Wind and Structures

  • 제20권1호
  • /
  • Pages.75-93
  • /
  • 2015
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Parametric numerical study of wind barrier shelter

  • Telenta, Marijo (Faculty of Mechanical Engineering, University of Ljubljana) ;
  • Batista, Milan (Faculty of Maritime studies and Transport, University of Ljubljana) ;
  • Biancolini, M.E. (Department of Enterprise Engineering, University of Rome "Tor Vergata") ;
  • Prebil, Ivan (Faculty of Mechanical Engineering, University of Ljubljana) ;
  • Duhovnik, Jozef (Faculty of Mechanical Engineering, University of Ljubljana)
  • 투고 : 2014.07.24
  • 심사 : 2014.11.29
  • 발행 : 2015.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

This work is focused on a parametric numerical study of the barrier's bar inclination shelter effect in crosswind scenario. The parametric study combines mesh morphing and design of experiments in automated manner. Radial Basis Functions (RBF) method is used for mesh morphing and Ansys Workbench is used as an automation platform. Wind barrier consists of five bars where each bar angle is parameterized. Design points are defined using the design of experiments (DOE) technique to accurately represent the entire design space. Three-dimensional RANS numerical simulation was utilized with commercial software Ansys Fluent 14.5. In addition to the numerical study, experimental measurement of the aerodynamic forces acting on a vehicle is performed in order to define the critical wind disturbance scenario. The wind barrier optimization method combines morphing, an advanced CFD solver, high performance computing, and process automaters. The goal is to present a parametric aerodynamic simulation methodology for the wind barrier shelter that integrates accuracy and an extended design space in an automated manner. In addition, goal driven optimization is conducted for the most influential parameters for the wind barrier shelter.

