한국도로학회논문집 (International Journal of Highway Engineering)

  • 제17권1호
  • /
  • Pages.7-16
  • /
  • 2015
  • /
  • 1738-7159(pISSN)
  • /
  • 2287-3678(eISSN)
한국도로학회 (Korean Society of Road Engineers)
권호 표지
DOI QR코드

DOI QR Code

재생골재를 함유한 콘크리트의 열팽창계수 측정

Measurement for Coefficient of Thermal Expansion of Concretes Made with Recycled Concrete Aggregates

  • 투고 : 2014.08.01
  • 심사 : 2015.01.20
  • 발행 : 2015.02.16
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSES : This study was performed to determine a systematic approach for measuring the coefficient of thermal expansion (COTE) of concrete specimens. This approach includes the initial calibration of measurement equipment. Test variables include coarse aggregate types such as natural aggregate, job-site produced recycled concrete aggregate, and recycled aggregate processed from an intermediate waste treatment company. METHODS : First, two cylindrical SUS-304 specimens with a known COTE value of $17.3{\times}10^{-6}m/m/^{\circ}C$. were used as reference specimens for the calibration of each measurement system. The well-known AASHTO TP-60 COTE apparatus for concrete measurement was utilized in this study. Four different measurement apparatuses were used with each LVDT installed and a calibration value was determined using each measurement apparatus. RESULTS : In the initial experimental stage, calibration values for each measurement apparatus were assumed to be almost identical. However, using the SUS-304 samples as a reference, the calibration values for the four different measurement apparatuses were found to range from 3.49 to $8.86{\times}10^{-6}m/m/^{\circ}C$. Using different adjusted values for each measurement apparatuses, COTE values for the three different concrete specimens were obtained. The COTE value of concrete made with natural coarse aggregate was $9.91{\times}10^{-6}m/m/^{\circ}C$, that of job-site produced recycled coarse aggregate was $10.45{\times}10^{-6}m/m/^{\circ}C$, and that of recycled aggregate processed from the intermediate waste treatment company was $10.82{\times}10^{-6}m/m/^{\circ}C$. CONCLUSIONS : We observed that the COTE value of concrete made from recycled concrete aggregates (RCA) was higher than that of concrete made from natural coarse aggregate. This difference is due to the fact that the total volumetric mortar proportion in the RCA mix is higher than that in the concrete mix made with natural coarse aggregate.

키워드

참고문헌

  1. AASHTO TP 60-00. (2000) Standard Test Method for the Concrete at Atmospheric Pressure, ACI, State-of-the-Art, Manual of Concrete Practice, Part 5.
  2. Abbas, A. (2007) Durability of Green Concrete as a Structural Materials, Ph.D Dissertation, Carleton University, Canada.
  3. Abbas, A., Fathifazl, G., Isgor, O.B., Razaqpur, A.G., Fournier, B. and Foo, S. (2008) Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates, Journal of ASTM International, Vol. 5, No. 1, pp. 1-12.
  4. Byfors, J. (1980) Plain Concrete at Early Ages, Swedish Cement and Concrete Research Institute, Sweden.
  5. Carpenter, A. and Gardner, K. (2007) Recycled Material Highway Construction Environmental Assessment: Life Cycle Based Risk Assessment of Recycled Materials in Roadway Construction, RMRC Project No. 43, Recycled materials Resource Center, University of New Hampshire.
  6. Choi, S. and Moon, W. (2009) Performance of Continuously reinforced Concrete Pavement Containing Recycled Concrete Aggregate, GeoHunan International Conference, pp.165-172.
  7. Cho, Y. et al. (2012) Development of Pavement Reconstruction Methodology for Sustainable Green Airport, Interim Research Report, Korea Institute of Construction & Transportation Technology Evaluation and Planning.
  8. Du, L. and Lukefah, E. (2007) Coefficient of Thermal Expansion of Concrete with Different Coarse Aggregates, Paper presented at the Annual Symposium of the International Center for Aggregates Research, Austin, Texas.
  9. Fathifazl, G. (2008) Structural Performance of Steel Reinforced Recycled Concrete Members, Ph.D Dissertation, Carleton University, Canada.
  10. Fathifazl, G., Abbas, A., Razaqpur, A.G., Isgor, O.B., Fournier, B. and Foo, S. (2009) New Mixture Proportioning Method for Concrete Made with Coarse Recycled Concrete Aggregate, Journal of Materials in Civil Engineering, ASCE, Vol. 21, No. 10, pp.601-611. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:10(601)
  11. Kim, J., Shim, J. and Cho, K. (2004) The Site Application by using the Recycled Concrete Aggregate, Research Report ME-04-13, Korea Highway Corporation.
  12. Kim, J., Yang, S. and Kim, N. (2003) Influencing Factor on thermal Coefficient of Concrete due to Aggregate Type, Spring Conference of the Korean Concrete Institute, Vol.15, No.1, pp.249-254.
  13. Lee, H. (2003) A Study on the Material Property of Concrete according to Environment Loads, Masters Thesis, Hongik University.
  14. McCullough, B. F. and Dossey, T. (1999) Considerations for High-Performance Concrete Paving: Recommendations from 20 Years of Field Experience in Texas, Transportation Research Record, No. 1684, pp. 17-24. https://doi.org/10.3141/1684-03
  15. Mindess, S., Young, J.F. and Darwin, D. (2003) Concrete, 2nd Ed., Prentice Hall.
  16. Ministry of Land, Transportation and Maritime Affairs (2013) MLTM 2013: Regulations on the Mandatory Use of Recycled Aggregates for Construction Projects.
  17. Nam, J., An, D. and Kim, Y. (2013) Coefficient of Thermal Expansion Measurement of Concrete using Electrical Resistance Strain Gauge, Int. J. Highw. Eng., Vol.15, No.6, pp.25-32. https://doi.org/10.7855/IJHE.2013.15.6.025
  18. Park, J., Lee, H., Yang, S., Kang, S. and Kim, I. (2013) Thermal Expansion Coefficient of Concrete Using Job-site Processed Recycled Aggregates,
  19. Park, J. (2013) Mechanical Strength and Durability Tests on Concrete Mixes Using Recycled Aggregates, Masters Thesis, Hongik University.

피인용 문헌

  1. The Effect of the Residual Mortar of Recycled Concrete Aggregate on Alkali Silica Reaction vol.17, pp.4, 2015, https://doi.org/10.7855/IJHE.2015.17.4.019