DOI QR코드

DOI QR Code

반경 방향으로 자화된 Tubular 타입 자기 커플링의 특성 해석

Characteristics Analysis of Radially Magnetized Tubular type Magnetic Coupling

  • Kim, Chang-Woo (Dept. of Electrical and Electronic Engineering, Chung Nam University) ;
  • Jung, Kyoung-Hun (Institute. of technology, Hanon systems) ;
  • Choi, Jang-Young (Dept. of Electrical and Electronic Engineering, Chung Nam University)
  • 투고 : 2015.07.09
  • 심사 : 2015.10.21
  • 발행 : 2015.11.01

초록

Magnetic coupling is used where required high reliability. because magnetic coupling's durability is stronger than mechanical coupling's durability. This paper shows the characteristics of radially magnetized tubular type magnetic coupling by using Analytical method such as space harmonic method. Analytical method was used, to find force characteristics. First, on the basis of the magnetic vector potential and two-dimensional(2-D) polar-coordinate system, the magnetic field solutions of the radially magnetized permanent magnet are obtained. And we obtain the analytical solutions for the flux density produced by permanent magnet. Finally, we can calculate the force by using the Maxwell stress tensor. And then, Finite element method(FEM) is used to validate force characteristics.

키워드

참고문헌

  1. M. Leijon,, H. Bernhoff, O. Agren, J. Isberg, J. Sundberg, M. Berg, K. Karlsson and A. Wolfbrandt " Multiphysics simulation of wave energy to electric energy conversion by permanent magnet linear generator," IEEE Trans., on Energy Convers., vol. 20, no. 1, pp.219-224. 2005. https://doi.org/10.1109/TEC.2004.827709
  2. J. F. Eastham, "Novel synchronous machines : Linear and disc," IEEE Proc. Electr. Power Appl., vol. 137, pp 49-58, 1990. https://doi.org/10.1049/ip-b.1990.0005
  3. Ashabani, M., Milimonfared, J., Shokrollahi-Moghani, J., Taghipour, S. and Aghashabani, M., "Mitigation of cogging force in axially magnetized tubular permanent-magnet machines using iron pole-piece slotting," IEEE Trans. on Magn., vol. 44, pp. 2158-2162, 2008 https://doi.org/10.1109/TMAG.2008.2001288
  4. W. Jiabin, W. Weiya, G. W. Jewell, and D. Howe, "A low-power, linear, permanent-magnet generator/energy storage system," Industrial Electronics, IEEE Trans. on Magn., vol. 49, pp. 640-648, 2002. https://doi.org/10.1109/TIE.2002.1005391
  5. Romain Ravaud, Valerie Lemarquand, and Guy Lemarquand, "Analytical Design of Permanet Magnet Radial Couplings," IEEE Trans. on Magn, vol.46, no.11, pp.3860-3865, 2010. https://doi.org/10.1109/TMAG.2010.2056379
  6. W. Wu. H. C. Lovatt, and J. B. Dunlop, "Analysis and Design Optimisation of Magnetic Couplings Using 3D Finite Element Modeling," IEEE Trans., on Magn., vol. 33, no. 5, pp.4083-4085, 1997. https://doi.org/10.1109/20.619670
  7. Seok-Myeong Jang, Jang-Young Choi, and Sang-Sub Jeong "Electromagnetic Analysis and Control Parameter Estimation of Moving-Coil Linear Oscillatory Actuator," J. Appl. Phys., vol. 99, no 8, 08R307, April 2006. https://doi.org/10.1063/1.2165606
  8. Boldea and S. A. Nasar, "Linear electric actuators and generators," IEEE Trans. Energy Conv., vol. 14, no. 3, pp.712-716, 1999. https://doi.org/10.1109/60.790940
  9. Jiabin Wang, Geraint W. Jewell and David Howe, "A General Framework for the Analysis and Design of Tubular Linear Permanent Magnet Machines," IEEE Trans. on Magn, vol.35, no.3, pp. 1868-2000, May, 1999.
  10. J. Y. Choi, S. M. Jang, "Analytical magnetic torque calculation and experimental testing of radial flux permanent magnet-type eddy current brakes," Journal of Applied Physics., vol.111, no.7, pp.07E712-07E712-3, 2011.
  11. Zachary S. Sacks, David M. Kingsland, Robert Lee, and Jin-Fa Lee, "A Perfectly Matched Anisotropic Absorber for Use an Absorbing Boundary Condition," IEEE Trans., on ANTHENNAS and PROGATION, vol. 43, no. 12, pp. 1460-1463, 1995 https://doi.org/10.1109/8.477075
  12. Harry Contopanagos, Benjamin Dembart, Michael Epton, John J. Ottusch, Vladimir Rokhlin, John L. Visher, and Stephen M. Wandzura, "Well-Conditioned Boundary Integral Equations for Three-Dimensional Electromagnetic Scattering," IEEE Trans., on ANTHENNAS and PROGATION, vol. 50, no. 12, pp. 1824-1830, 2002 https://doi.org/10.1109/TAP.2002.803956
  13. David L. Trumper, Won-jong Kim, and Mark E. Williams, "Design and Analysis Framework for Linear Permanent-Magnet Machines," IEEE, Trans. IAS, vol.32, pp. 371-379, 1996
  14. Meessen,K.J, Paulides, J.J.H, and Lomonova, E.A, "Force Calculations in 3D Cylindrical Structures Using Fourier Analysis and the Mawell Stress Tensor," IEEE Trans., on Magn., vol.49, no.1, pp.536-545, 2012. https://doi.org/10.1109/TMAG.2012.2206821
  15. Y. S. Chen, and Z. Q. Zhu, "Investigation of Magnetic Drag Torque in Permanent Magnet Brushless DC Motors," IEEE Trans., on Magn., vol. 43, no. 6, June 2007.