참고문헌
- ACI Committee 318 (2011). Building code requirement for reinforced concrete and commentary (318R-01), ACI, Detroit, M.I., 391., pp. 120-150.
- ASCE-ACI Committee 426 (1973). "The shear strength of reinforced concrete members." Journal of Structural Division, ASCE, Vol. 99, No. 6, pp. 1091-1187.
- ASCE-ACI Committee 445 (1998). "Recent approaches to shear design of structural concrete." Journal of Structural Engineering, ASCE, Vol. 124, No. 5, pp. 1375-1417. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1375)
- Cervenka, V. (2000). ATENA program documentation, Cervenka Consulting, pp. 10-120.
- Comite Euro International Du Beton (CEB/FIP) (2010). "CEB-FIP model code for concrete structures." Bulletin d'Information, No. 124/125, pp. 437.
- Commission of the European Communities (1991). Eurocode No. 2: Design of Concrete Structures, Part 1: General rules and Rules for Buildings, ENV 1992-1-1, pp. 253.
- Gupta, P. R., and Collins, M. P. (2001). "Evaluation of shear design procedures for reinforced concrete members under axial compression." ACI Structural Journal, Vol. 98, No. 4, pp. 537-547.
- Hsu, T. T. C. (1993). Unified theory of reinforced concrete, CRC Press, Boca Raton, Fla, pp. 193-256.
- Jeong, J.-P. and Kim, W. (2014). "Shear resistant mechanism into base components : Beam Action and Arch Action in Shear-Critical RC Members." International Journal of Concrete Structures and Materials, Vol. 8, No. 1, pp. 1-14. https://doi.org/10.1007/s40069-013-0064-x
- Kim, W. and Jeong, J.-P. (2011a). "Decoupling of arch action in shear-critical reinforced concrete beam." ACI Structural Journal, Vol. 108, No. 4, pp. 395-404.
- Kim, W. and Jeong, J.-P. (2011b). "Non-bernoulli-compatibility truss model for RC member subjected to combined action of flexure and shear, Part I-Its derivation of theoretical concept." KSCE Journal of Civil Engineering, Vol. 15, No. 1, pp. 101-108. https://doi.org/10.1007/s12205-011-0662-6
- Kim, W. and Jeong, J.-P. (2011c). "Non-bernoulli-compatibility truss model for RC member subjected to combined action of flexure and shear, Part II-Its practical solution." KSCE Journal of Civil Engineering, Vol. 15, No. 1, pp. 109-117. https://doi.org/10.1007/s12205-011-0663-5
- Kotsovos, G. M. and Kotsovos, M. D. (2013). "Effect of axial compression on shear capacity of linear RC members without transverse reinforcement." Magagine of Concrete Research, Vol. 65, No. 21, pp. 1360-1375. https://doi.org/10.1680/macr.13.00192
- Lorentsen, M. (1965). "Theory for the combined action of bending moment and shear in reinforced concrete and prestressed concrete beams." ACI Journal, Vol. 62, No. 4, pp. 403-419.
- Marti, P. (1985). "Basic tools of reinforced concrete beam design." ACI Journal, Vol. 82, No. 1, pp. 46-56.
- Niwa, J. (1997). "Lattice model with concrete tension members for shear resisting mechanism of concrete beams." CEB Bulletin d'Information, No. 237, pp. 159-170.
- Park, R. and Paulay, T. (1975). Reinforced concrete structures, Wiley, N. Y., pp. 201-256.
- Ramirez, J. A. and Breen, J. A. (1991). "Evaluation of a modified truss model approach for beams in shear." ACI Structural Journal, Vol. 88, No. 5, pp. 562-571.
- Vecchio, F. J. and Collins, M. P. (1986). "The modified compression field theory for reinforced concrete elements subjected to shear." ACI Structural Journal, Vol. 83, No. 2, pp. 219-231.
- Xie, L., Bentz, E. C. and Collins, M. P. (2011). "Influence of axial stress on shear response of reinforced concrete elements." ACI Structural Journal, Vol. 108, No. 6, pp. 745-754.