DOI QR코드

DOI QR Code

Analysis of Induction Heating according to Coil Shapes on the V-groove Weld Joint

V-groove를 가진 모재에서 코일 형상에 따른 유도가열 해석

  • Ahn, Soo Deok (Department of Mechanical Engineering, Changwon National University) ;
  • Cho, Young Tae (Department of Mechanical Engineering, Changwon National University) ;
  • Jung, Yoon Gyo (Department of Mechanical Engineering, Changwon National University)
  • Received : 2014.12.08
  • Accepted : 2015.01.23
  • Published : 2015.02.01

Abstract

In order to prevent crack in thick weld zones, the preheating process such as induction and gas torch heating needs to be applied. Among them induction heating is the most effective heat source because it has rare thermal effect and very rapid heating characteristics. In this paper, when the induction heating method is used to improve arc welding, the temperature distribution and magnetic field density of the welding zones are analyzed by simultaneously solving heat transfer and electromagnetic field equation. In particular, cone and flat type coils are designed and induction heating effects of each type are compared to identify heating characteristics on a V-groove weld joint. As a result, a cone shape coil is more efficient in the preheating process. When induction heating and arc welding system is designed for thick plate with V-groove weld joint, the results in this paper could be applied.

Keywords

References

  1. Yang, Y. S., Bae, K. Y., and Shin, H. Y., "Effects of Inductor Shape in Steel Forming Process with High Frequency Induction Heating," J. of KWJS, Vol. 26, No. 4, pp. 76-76, 2008.
  2. Bae, K. Y., Yang, Y. S., Hyun, C. M., Won, S. H., and Cho, K. Y., "Derivation of Simplified Formulas to Predict Deformations of Plate in Steel Forming Process with Induction Heating," J. of KWJS, Vol. 25, No. 4, pp. 58-64, 2007. https://doi.org/10.5781/KWJS.2007.25.4.058
  3. Stein, J. and Kalage, P., "Induction Assisted Welding Technologies in Steel Utilization," European Union, pp. 18-131, 2010.
  4. COMSOL. INC, "Inductive Heating of a Steel Billet," http://www.comsol.com/model/inducive-heating-of-a -steel-billet-330 (Accessed JAN. 23)
  5. Park, M. H., Lee, S. S., Kang, H. B., Pack, I. S., Song, J. H., and Lee, D. U., "A Study on Analysis of Temperature of Target Material for Hardening in High Frequency Induction Heating," Proc. of KSPE Spring Conference, pp. 697-698, 2013.
  6. Hayt, W. and Buck, J., "Engineering Electromagnetics 7th," McGraw-Hill Korea, pp. 319-340, 2012.
  7. Cengel, Y. A., "Heat Transfer : A Practical Approach," McGraw-Hill Korea, pp. 113-280, 2009.
  8. Park, K., Hwang, J. J., Kwon, O. K., and Yun, J. H., "Finite Element Analysis of Induction Heating Process for Development of Rapid Mold Heating System," Transactions of Materials Processing, Vol. 16, No. 2, pp. 113-119, 2007. https://doi.org/10.5228/KSPP.2007.16.2.113
  9. COMSOL. INC, "Single-turn and Multi-turn Coil Domains in 3D," http://www.comsol.com/model/ single-turn-and-multi-turn-coil-domains-in-3d-14067 (Accessed JAN. 23)
  10. Choi, W. D., Ko, D. C., Min, G. S., Kim, B. M., and Choi, J. C., "Finite Element Analysis for Forming Process of Semi-Solid Material Considering Induction Heating," J. Korean Soc. Precis. Eng., Vol. 14, No. 8, pp. 82-91, 1997.
  11. Reis, R. P., Scotti, A., Norrish, J., and Cuiuri D., "Investigation on Welding Arc Interruptions in the Presence of Magnetic Fields: Welding Current Influence," IEEE Transactions on Plasma Science, Vol. 40, No. 3, pp. 870-876, 2012. https://doi.org/10.1109/TPS.2012.2182781

Cited by

  1. Characterization of Cold Metal Transfer Welding Coated Steel vol.32, pp.10, 2015, https://doi.org/10.7736/KSPE.2015.32.10.891
  2. Simulation of Thick Plate Preheating Process Using Induction Heating vol.32, pp.12, 2015, https://doi.org/10.7736/KSPE.2015.32.12.1017