References
- Herbich J B. Modifications in Design Improve Dredge Pump Efficiency[R]. LEHIGH UNIV BETHLEHEM PA FRITZ ENGINEERING LAB, 1962.
- Cooper P, Sloteman D P. Impeller for centrifugal pumps: U.S. Patent 5,192,193[P]. 1993-3-9.
- Hackworth M, Eslinger D, Harrell N R. Impeller for centrifugal pump: U.S. Patent 7,549,837[P]. 2009-6-23.
- Franc, Jean-Pierre, and Jean-Marie Michel, eds. Fundamentals of cavitation. Vol. 76. Springer, 2006.202-204.
- Katz J. Cavitation phenomena within regions of flow separation[J]. Journal of Fluid Mechanics, 1984, 140(4): 397-436. https://doi.org/10.1017/S0022112084000665
- Franc J P, Michel J M. Attached cavitation and the boundary layer: experimental investigation and numerical treatment[J]. Journal of Fluid Mechanics, 1985, 154: 63-90. https://doi.org/10.1017/S0022112085001422
- Sears W R. Potential flow around a rotating cylindrical blade[J]. Journal of the Aeronautical Sciences (Institute of the Aeronautical Sciences), 2012, 17(3).
- Fogarty L E. Potential flow around a rotating, advancing cylindrical blade[J]. Journal of the Aeronautical Sciences (Institute of the Aeronautical Sciences), 2012, 17(9).
- Dumitrescu H, Cardos V. Analysis of leading-edge separation bubbles on rotating blades[J]. Journal of Aircraft, 2010, 47(5): 1815-1819. https://doi.org/10.2514/1.C000274
- Trigg M A, Tubby G R, Sheard A G. Automatic genetic optimization approach two-dimensional blade profile design for steam turbines[J]. Journal of turbomachinery, 1999, 121(1): 11-17. https://doi.org/10.1115/1.2841220
- Xu Y. The theory study of circular blade profile line[J]. Fluid Machinery, 1990, 08: 007.
- Xu Y. The drawing method of cylindrical blade with variable angle spiral[J]. Fluid Machinery, 1989, 7: 006.
- Jing Y. Design of Cylindrical Blade with Involute Contour[J]. Transactions of the Chinese Society of Agricultural Machinery, 2003, 34(5): 80-81.
- Coutier-Delgosha O, Hofmann M, Stoffel B, et al. Experimental and numerical studies in a centrifugal pump with twodimensional curved blades in cavitating condition[J]. Journal of Fluids Engineering, 2003, 125(6): 970-978. https://doi.org/10.1115/1.1596238
- Luo X, Zhang Y, Peng J, et al. Impeller inlet geometry effect on performance improvement for centrifugal pumps[J]. Journal of mechanical science and technology, 2008, 22(10): 1971-1976. https://doi.org/10.1007/s12206-008-0741-x
- Hirschi R, Favre J N, Parkinson E, et al. Centrifugal pump performance drop due to leading edge cavitation: numerical predictions compared with model tests[J]. Journal of fluids engineering, 1998, 120(4): 705-711. https://doi.org/10.1115/1.2820727
- Batchelor G K. An introduction to fluid dynamics[M]. Cambridge university press, 2000.
- Zwart P J, Gerber A G, Belamri T. A two-phase flow model for predicting cavitation dynamics[C]//Fifth International Conference on Multiphase Flow, Yokohama, Japan. 2004.
- Mejri I, Belamri T, Bakir F, et al. Comparison of computational results obtained from a homogeneous cavitation model with experimental investigations of three inducers[J]. Journal of fluids engineering, 2006, 128(6): 1308-1323. https://doi.org/10.1115/1.2353265
- Zhou X, Zhang Y, Ji Z, et al. The Optimal Hydraulic Design of Centrifugal Impeller Using Genetic Algorithm with BVF[J]. International Journal of Rotating Machinery, 2014.
Cited by
- Numerical Prediction and Performance Experiment in an Engine Cooling Water Pump with Different Blade Outlet Widths vol.2017, pp.1563-5147, 2017, https://doi.org/10.1155/2017/8945712
- Rotational Flow in Centrifugal Pump Meridian Using Curvilinear Coordinates vol.138, pp.8, 2016, https://doi.org/10.1115/1.4032756