키워드

참고문헌

  1. Batista, M. (2011), Meritev obnasanja tovarnega vozila pri mocni burji na cestnem odseku hitre ceste Razdrto-Vipava-Ajdovscin, Portoroz, Slovenia.
  2. Biancolini, M.E. (2012), "Mesh morphing and smoothing by means of radial basis functions (RBF): a practical example using Fluent and RBF Morph", Handbook of Research on Computational Science and Engineering, 347-380.
  3. Biancolini, M., Biancolini, C., Costa, E.G.D. and Valentini, P. (2009), "Industrial application of the meshless morpher RBF morph to a motorbike windshield optimisation", Proceedings of The European Automotive Simulation Conference, Munich.
  4. Biancolini, M., Viola, I. and Riotte, M. (2014), "Sails trim optimisation using CFD and RBF mesh morphing", Comput Fluids, 93, 46-60. https://doi.org/10.1016/j.compfluid.2014.01.007
  5. Bourdin, P., and Wilson, J. D. (2008), "Windbreak aerodynamics: is computational fluid dynamics reliable? ", Bound. - Lay. Meteorol., 126(2), 181-208. https://doi.org/10.1007/s10546-007-9229-y
  6. Bradley, E. and Mulhearn, P. (1983), "Development of velocity and shear stress distributions in the wake of a porous shelter fence", J. Wind Eng. Ind. Aerod., 15(1-3), 145-156. https://doi.org/10.1016/0167-6105(83)90185-X
  7. Cella, U.B. and Biancolini, M. (2012), "Aeroelastic analysis of aircraft wind-tunnel model coupling structural and fluid dynamic codes", J. Aircraft, 49(2), 407-414. https://doi.org/10.2514/1.C031293
  8. de Boer, A., van der Schoot, M. and Bijl, H. (2007), "Mesh deformation based on radial basis function interpolation", Comput Struct., 85(11-14), 784-795. https://doi.org/10.1016/j.compstruc.2007.01.013
  9. Dong, Z., Luo, W., Qian, G. and Wang, H. (2007), "A wind tunnel simulation of the mean velocity fields behind upright porous fence", Agric. For. Meterol., 146(1-2), 82-93. https://doi.org/10.1016/j.agrformet.2007.05.009
  10. Estruch, O., Lehmkuhl, O., Borrell, R., Perez Segarra, C. and Oliva, A. (2012), "A parallel radial basis function interpolation method for unstructured dynamic meshes", Comput Fluids, 10, 44-54.
  11. Fang, F.M. and Wang, D.Y. (1997), "On the flow around a vertical porous fence", J. Wind Eng. Ind. Aerod., 67-68, 415-424. https://doi.org/10.1016/S0167-6105(97)00090-1
  12. Huang, L.M., Chan, H.C. and Lee, J.T. (2012), "A numerical study on flow around nonuniform porous fences", J. Appl. Math., 2012.
  13. Khondge, A. and Sovani, S. (2012), An accurate, extensive, and rapid method for aerodynamics optimization: The 50:50:50 Method, SAE Technical Paper.
  14. Lee, S.J. and Kim, H.B. (1999), "Laboratory measurements of velocity and turbulence field behind porous fences", J. Wind Eng. Ind. Aerod., 80(3), 311-326. https://doi.org/10.1016/S0167-6105(98)00193-7
  15. Masud, A., Bhanabhagvanwala, M. and Khurram, R.A. (2007), "An adaptive mesh rezoning scheme for moving boundary flows and fluid-structure interaction", Comput Fluids, 36(1), 77-91. https://doi.org/10.1016/j.compfluid.2005.07.013
  16. Menter, F.R. (1994), "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA J., 32(8), 1598-1605. https://doi.org/10.2514/3.12149
  17. Menter, F.R., Kuntz, M. and Langtry, R. (2003), Ten years of industrial experience with the SST turbulence model,Turbulence, Heat and Mass Transfer.
  18. Packwood, A. (2000), "Flow through porous fences in thick boundary layers: comparisons between laboratory and numerical experiments", J. Wind Eng. Ind. Aerod., 88(1), 75-90. https://doi.org/10.1016/S0167-6105(00)00025-8
  19. Rendall, T. and Allen, C. (2009), "Efficient mesh motion using radial basis functions with data reduction algorithms", J. Comput. Phys., 228(17), 6231-6249. https://doi.org/10.1016/j.jcp.2009.05.013
  20. Rendall, T. and Allen, C. (2010), "Reduced surface point selection options for efficient mesh deformation using radial basis functions", J. Comput. Phys., 229(8), 2810-2820. https://doi.org/10.1016/j.jcp.2009.12.006
  21. Roy, S. and Srinivasan. (2000), External flow analysis of a truck for drag reduction, SAE.
  22. Sederberg, T.W.P. and Parry, S.R. (1986), "Free-form deformation of solid geometric models", Proceedings of the 13th Annual Conference on Computer Graphics and Interactive Techniques (SIGGRAPH '86), 151-160. New York, (Eds., D.C. Evans and R.J. Athay). ACM.
  23. Telenta, M., Duhovnik, J., Kosel, F. and Sajn, V. (2013), "Wake interaction of a rectangular prism behind a geometrically accurate porous barrier", Technical Gazette, 20(5), 877-882.
  24. Telenta, M., Duhovnik, J., Kosel, F. and Sajn, V. (2014), "Numerical and experimental study of the flow through a geometrically accurate porous wind barrier model", J. Wind Eng. Ind. Aerod., 124, 99-108. https://doi.org/10.1016/j.jweia.2013.11.010
  25. Van Renterghem, T. and Botteldooren, D. (2002), "Reducing screen-induced refraction of noise barriers in wind by vegetative screens", Acta Acust. United Acust., 88(2), 231-238.
  26. Wakeland, R. and Keolian, R. (2003), "Measurements of resistance of individual square-mesh screens to oscillating flow at low and intermediate reynolds numbers", J. Fluid. Eng. - T ASME, 5(125), 851-862.

피인용 문헌

  1. A new meshless approach to map electromagnetic loads for FEM analysis on DEMO TF coil system vol.100, 2015, https://doi.org/10.1016/j.fusengdes.2015.06.031
  2. RBF-based mesh morphing approach to perform icing simulations in the aviation sector pp.0002-2667, 2019, https://doi.org/10.1108/AEAT-07-2018-0178
  3. Wind tunnel tests on flow fields of full-scale railway wind barriers vol.24, pp.2, 2015, https://doi.org/10.12989/was.2017.24.2.171
  4. Fast interactive CFD evaluation of hemodynamics assisted by RBF mesh morphing and reduced order models: the case of aTAA modelling vol.14, pp.4, 2020, https://doi.org/10.1007/s12008-020-00694-5
  5. Wind Tunnel Test on Local Wind Field around the Bridge Tower of a Truss Girder vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/8867668
  6. Research on wind barrier of canyon bridge-tunnel junction based on wind characteristics vol.24, pp.5, 2015, https://doi.org/10.1177/1369433220971730
  7. Influences of Wind Barriers on the Train Running Safety on a Highway-Railway One-Story Bridge vol.21, pp.14, 2015, https://doi.org/10.1142/s0219455421400095