반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

Al 6061의 드릴가공에서 공구코팅과 공정변수가 표면정도에 미치는 영향

Effect of Coating and Machining Parameters on Surface Finish in Dry Drilling of Aluminium 6061

  • 최만성 (한국기술교육대학교 메카트로닉스공학부)
  • Choi, Man Sung (School of Mechatronics Engineering, Korea University of Technology and Education)
  • 투고 : 2015.06.03
  • 심사 : 2015.06.22
  • 발행 : 2015.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the performance of uncoated- and Titanium nitride aluminium TiAlN-PVD coated- carbide twist drills were investigated when drilling aluminium alloy, Al 6061. This research focuses on the optimization of drilling parameters using the Taguchi technique to obtain minimum surface roughness and thrust force. A number of drilling experiments were conducted using the L9 orthogonal array on a CNC vertical machining center. The experiments were performed on Al 6061 material l blocks using uncoated and coated HSS twist drills under dry cutting conditions. Analysis of variance(ANOVA) was employed to determine the most significant control factors. The main objective is to find the important factors and combination of factors influence the machining process to achieve low surface roughness and low cutting thrust force. From the analysis of the Taguchi method indicates that among the all-significant parameters, feed rate are more significant influence on surface roughness and cutting thrust than spindle speed.

키워드

참고문헌

  1. Tonshoff. K., Spintig. W., Konig. W., "A. Machining of Holes Developments in Drilling Technology", Ann. CIRP Vol. 43, No. 2, pp. 551-561, 1994. https://doi.org/10.1016/S0007-8506(07)60501-0
  2. Feng. C.X.J., Wang. X., "Development of Empirical Models for Surface Roughness Prediction in Finish Turning," International Journal of Advanced Manufacturing Technology Vol. 20, pp. 348-356, 2002. https://doi.org/10.1007/s001700200162
  3. Chen. J. C., Lou. M. S.,"Fuzzy-Nets Based Approach to using an Accelerometer for an in-Process Surface Roughness Prediction System in Milling Operation," Int. Journal of Computer Integrated Manufacturing, Vol. 13, pp.358-368, 2000. https://doi.org/10.1080/095119200407714
  4. Osman M.O.M., Latinovic V., Greuner B., "On the Performance of Cutting Fluids for BTA Deep-Hole Machining of Cutting Fluids for BTA Deep-Hole Machining," Int. J. Prod. Res., Vol. 19, No. 5, pp. 491-503, 1981. https://doi.org/10.1080/00207548108956680
  5. Frelle. H., "Progress in Physical Vapor Deposited Wear Resisting Coatings on Tools and Components", Ann. CIRP Vol. 37, pp. 165-169, 1988. https://doi.org/10.1016/S0007-8506(07)61610-2
  6. Hedenqvist. P., Olesson. M., Wallen. P., Kassman. A., Hogmark. S. Jacobson. S., "How TiN Coatings Improve the Performance of High Speed Steel Cutting Tools", Surface Coatings Technol. Vol. 41, pp. 243-256, 1990. https://doi.org/10.1016/0257-8972(90)90172-9
  7. Young. C.T., Rhee. S. K., "TiN Coatings on Drills for Wear Reduction", Sov. J. Friction Wear, Vol. 7, No. 1, pp. 26-30, 1986.
  8. Kurt. M., Bagci. E., Kaynak. Y., "Application of Taguchi Methods of Cutting Parameters for Surface Finish and Hole Diameter Accuracy in Dry Drilling Processes," International Journal of Advanced Manufacturing Tech. Vol. 40, pp. 458-469, 2009. https://doi.org/10.1007/s00170-007-1368-2
  9. Tsao. C. C., Hocheng. H., "Evaluation of Thrust Force and Surface Roughness in Drilling Composite Material using Taguchi Analysis and Neural Network", Journal of Materials Processing Technology Vol. 203, pp. 342-348, 2008. https://doi.org/10.1016/j.jmatprotec.2006.04.126
  10. Asilturk. I., Akkus. H., "Determining the Eeffect of Cutting Parameters on Surface Roughness in Hard Turning using the Taguchi Method", Measurement Vol. 44, pp. 1697-1704, 2011.