DOI QR코드

DOI QR Code

Recommended properties of elastic wearing surfaces on orthotrotropic steel decks

  • 투고 : 2014.05.29
  • 심사 : 2014.07.17
  • 발행 : 2015.02.25

초록

Orthotropic decks composed of deck plate, ribs, cross beams and wearing surface are frequently used in industry to span long distances due to their light structures and load carrying capacities. As a result they are broadly preferred in industry and there are a lot of bridges of this type exist in the world. Nevertheless, some of them cannot sustain the anticipated service life and damages in form of cracks develop in steel components and wearing surface. Main reason to these damages is seen as the repetitive wheel loads, namely the fatigue loading. Solutions to this problem could be divided into two categories: qualitative and quantitative. Qualitative solutions may be new design methodologies or innovative materials, whereas quantitative solution should be arranging dimensions of deck structure in order to resist wheel loads till the end of service life. Wearing surface on deck plate plays a very important role to avoid or mitigate these damages, since it disperses the load coming on deck structure and increases the bending stiffness of deck plate by forming a composite structure together with it. In this study the effect of Elastic moduli, Poisson ratio and thickness of wearing surface on the stresses emerged in steel deck and wearing surface itself is investigated using a FE-model developed to analyze orthotropic steel bridges.

키워드

참고문헌

  1. AISC (1963), Design Manual for Orthotropic Steel Plate Deck Bridges, American Institute of Steel Construction, Chicago, IL, USA.
  2. ANSYS (2010), User Manuals, Swanson Analysis Systems, USA.
  3. Aoki, Y., Ishikawa, T., Banno, R., Kawano, H. and Adachi, Y. (2013), "Assessment, upgrading and refurbishment of infrastructures", IABSE Symposium, Rotterdam, Netherlands, May.
  4. Aygul, M., Al-Emrani, M. and Urushadze, S. (2012), "Modelling and fatigue life assessment of orthotropic bridge deck details using FEM", International Journal of Fatigue, 40, 129-142. https://doi.org/10.1016/j.ijfatigue.2011.12.015
  5. Braam, C.R. and Mulder, R. (2002), "Contec-Onderzoek kubussen en prisma's, Bepaling druksterkte en elasticiteitsmodule", Rapport 25.5-02-12, Delft, Netherlands. [In Dutch]
  6. Buitelaar, P. (2002), "Ultra thin heavy reinforced high performance concrete overlays", Proceedings of the 6th International Symposium on Utilization of High Strength / High Performance Concrete, Leipzig, Germany.
  7. Buitelaar, P., Braam, R. and Kaptijn, N. (2004), "Reinforced high performance concrete overlay system for rehabilitation and strengthening of orthotropic steel bridge decks", Proceedings of 2008 Orthotropic Bridge Conference, ASCE, Sacramento, CA, USA, August.
  8. Choi, D., Kim, Y., Yoo, H. and Seo, J. (2008), "Orthotropic steel deck bridges in Korea", Proc. of 2008 Orthotropic Bridge Conference, ASCE, Sacramento, CA, USA, August.
  9. Connor, R., Fisher, J., Gatti, W., Gopalaratnam, V., Kozy, B., Leshko, B., McQuaid, D.L., Medlock, R., Mertz, D., Murphy, T., Paterson, D., Sorensen, O. and Yadlosky, J. (2012), "Manual for Design, Construction, and Maintenance of Orthotropic Steel Deck Bridges", U.S. Department Of Transportation Federal Highway Administration, Publication No. FHWA-IF-12-027, Washington, D.C., USA.
  10. Erdogan, S.T. and Erdogan, T.Y. (2006), Sorular ve Yanitlariyla Beton, Turkiye Hazir Beton Birligi, Istanbul, Turkey. [In Turkish]
  11. Eurocode 1 Part 2 (2003), Actions on structures - Traffic loads on bridges, European Committee for Standardization, Brussel, Belgium.
  12. Eurocode 3 Part 1-1 (2001), Design of steel structures - General structural rules, European Committee for Standardization, Brussel, Belgium.
  13. Eurocode 3 Part 1-9 (2003), Design of steel structures - Fatigue, European Committee for Standardization, Brussel, Belgium.
  14. Fettahoglu, A. (2012), "Effect of deck plate thickness on the structural behaviour of steel orthotropic highway bridges", Advanced in Civil Engineering, Ankara Turkey, October.
  15. Fettahoglu, A. (2013a), "Arranging thicknesses and spans of orthotropic deck for desired fatigue life and design category", Int. J. Adv. Eng. Tech., 6(4), 1512-1523.
  16. Fettahoglu, A. (2013b), "A FEA study conforming recommendations of DIN FB 103 regarding rib dimensions and cross-beam span", Int. J. Civil Eng. Res., 4(3), 197-204.
  17. Fettahoglu, A. (2013c), "Assessment on web slope of trapezoidal rib in orthotropic decks using FEM", Sigma, J. Eng. Natural Sci., 32(1), 52-59.
