DOI QR코드

DOI QR Code

Experimental study on lead extrusion damper and its earthquake mitigation effects for large-span reticulated shell

  • Yang, M.F. (Key Laboratory of C&PC Structures of the Ministry of Education, Southeast University) ;
  • Xu, Z.D. (Key Laboratory of C&PC Structures of the Ministry of Education, Southeast University) ;
  • Zhang, X.C. (Key Laboratory of C&PC Structures of the Ministry of Education, Southeast University)
  • 투고 : 2012.11.11
  • 심사 : 2014.07.29
  • 발행 : 2015.02.25

초록

A Lead Extrusion Damper (LED) is experimentally studied under various frequencies and displacement amplitudes. Experimental results show that the force-displacement hysteresis loops of the LED are close to rectangular and the force-velocity hysteresis loops exhibit nonlinear hysteretic characteristic. Also, the LED can provide consistent energy dissipation without any stiffness degradation. Based on the experimental results, a mathematical model is then proposed to describe the effects of frequency and displacement on property of LED. It can be proved from the comparison between experimental and numerical results that the mathematical model can accurately describe the mechanical behavior of LED. Subsequently, the seismic responses of the Schwedler reticulated shell structure with LEDs are analyzed by ANSYS software, in which three different installation forms of LEDs are considered. It can be concluded that the LED can effectively reduce the displacement and acceleration responses of this type of structures.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation, National Construction Ministry

참고문헌

  1. Aida, T., Aso, T., Nakamoto, K. and Kawazoe, K. (1998), "Vibration control of shallow shell structures using a shell-type dynamic vibration absorber", J. Sound Vib., 218(2), 245-267. https://doi.org/10.1006/jsvi.1998.1829
  2. Bel Hadj Ali, N. and Smith, I.F.C. (2010), "Dynamic behavior and vibration control of a tensegrity structure", Int. J. Solids Struct., 47(9), 1285-1296. https://doi.org/10.1016/j.ijsolstr.2010.01.012
  3. Bradley, B.A., Dhakal, R.P., Mander, J.B. and Li, L. (2008), "Experimental multi-level seismic performance assessment of 3D RC frame designed for damage avoidance", Earthq. Eng. Struct. Dyn., 37(1), 1-20. https://doi.org/10.1002/eqe.741
  4. Cousins, W.J. and Porritt, T.E. (1993), "Improvements to lead-extrusion damper technology", Bulletin of the New Zealand National Society for Earthquake Engineering, 26(3), 342-348.
  5. Garlock, M.M., Ricles, J.M. and Sause, R. (2005), "Experimental studies of full-scale posttensioned steel connections", J. Struct. Eng., 131(3), 438-448. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:3(438)
  6. Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer, B.F. and Yao, J.T.P. (1997), "Structural control: past, present and future", J. Eng. Mech., ASCE, 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
  7. Kato, S., Kim, Y.B., Nakazawa, S. and Ohya, T. (2005), "Simulation of the cyclic behavior of J-shaped steel hysteresis devices and study on the efficiency for reducing earthquake responses of space structures", J. Construct. Steel Res., 61(10), 1457-1473. https://doi.org/10.1016/j.jcsr.2005.03.006
  8. Karolczuk, A. and Macha, E. (2005), "A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials", Int. J. Fract., 134(3), 267-304. https://doi.org/10.1007/s10704-005-1088-2
  9. Manenti, S., Bontempi, F. and Malerba P.G. (2010), "A special kind of analysis: CFD modeling for design and assessment of bridge active control devices" Proceedings of the Fifth International Conference on Bridge Maintenance, Safety, Management and Life-Cycle Optimization, Philadelphia, PA, USA, July, CRC Press, Taylor & Francis Group, pp. 1436-1443.
  10. Parulekar, Y.M., Reddy, G.R., Vaze, K.K. and Kushwaha, H.S. (2004), "Lead extrusion dampers for reducing seismic response of coolant channel assembly", Nucl. Eng. Des., 227(2), 175-183. https://doi.org/10.1016/j.nucengdes.2003.09.006
  11. Robinson, W.H. and Greenbank, L.R. (1976), "Extrusion energy absorber suitable for the protection of structures during an earthquake", Earthq. Eng. Struct. Dyn., 4(3), 251-259. https://doi.org/10.1002/eqe.4290040306
  12. Rodgers, G.W., Denmead, C., Leach, N., Chase, J.G. and Mander, J.B. (2006), "Experimental development and analysis of a high force/volume extrusion damper", Proceedings of New Zealand Society for Earthquake Engineering Annual Conference, Napier, New Zealand, March.
  13. Rodgers, G.W., Mander, J.B., Chase, J.G., Dhakal, R.P., Leach, N.C. and Denmead, C.S. (2008), "Spectral analysis and design approach for high force-to-volume extrusion damper-based structural energy dissipation", Earthq. Eng. Struct. Dyn., 37(2), 207-223. https://doi.org/10.1002/eqe.752
  14. Towashiraporn, P., Park, J., Goodno, B.J. and Craig, J.I. (2002), "Passive control methods for seismic response modification", Prog. Struct. Eng. Mater., 4(1), 74-86. https://doi.org/10.1002/pse.107
  15. Tsai, C.S., Lai, W.S., Chang, C.W. and Li, M.C. (2002), "Testing and analysis of a new Lead-extrusion damper American Society of Mechanical Engineers", ASME 2002 Pressure Vessels and Piping Conference, Vancouver, BC, Canada, August, pp. 215-220.
  16. Wu, T. (2008), "A proposed methodology for strain-based failure criteria", ASME 2008 Pressure Vessels and Piping Conference, Chicago, IL, USA, July, Volume 7, pp. 631-637.
  17. Xu, Z.D. (2009), "Horizontal shaking table tests on structures using innovative earthquake mitigation devices", J. Sound Vib., 325(1-2), 34-48. https://doi.org/10.1016/j.jsv.2009.03.019
  18. Xu, Z.D., Shi, B.Q., Wu, K.Y. and Zeng, X. (2009a), "Vertical shaking table tests on the structure with viscoelastic multi-dimensional earthquake isolation and mitigation devices", Science in China, Series E: Technological Sciences, 52(10), 2869-2876. https://doi.org/10.1007/s11431-009-0092-6
  19. Xu, Z.D., Zeng, X., Wu, K.Y., Li, A.Q. and Xu, Q.Y. (2009b), "Horizontal shaking table tests and analysis on structures with multi-dimensional earthquake isolation and mitigation devices", Science in China, Series E: Technological Sciences, 52(7), 2009-2016. https://doi.org/10.1007/s11431-009-0149-6

피인용 문헌

  1. Experimental study and numerical simulation of clapboard lead damper vol.231, pp.9, 2017, https://doi.org/10.1177/0954406215621339
  2. Experimental and numerical studies on a composite MR damper considering magnetic saturation effect vol.132, 2017, https://doi.org/10.1016/j.engstruct.2016.11.055
  3. Nonlinear spectral design analysis of a structure for hybrid self-centring device enabled structures vol.61, pp.6, 2017, https://doi.org/10.12989/sem.2017.61.6.701
  4. Improving cyclic behavior of multi-level pipe damper using infill or slit diaphragm inside inner pipe vol.64, pp.2, 2015, https://doi.org/10.12989/sem.2017.64.2.195