DOI QR코드

DOI QR Code

굴삭기 엔진용 저압연료펌프 유체의 유동변화에 대한 수치해석적 연구

A Study for Numerical Analysis of Flow Variation on Low Pressure Fuel Pump Fluid using Excavator Engine

  • 투고 : 2015.09.16
  • 심사 : 2015.11.20
  • 발행 : 2015.12.31

초록

이 논문은 굴삭기 엔진용 저압연료 펌프의 연료 유동에 대한 유동장 및 속도, 압력에 관하여 수치해석 방법을 적용하여 연구한 것이다. 연료 펌프의 압력 분포는 로터의 회전각도에 따라 연속적으로 변하며, 특히 회전각도 $40^{\circ}$에서 상대적으로 매우 높은 토출부 압력과 낮은 흡입부 압력이 동시에 발생함을 확인하였다. 또한, 이 각도에서 누설유동 유속이 가장 증가함을 알 수 있었다. 그리고 연료 펌프의 로터 회전수의 증가에 따라 평균토출유량이 선형적으로 증가하였고, 간극크기가 감소함에 따라 토출유량이 로터 기어 사이의 배제용적으로부터 계산된 이론적 토출유량 0.0712kg/s 으로 접근하는 것을 확인할 수 있었다.

This paper is to study applying for numerical analysis method for flow field, velocity and pressure of fuel on the low pressure pump using excavator. The pressure distribution of fuel pump certified the linear variation according to rotation angle of rotor. Especially, it knew the fact that the pressure in rotation angle $40^{\circ}$ appeared high outlet and low inlet of fuel pump. Also, this range angle can seek the fact that the leakage flow and velocity are the most increasing. And the more rotor rotation of fuel pump, the more mean outlet flow rate increased in linear. Whenever the gap size decrease with rotor and housing, the discharge flow rate could seek the approaching 0.0712kg/s that consider with theory discharge flow rate calculated from displacement between rotor gear and idle gear.

키워드

참고문헌

  1. L.K. Lee, etc, "Experimental Study on Reducing the Adherence Phenomenon between Idle Gear and Housing for Low-Pressure Fuel Pump of Excavator engine", Journal of KSTLE Vol. 29, No. 2, (2013)
  2. Jung-Ho Lee, etc, "Numerical Simulation of 3-D Cavitation Flow in Volumetric Gear Pump", Spring Conference of KSME, (2011)
  3. S.H Kim, etc, "Characteristics of Two Dimension Flow in an Involute Gear Pump", Journal of KSFC, Vol. 8, No.2, (2011)
  4. Nam Kyung-Woo, etc, "Numerical Simulation In the IC Engine Lubricating Gerotor Oil PumP", Journal B of KSME, Vol. 2, No.6, (2006)
  5. Chan-Shik Won, etc, "Flow Analysis of Automotive Oil Pump of Gerotor type", Journal of Fluid Mechanical, Vol. 6, No. 4, (2003)
  6. Mincheol Park, etc, "Flow Analysis for 30ton Wheel Loader Gear Pump", Busan and Ulsan Spring Conference of KSAE, (2012)