosthet Dent, Vol.44, No.4, pp.97-503, 1980.
- M. Berge, "Bending strength of intact and repair ed denture base resins," Acta Odontol Scand, Vol.41, pp.187-191, 1983. https://doi.org/10.3109/00016358309162322
- J. Bunch, G. H. Johnson, and J. S. Brudvik, "Evaluation of hard direct reline resins," J Prosthet Dent, Vol.57, pp.512-519, 1987. https://doi.org/10.1016/0022-3913(87)90027-8
- G. S. Kim, "The effect of denture cleansers on the bond strength and the surface hardness of reline resin to denture base resin," J Korean society Dent Prosthet, Vol.41, No.4, pp.493-502, 2003.
- Arima T. Nikawa H, Hamada, and T, Harsini, "Composition and effect of denture base resin surface primers for reline acrylic resins," J Prosthet Dent, Vol.75, pp.457-462, 1996. https://doi.org/10.1016/S0022-3913(96)90044-X
- P. K. Vallittu, V. P. Lassila, and R. Lappalainen, "Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin," J Prosthet Dent, Vol.72, pp.639-643, 1994. https://doi.org/10.1016/0022-3913(94)90297-6
- C. R. Leles, A. L. Machado, C. E. Vergani, E. T. Giampaolo, and A. C. Pavarina, "Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment," J Oral Rehabil, Vol.28, pp.1153-1157, 2001. https://doi.org/10.1046/j.1365-2842.2001.00786.x
- H. Matsumura, N. Tanoue, K. Kawasaki, and M. Atsuta, "Clinical evaluation of a chemically cured hard denture relining material," J Oral Rehabil, Vol.28, pp.640-644, 2001. https://doi.org/10.1046/j.1365-2842.2001.00701.x
- Y. Takahashi and J. Chai, "Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin," Int J Prosthodont, Vol.14, pp.531-535, 2001.
- H. Shimizu, T. Ikuyama, E. Hayakawa, F. Tsue, and Y. Takahashi, "Effects of surface preparation using ethyl acetate on the repair strength of denture base resin," Acta Odontol Scand, Vol.64, pp.159-163, 2006. https://doi.org/10.1080/00016350500514808
- B. Canan, "Flexural properties of repaired heat-polymerising acrylic resin after wetting with monomer and acetone," Gerodontol, Vol.27, pp.217-223, 2010. https://doi.org/10.1111/j.1741-2358.2009.00321.x
- H. Kato, H. Matsumura, T. Ide, and M. Atsuta, "Improved bonding of adhesive resin to sintered porcelain with the combination of acid etching and a two-liquid silane conditione," J Oral Rehabil, Vol.28, pp102-108, 2001. https://doi.org/10.1046/j.1365-2842.2001.00627.x
- T. Ohkubo, M. Oizumi, and T. Kobayashi, "Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin," Dent Mater J, Vol.28, pp.426-432, 2009. https://doi.org/10.4012/dmj.28.426
- M. Sadakane, T. Tada, S. Ide, M. Nakayama, N. Nishiya, S. Utsumi, Y. Torii, and K. Inoue, "Effect of additional heat cure on mechanical properties of light-cured composite resins; Part 1 Effect of silane treatment of filler," Jpn J Conserv Dent, Vol.35, pp.677-684, 1992.
- G. S. Solnit, "The effect of methacrylate reinforcement with silane treated and untreated glass fibers," J Prosthet Dent, Vol.66, pp.310-314, 1991. https://doi.org/10.1016/0022-3913(91)90255-U
- P. K. Vallittu, "Comparison of two different silane compound used for improving adhesion between fibers and acrylic denture base material," J Oral Rehabil, Vol.20, pp.533-539, 1993. https://doi.org/10.1111/j.1365-2842.1993.tb01640.x
- R. Newburg and C. H. Pameijer, "Composite resins bonded to porcelain with silane solution," J Am Dent Assoc, Vol.96, pp.288-291, 1978. https://doi.org/10.14219/jada.archive.1978.0071
- H. Kolodney, A. Puckett, B. Kistenmacher, and D. Weems, "Composite to silane-coated alloy bond strength following gypsum invested heat-processing," J Dent Res, Vol.71, p.278, 1992.
- K. B. May, M. C. Van Putten, D. A. Bow, and B. R. Lang, "4-META polymethylmethacrylate shear bond strength to titanium," Oper Dent, Vol.22, pp.37-40, 1997.
- J. O. Semmelman and P. R. Kulp, "Silane bonding porcelain teeth to actylic," J Am Dent Assoc, Vol.76, p.69, 1968. https://doi.org/10.14219/jada.archive.1968.0017
- M. W. Daniel and L. F. Francis, "Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxy silane-modifiedcollo idal silica coatings," J Colloid Interface Sci, Vol.205, pp.191-200, 1998. https://doi.org/10.1006/jcis.1998.5671
- S. K. Brown, "Mechanics of fracture in filled thermosetting resins," Br Polymer J, Vol.12, pp.24-30, 1980.
- N. M. Mohsen and R. G. Craig, "Effect of silanation of fillers on their dispersability by monomer systems," J Oral Rehabil, Vol.22, pp.183-189, 1995. https://doi.org/10.1111/j.1365-2842.1995.tb01562.x
- J. S. Calais and K. J. M. Soderholm, "Influence of filler type and water, exposure on flexural strength of experimental composite resin," J Dent Res, Vol.67, pp.836-840, 1998.
- R. McMoride and G. E. King, "Evaluation of primers used for bonding silicone to denture base materials," J Prosthet Dent, Vol.61, pp.636-639, 1989. https://doi.org/10.1016/0022-3913(89)90292-8
- K. J. M. Soderholm, "Degradation of glass filler in experimental composites," J Dent Res, Vol.60, pp.1867-1875, 1981. https://doi.org/10.1177/00220345810600110701
- International Organization for standardization, ISO 29022. Dentistry-Dentistry-Adhesion-Notched edge shear bond strength test, Geneva: Switzerland, ISO, 2013.