  18. Fettahoglu, A. (2014a), "Effect of cross-beam on stresses revealed in orthotropic steel bridges", Steel Compos. Struct., Int. J., 18(1), 149-163.
  19. Fettahoglu, A. (2014b), "Optimizing rib width to height and rib spacing to deck plate thickness ratios in orthotropic decks", Struct. Eng. Mech., Int. J., Rejected.
  20. Fettahoglu, A. and Bekiroglu, S. (2012), "Effect of kinematic hardening in stress calculations", Advanced in Civil Engineering, Ankara, Turkey, October.
  21. Fujino, Y. and Yoshida, Y. (2002), "Wind-induced vibration and control of Trans-Tokyo Bay Crossing Bridge", J. Struct. Eng., 128(8), 1012-1025. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1012)
  22. Han, B., Pu, Q.H., Shi, Z., Gao, L.Q. and Zhou, Y. (2013), "Study on orthotropic deck plate fatigue test model scheme of box girder of railway cable-stayed bridge", Appl. Mech. Mater., 361-363, 1199-1205. https://doi.org/10.4028/www.scientific.net/AMM.361-363.1199
  23. Honshu Shikoku Bridge Authority (2005), Accessed on January 17, 2005. www.hsba.go.jp
  24. Hoopah, W. (2004), "Orthotropic decks for small and medium span bridges in France - Evolution and recent trends", Proceedings of 2004 Orthotropic Bridge Conference, ASCE, Sacramento, CA, USA, August.
  25. Huang, C. and Mangus, A. (2008), "Redecking existing bridges with orthotropic steel deck panels", Proceedings of 2008 Orthotropic Bridge Conference, ASCE, Sacramento, CA, USA, August.
  26. Huurman, M., Medani, T.O., Molenaar, A.A.A., Kasbergen, C., Liu, X. and Scarpas, A. (2002), "3D-FEM for the estimation of the behaviour of asphaltic surfacings on orthotropic steel deck bridges", Proceedings of the 3rd International Symposium on 3D Finite Element for Pavement Analysis, Design & Research, Amsterdam, Netherlands, April.
  27. Jong, F.B.P.de (2007), "Renovation techniques for fatigue cracked orthotropic steel bridge decks", Ph.D. Dissertation, Delft University of Technology, Delft, Netherlands.
  28. Kennedy, D.J.L., Dorton, R.A. and Alexander, S.D.B. (2002), "The sandwich plate system for bridge decks", International Bridge Conference, Pittsburgh, PA, USA, June.
  29. Korniyiv, M. (2004), "Orthotropic deck bridges in Ukraine", Proceedings of 2004 Orthotropic Bridge Conference, ASCE, Sacramento, CA, USA, August.
  30. Kozy, B., Connor, R., Paterson, D. and Mertz, D. (2011), "Proposed revisions to AASHTO-LRFD bridge design specifications for orthotropic steel deck bridges", J. Bridge Eng., 16, 759-767. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000214
  31. Luo, R.D., Ye, M.X. and Zhang, Y.Z. (2010), "Study on influences of thickness of flange of U rib on mechanical behaviors of orthotropic monolithic steel bridge deck system", Adv. Mater. Res., 163-167, 122-126. https://doi.org/10.4028/www.scientific.net/AMR.163-167.122
  32. Pouget, S., Suzeat, C., Di Benedetto, H. and Olard, F. (2012), "Modelling of viscous bituminous wearing course materials on orthotropic steel deck", Mater. Struct., 45(7), 1115-1215. https://doi.org/10.1617/s11527-011-9820-z
  33. Poulis, J.A., Borger, D.P. and de Regt, P. (2000), Metingen Rijkswaterstaat, Het verlijmen van diverse materialen op staalplaten ten behoeve van brugdekversteviging, Rapport HI 2079, Delft, Netherlands. [In Dutch]
  34. Sika (2006), Accessed on January 13, 2006. [In Dutch] www.sika.nl/tds_sikadur30_nl.pdf
  35. Sim, H. and Uang, C. (2012), "Stress analyses and parametric study on full-scale fatigue tests of rib-to-deck welded joints in steel orthotropic decks", J. Bridge Eng., 17(5), 765-773. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000307
  36. Troitsky, M.S. (1987), Orthotropic Bridges Theory and Design, (2nd Edition), The James F. Lincoln Arc Welding Foundation, Cleveland, OH, USA.
  37. Virlogeux, M. (2004), "The viaduct over the River Tarn", Conference Proceedings Steelbridge, OTUA, Paris, France, June.
  38. Wolchuk, R. (2014), "Empirical design rules for effective utilization of orthotropic decks", J. Bridge Eng., 19(2), 152-158. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000462
  39. Yamada, K. and Ishikawa, T. (2011), "Fatigue evaluation of rib-to-deck welded joints of orthotropic steel bridge deck", J. Bridge Eng., 16(4), 492-499. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000181

피인용 문헌

  1. Bending performance of steel–polyurethane sandwich plate under local distributed load vol.20, pp.11, 2017, https://doi.org/10.1177/1369433216687567
  2. An experimental and numerical study on the behavior of a continuous orthotropic bridge deck with sandwich construction vol.111, 2017, https://doi.org/10.1016/j.tws.2016.11.015