DOI QR코드

DOI QR Code

Experimental analysis and modeling of steel fiber reinforced SCC using central composite design

  • Kandasamy, S. (Department of Civil Engg. (Structural), Govt. College of Tech.) ;
  • Akila, P. (Department of Civil Engineering, University College of Engineering)
  • 투고 : 2013.08.10
  • 심사 : 2015.01.03
  • 발행 : 2015.02.25

초록

The emerging technology of self compacting concrete, fiber reinforcement together reduces vibration and substitute conventional reinforcement which help in improving the economic efficiency of the construction. The objective of this work is to find the regression model to determine the response surface of mix proportioning Steel Fiber Reinforced Self Compacting Concrete (SFSCC) using statistical investigation. A total of 30 mixtures were designed and analyzed based on Design of Experiment (DOE). The fresh properties of SCC and mechanical properties of concrete were studied using Response Surface Methodology (RSM). The results were analyzed by limited proportion of fly ash, fiber, volume combination ratio of two steel fibers with aspect ratio of 50/35: 60/30 and super plasticizer (SP) dosage. The center composite designs (CCD) have selected to produce the response in quadratic equation. The model responses included in the primary stage were flowing ability, filling ability, passing ability and segregation index whereas in harden stage of concrete, compressive strength, split tensile strength and flexural strength at 28 days were tested. In this paper, the regression model and the response surface plots have been discussed, and optimal results were found for all the responses.

