DOI QR코드

DOI QR Code

피드백 구조를 갖는 광대역 캐스코드 증폭기의 설계

Design of Wideband Cascode Amplifiers Using a Feedback Structure

  • 이재훈 (순천향대학교 전기공학과) ;
  • 임종식 (순천향대학교 전기공학과)
  • Lee, Jaehoon (Department of Electrical Engineering, Soonchunhyang University) ;
  • Lim, Jongsik (Department of Electrical Engineering, Soonchunhyang University)
  • 투고 : 2014.07.14
  • 심사 : 2015.01.08
  • 발행 : 2015.01.31

초록

본 연구에서는 초고주파 대역 소신호 트랜지스터를 이용하여 광대역 특성을 갖는 캐스코드 증폭기의 설계에 대하여 기술한다. 캐스코드 구조를 사용함으로써, 중간대역 이득의 감소를 피하면서 밀러 효과를 감소시켜 차단주파수를 확장시켰다. 또한 입력 매칭을 용이하게 하고 광대역에서 리플이 작은 이득 특성을 얻기 위해 피드백 회로를 이용하였다. 종래에 광대역 증폭기로 평형 증폭기나 분산형 증폭기가 자주 사용되지만, 본 연구에서는 기존보다 회로의 크기를 감소시키면서 광대역 이득특성을 얻을 수 있도록 캐스코드 구조의 증폭기를 설계하였다. 실제 측정에서 1000-2000MHz사이에서 $8.5dB{\pm}1.5dB$의 이득을 보였다. 제작된 캐스코드 증폭기는, 비록 약간의 주파수 이동이 있으나, 예측 결과와 유사하게 1000MHz 이상의 대역폭에서 8dB 이상의 평탄한 이득을 가졌다.

This paper describes the design of a wideband cascode amplifier using a feedback network and microwave small-signal transistors. The adopted cascode structure enables the miller effect to be lessened, cutoff frequency to increase, and reduction of gain in the mid-band to be mitigated. In addition, a feedback network is added to the cascode structure to improve the input matching and ripple performances over the wide operating band. The designed cascode amplifier contains a feedback network for small size and broadband amplification, whereas balanced amplifiers and distributed amplifiers have been used widely. The measurement shows $8.5dB{\pm}1.5dB$ of gain over 1000-2000MHz. The fabricated cascode amplifier has more than 8dB of gain over a 1000MHz bandwidth with a good flatness. The measured performances agree with the predicted ones even a minor shift in operating frequency is observed.

키워드

참고문헌

  1. K. B. Niclas, W. T. Wilsesr, R. B. Gold, and W. R. Hitchens, "The Matched Feedback Amplifier: Ultrawide-Band Microwave Amplification with GaAs MESFET's," IEEE Trans. Microwave Theory and Techniques, vol. MTT-28, no. 4, pp. 285-294, Apr. 1980. DOI: http://dx.doi.org/10.1109/TMTT.1980.1130067
  2. J. Lim, C. Park, J. Koo, H. Cha, Y. Jeong, S.-M. Han, and D. Ahn, "A Balanced Power Amplifier Utilizing the Reflected Input Power," Proceedings of the 2009 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT), pp. 88-91, Dec. 2009. DOI: http://dx.doi.org/10.1109/RFIT.2009.5383733
  3. E. W. Strid and K. R. Gleason, "A DC-12 GHz Monolithic GaAsFET Distributed Amplifier," IEEE Trans. Microwave Theory and Techniques, vol. MTT-30, no. 7, pp. 969-975, Jul. 1982. DOI: http://dx.doi.org/10.1109/TMTT.1982.1131185
  4. E. Gilbert, "Impedance Matching with Lossy Components," IEEE Trans. Circuits and Systems, vol. CAS-22, no. 2, pp. 96-100, Feb. 1975. DOI: http://dx.doi.org/10.1109/TCS.1975.1084016
  5. B. Heydari, P. Reynaert, E. Adabi, M. Bohsali, B. Afshar, M. A. Arbabian and A. M. Niknejad, "A 60-GHz 90-nm CMOS Cascode Amplifier with Interstage Matching," Proceedings of the 2nd European Microwave Integrated Circuits Conference, pp. 88-91, Oct. 2007. Munich Germany. DOI: http://dx.doi.org/10.1109/EMICC.2007.4412654
  6. A. Tessmann, W. H. Haydl, A. Hulsmann, and M. Schlechtweg, "High-Gain Cascode MMIC's in Coplanar Technology at W-band Frequencies," IEEE Microwave and Guided Wave Letters, vol. 8, no. 12, pp. 430-431, Dec. 1998. DOI: http://dx.doi.org/10.1109/75.746765
  7. T. L. Floyd, Electronic Devices 7/e, Ch.10, Prentice-Hall, 2005.
  8. G. Gonzalez, Microwave Transistor Amplifiers Analysis and Design 2/e, Ch.2 and Ch.4, Prentice-Hall, 1997.