Smart Structures and Systems

  • 제15권1호
  • /
  • Pages.169-189
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Substructural parameters and dynamic loading identification with limited observations

  • Xu, Bin (College of Civil Engineering, Hunan University) ;
  • He, Jia (College of Civil Engineering, Hunan University)
  • 투고 : 2014.01.10
  • 심사 : 2014.05.25
  • 발행 : 2015.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Convergence difficulty and available complete measurement information have been considered as two primary challenges for the identification of large-scale engineering structures. In this paper, a time domain substructural identification approach by combining a weighted adaptive iteration (WAI) algorithm and an extended Kalman filter method with a weighted global iteration (EFK-WGI) algorithm was proposed for simultaneous identification of physical parameters of concerned substructures and unknown external excitations applied on it with limited response measurements. In the proposed approach, according to the location of the unknown dynamic loadings and the partially available structural response measurements, part of structural parameters of the concerned substructure and the unknown loadings were first identified with the WAI approach. The remaining physical parameters of the concerned substructure were then determined by EFK-WGI basing on the previously identified loadings and substructural parameters. The efficiency and accuracy of the proposed approach was demonstrated via a 20-story shear building structure and 23 degrees of freedom (DOFs) planar truss model with unknown external excitation and limited observations. Results show that the proposed approach is capable of satisfactorily identifying both the substructural parameters and unknown loading within limited iterations when both the excitation and dynamic response are partially unknown.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China (NSFC)

참고문헌

  1. Carden, E.P. and Fanning, P. (2004), "Vibration based condition monitoring: a review", Struct. Health Monit., 3(4), 355-377. https://doi.org/10.1177/1475921704047500
  2. Chang, P.C., Flatau, A. and Liu, S.C. (2003), "Review paper: health monitoring of civil infrastructure", Struct. Health Monit., 2(3), 257-267. https://doi.org/10.1177/1475921703036169
  3. Fan, W. and Qiao, P.Z. (2011), "Vibration-based damage identification methods: A review and comparative study", Struct. Health Monit., 10(1), 83-111. https://doi.org/10.1177/1475921710365419
  4. Koh, C.G., See, L.M. and Balendra, T. (1991), "Estimation of structural parameters in time domain: a substructure approach", Earthq. Eng. Struct. D., 20(8), 787-801. https://doi.org/10.1002/eqe.4290200806
  5. Koh, C.G., Hong, B. and Liaw, C.Y. (2003), "Substructural and progressive structural identification methods", Eng. Struct., 25(12), 1551-1563. https://doi.org/10.1016/S0141-0296(03)00122-6
  6. Law, S.S. and Yong, D. (2011), "Substructure methods for structural condition assessment", J. Sound Vib., 330(15), 3606-3619. https://doi.org/10.1016/j.jsv.2011.03.003
  7. Lei, Y., Wang, H.F. and Shen, W.A. (2012a), "Update the finite element model of Canton Tower based on direct matrix updating with incomplete modal data", Smart Struct. Syst., 10(4-5), 471-483. https://doi.org/10.12989/sss.2012.10.4_5.471
  8. Lei, Y., Jiang, Y.Q. and Xu, Z.Q. (2012b), "Structural damage detection with limited input and output measurement signals", Mech. Syst. Signal Pr., 28, 229-243. https://doi.org/10.1016/j.ymssp.2011.07.026
  9. Li J., Law, S.S. and Ding, Y. (2012), "Substructure damage identification based on response reconstruction in frequency domain and model updating", Eng. Struct., 41, 270-284. https://doi.org/10.1016/j.engstruct.2012.03.035
  10. Li, J. and Law, S.S. (2012), "Substructural Damage Detection With Incomplete Information of the Structure", J. Appl. Mech.- ASCE, 79(4), DOI: 10.1115/1.4005552.
  11. Lu, Z.R., Huang, M. and Liu, J.K. (2011), "State-space formulation for simultaneous identification of both damage and input force from response sensitivity", Smart Struct. Syst., 8(2), 157-172. https://doi.org/10.12989/sss.2011.8.2.157
  12. Park, J.H., Kim, J.T., Hong, D.S., Mascarenas, D. and Lynch, P.J. (2010), "Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements", Smart Struct. Syst., 6(5-6), 711-730. https://doi.org/10.12989/sss.2010.6.5_6.711
  13. Park, J.H., Kim, J.T. and Yi, J.H. (2011), "Output-only modal identification approach for time-unsynchronized signals from decentralized wireless sensor network for linear structural systems", Smart Struct. Syst., 7(1), 59-82. https://doi.org/10.12989/sss.2011.7.1.059
  14. Rahmatalla, S., Eun, H.C. and Lee, E.T. (2012), "Damage detection from the variation of parameter matrices estimated by incomplete FRF data", Smart Struct. Syst., 9(1), 55-70. https://doi.org/10.12989/sss.2012.9.1.055
  15. Tee, K.F., Koh, C.G. and Quek, S.T. (2005), "Substructural first- and second-order model identification for structural damage assessment", Earthq. Eng. Struct. D., 34(15), 1755-1775. https://doi.org/10.1002/eqe.500
  16. Tee, K.F., Koh, C.G. and Quek, S.T. (2009), "Numerical and Experimental Studies of a Substructural Identification Strategy", Struct. Health Monit., 8(5), 397-410. https://doi.org/10.1177/1475921709102089
  17. Trinh, T.N. and Koh, C.G. (2012), "An improved substructural identification strategy for large structural systems", Struct. Control Health Monit., 19(8), 686-700. https://doi.org/10.1002/stc.463
  18. Xu, B. (2005), "Time domain substructural post-earthquake damage diagnosis methodology with neural networks", Lecture Note in Computer Science, 3611, 520-529.
  19. Xu, B., He, J., Rovekamp, R. and Dyke, S.J. (2012), "Structural parameters and dynamic loading identification from incomplete measurements: Approach and validation", Mech. Syst. Signal Pr., 28, 244-257. https://doi.org/10.1016/j.ymssp.2011.07.008
  20. Yi, T.H., Li, H.N. and Gu, M. (2011), "Characterization and extraction of global positioning system multipath signals using improved particle filtering algorithm", Meas. Sci. Technol., 22(7), Article ID 075101: 1-11.
  21. Yi, T.H., Li, H.N. and Gu, M. (2013a), "Wavelet based multi-step filtering method for bridge health monitoring using GPS and accelerometer", Smart Struct. Syst., 2013, 11(4), 331-348. https://doi.org/10.12989/sss.2013.11.4.331
  22. Yi, T.H., Li, H.N. and Sun H.M. (2013b), "Multi-stage structural damage diagnosis method based on energy-damage theory", Smart Struct. Syst., 12(3-4), 345-361. https://doi.org/10.12989/sss.2013.12.3_4.345
  23. Zhang, D.Y. and Johnson, E.A. (2012), "Substructure identification for shear structures: cross-power spectral density method", Smart Mater. Struct., 21(5), 1-12.
  24. Zhang, D.Y. and Johnson, E.A. (2013), "Substructure identification for shear structures I: Substructure identification method", Struct. Control Health Monit., 20(5), 804-820. https://doi.org/10.1002/stc.1497