키워드

참고문헌

  1. Almeida Filho, F.M., Barragan, B.E., Casas J.R. and El Debs, A.L.H.C.. (2010), "Hardened properties of self-Compacting concrete- A statistical approach", Constr. Build. Mater., 24(9), 1608-1615. https://doi.org/10.1016/j.conbuildmat.2010.02.032
  2. Ammar Yahia, Makoto Tanimura and Kamal H.Khayat (2005), "Experiment design to evaluate the effect of mixture parameters on rheological properties of self-consolidating concrete equivalent mortar", First International Symposium on Design, Performance and Use of a Self-Consolidating Concrete SCC. China, May.
  3. Arabi N.S. Al Qadi, Kamal Nasharuddin Bin Mustapha, Hashem Al-Mattarneh and Qahir N.S. AL-Kadi (2009), "Statistical models for hardened properties of self-compacting concrete", Am. J. Eng. Appl. Sci.,2(4), 764-770. https://doi.org/10.3844/ajeassp.2009.764.770
  4. Aslani, F. and Natoori, M. (2013), "Stress-strain relationships for steel fiber reinforced self- compacting concrete", Struct. Eng. Mech., 46(2), 295-322. https://doi.org/10.12989/sem.2013.46.2.295
  5. Balaguru, P. and Shah, S.P. (1992), "Fiber-reinforced cement composite", McGraw-Hill, New York, USA.
  6. Banthia, N. and Trottier, J.F. (1995),"Concrete reinforced with deformed steel fibres. Part II: Toughness characterization", ACI Mater. J, 92(2), 146-154.
  7. Barros, J.A.O. and Figueiras, J.A. (1999), "Flexural behaviour of SFRC: Testing and modeling", J. Mater. Civil Eng, 11(4), 331-339. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(331)
  8. Bayramov, F. and Tasdemir, C. and Tasdemir, M.A. (2004), "Optimisation of steel fibre reinforced concrete by means of statistical response surface method", Cement Concrete Compos., 26, 665-675. https://doi.org/10.1016/S0958-9465(03)00161-6
  9. BS 5075: Part 1: 1982 Specification for accelerating admixtures, retarding admixtures and water reducing admixtures, India.
  10. BS 5075: Part 3: 1985 Specification for superplasticizing admixtures, India.
  11. Derringer, G. and Suich, R. (1980), "Simultaneous optimization of several response variables", J. Quality Tech., 12(4), 214-219.
  12. EFNARC (2002), "Specification and guidelines for self-compacting concrete, English edition".
  13. European Federation for Specialist Construction Chemicals and Concrete Systems. Norfolk, UK.
  14. Ferrara, L., Park, Y.D. and Shah, S.P. (2007), "A method for mix-design of fiber-reinforcedself-compacting concrete", Cement Concret Res, 37, 957-971. https://doi.org/10.1016/j.cemconres.2007.03.014
  15. Ghezal, A. and Kamal H.K. (2002), "Optimizing self- consolidating concrete with limestone filler byusing statistical factorial design methods", ACI Mater. J., 99(3), 264-272.
  16. IS 12269 is the Indian standard code for 53 grade cement, India.
  17. IS 383-1970 is the Indian standard code for fine and coarse aggregate, India.
  18. IS 9103-1999 is Indian standard code for Specification foe concrete admixture, India.
  19. IS 456 is Indian standard code for plain and reinforced concrete, India.
  20. Kurihara, N., Kunieda, M., Kamada, T., Uchida,Y. and Rokugo, K. (2000), "Tension softeningdiagrams and evaluation of properties of steel fibre reinforced concrete", Eng. Fract. Mech., 65, 235-245. https://doi.org/10.1016/S0013-7944(99)00116-2
  21. Mobasher, B., Stang, H. and Shah, S.P. (1990), "Microcracking in fiber-reinforced concrete", Cement Concrete Res, 20, 665-676. https://doi.org/10.1016/0008-8846(90)90001-E
  22. Murali, T.M. and Kandasamy, S. (2009), "Mix proportioning of high performance of self- compacting concrete using response surface methodology", J. Civil Eng, 32(2), 91-98.
  23. Nawy, E.G. (2001), "Fundamentals of high-performance concrete", John Wiley & Sons, New York, USA.
  24. Ozbay, E., Oztas, A., Baykasoglu, A. and Ozbebek, H. (2009), "Investigating mix proportions of high strength self compacting concrete by using Taguchi method", Constr. Build. Mater., 23(2), 694-702. https://doi.org/10.1016/j.conbuildmat.2008.02.014
  25. Qian, C.X. and Stroeven, P. (2000), "Development of hybrid polypropylene-steel fibre reinforced concrete", Cement Concrete Res., 63-69.
  26. Sahmaran, M. and Chrisiano, H.A. (2006), "The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars", Cement Concrete Compos., 28(5), 432-440. https://doi.org/10.1016/j.cemconcomp.2005.12.003
  27. Sandra Nunes, Ana Mafalda Matos, Tiago Duarte, Helena Figueiras and Joana Sousa-Coutinho, (2013), "Mixture design of self- compacting glass mortar", Cement Concrete Compos., 43, 1-11.
  28. Shah, S.P. (1991), "Do fibers increase the tensile strength of cement-based matrixes?", ACI Mater J, 88(6), 595-602.
  29. SimSek, B., Tansel Ic, Y. and Simsek, E.H. (2013), "A TOPSIS-based taguchi optimization to determine optimal mixture proportions of the high strength self-compacting concrete", Chem. Intell. Lab. Sys., 125(15), 18-32. https://doi.org/10.1016/j.chemolab.2013.03.012
  30. Song, P.S., Wu, J.C., Hwang, S. and Sheu, B.C. (2005), "Statistical analysis of Impact strength and strength Reliability of steel-polypropylene hybrid fibre reinforced concrete", Constr. Build. Mater., 19, 1-9. https://doi.org/10.1016/j.conbuildmat.2004.05.002
  31. Su, W. and Chen, H. (2001)," The effect of hybrid fibres and expansive agent on the shrinkage and permeability of high-performance concrete", Cement Concrete Res., 31(4), 595-601. https://doi.org/10.1016/S0008-8846(00)00479-8
  32. Takada, K. and Tangtermsirikul, S. (2000), Testing of Fresh Concrete: State-of-the-Art Report of RILEM Technical Committee Report, 174-SCC, RILEM Report, vol. 23, S.A.R.L., RILEM, Bagneux, France.
  33. Wafa, F.F. and Ashour, S.A. (1992), "Mechanical properties of high-strength fibre reinforced concrete", ACI Mater J., 89(5), 449-455.
  34. Yao,W., Li, J. and Wu, K. (2003), "Mechanical properties of hybrid fibre-reinforced concrete at low fibre volume fraction", Cement Concrete Res, 33, 27-30. https://doi.org/10.1016/S0008-8846(02)00913-4

피인용 문헌

  1. Probabilistic modeling of geopolymer concrete using response surface methodology vol.19, pp.6, 2015, https://doi.org/10.12989/cac.2017.19.6.737
  2. Relations between rheological and mechanical properties of fiber reinforced mortar vol.20, pp.4, 2015, https://doi.org/10.12989/cac.2017.20.4.449
  3. Case-based reasoning approach to estimating the strength of sustainable concrete vol.20, pp.6, 2017, https://doi.org/10.12989/cac.2017.20.6.645
  4. Performance of concrete structures with a combination of normal SCC and fiber SCC vol.20, pp.6, 2015, https://doi.org/10.12989/cac.2017.20.6.655
  5. Study on the local damage of SFRC with different fraction under contact blast loading vol.22, pp.1, 2015, https://doi.org/10.12989/cac.2018.22.1.063
  6. Effect of hybrid fibers on flexural performance of reinforced SCC symmetric inclination beams vol.22, pp.2, 2015, https://doi.org/10.12989/cac.2018.22.2.209