피인용 문헌

  1. Identification of model-free structural nonlinear restoring forces using partial measurements of structural responses vol.20, pp.1, 2017, https://doi.org/10.1177/1369433216646006
  2. Data fusion based improved Kalman filter with unknown inputs and without collocated acceleration measurements vol.18, pp.3, 2016, https://doi.org/10.12989/sss.2016.18.3.375
  3. A wavelet transform and substructure algorithm for tracking the abrupt stiffness degradation of shear structure pp.2048-4011, 2018, https://doi.org/10.1177/1369433218807690
  4. Structural nonlinearity and mass identification with a nonparametric model using limited acceleration measurements pp.2048-4011, 2018, https://doi.org/10.1177/1369433218792083
  5. Output-Only Parameters Identification of Earthquake-Excited Building Structures with Least Squares and Input Modification Process vol.9, pp.4, 2019, https://doi.org/10.3390/app9040696
  6. A new conjugate gradient algorithm for solving dynamic load identification vol.64, pp.2, 2015, https://doi.org/10.12989/sem.2017.64.2.271
  7. Uncertainty quantification for structural health monitoring applications vol.22, pp.4, 2015, https://doi.org/10.12989/sss.2018.22.4.399
  8. Identification of Structural Parameters and Unknown Inputs Based on Revised Observation Equation: Approach and Validation vol.19, pp.12, 2015, https://doi.org/10.1142/s0219455419501566
  9. A two-stage Kalman filter for the identification of structural parameters with unknown loads vol.26, pp.6, 2020, https://doi.org/10.12989/sss.2020.26.6.693