DOI QR코드

DOI QR Code

Instrumentation on structural health monitoring systems to real world structures

  • Teng, Jun (School of Civil Engineering, Fujian University of technology) ;
  • Lu, Wei (Department of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School) ;
  • Wen, Runfa (Department of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School) ;
  • Zhang, Ting (Department of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School)
  • 투고 : 2014.01.12
  • 심사 : 2014.05.27
  • 발행 : 2015.01.25

초록

Instrumentation on structural health monitoring system imposes critical issues for applying the structural monitoring system to real world structures, for which not only on the configuration and geometry, but also aesthetics on the system to be monitored should be considered. To illustrate this point, two real world structural health monitoring systems, the structural health monitoring system of Shenzhen Vanke Center and the structural health monitoring system of Shenzhen Bay Stadium in China, are presented in the paper. The instrumentation on structural health monitoring systems of real world structures is addressed by providing the description of the structure, the purpose of the structural health monitoring system implementation, as well as details of the system integration including the installations on the sensors and acquisition equipment and so on. In addition, an intelligent algorithm on stress identification using measurements from multi-region is presented in the paper. The stress identification method is deployed using the fuzzy pattern recognition and Dempster-Shafer evidence theory, where the measurements of limited strain sensors arranged on structure are the input data of the method. As results, at the critical parts of the structure, the stress distribution evaluated from the measurements has shown close correlation to the numerical simulation results on the steel roof of the Beijing National Aquatics Center in China. The research work in this paper can provide a reference for the design and implementation of both real world structural health monitoring systems and intelligent algorithm to identify stress distribution effectively.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation of China

참고문헌

  1. Abazarsa, F., Ghahari, S.F., Nateghi, F. and Taciroglu, E. (2013), "Response-only modal identification of structures using limited sensors", Struct. Control Health Monit., 20(6), 987-1006. https://doi.org/10.1002/stc.1513
  2. Barr, P.J., Woodward, C.B., Najera, B. and Amin, M.N. (2006), "Long-term structural health monitoring of the San Ysidro Bridge" , J. Perform. Constr. Fac.,20(1), 14-20. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:1(14)
  3. Brownjohn, J.M. (2007), "Structural health monitoring of civil infrastructure", Philos. T, Roy. Soc, A, , 365(1851), 589-622. https://doi.org/10.1098/rsta.2006.1925
  4. Catbas, F.N., Susoy, M. and Frangopol, D.M. (2008), "Structural health monitoring and reliability estimation: long span truss bridge application with environmental monitoring data", Eng. Struct,, 30(9), 2347-2359. https://doi.org/10.1016/j.engstruct.2008.01.013
  5. Chan, T.H.T, Yu, L., Tam, H.Y., Ni, Y.Q., Liu, S.Y., Chung, W.H. and Cheng, L.K. (2006), "Fiber bragg grating sensors for structural health monitoring of Tsing Ma Bridge: background and experimental observation", Eng. Struct., 28(5), 648-659. https://doi.org/10.1016/j.engstruct.2005.09.018
  6. Chang, P.C., Flatau, A. and Liu, S.C. (2003), "Review paper: health monitoring of civil infrastructure", Struct. Health Monit., 2(3), 257-267. https://doi.org/10.1177/1475921703036169
  7. Chen, B. and Xu, Y.L. (2008), "Integrated vibration control and health monitoring of building structures using semi-active friction dampers: part II-numerical investigation", Eng. Struct,, 30(3),573-587. https://doi.org/10.1016/j.engstruct.2007.03.006
  8. Farhey, D.N.(2005), "Bridge instrumentation and monitoring for structural diagnostics", Struct. Health Monit., 4(4), 301-318. https://doi.org/10.1177/1475921705057966
  9. Farrar, C.R, Sohn, H., Fugate, M.L. and Czarnecki, J.J. (2001), "Integrated structural health monitoring, advanced nondestructive evaluation for structural and biological health monitoring", Proceedings of SPIE, Vol.4335.
  10. Farrar, C.R. and Worden, K. (2007), "An introduction to structural health monitoring", Philos. T. Roy. Soc., 365(1851), 303-315. https://doi.org/10.1098/rsta.2006.1928
  11. Farhey, D.N.(2006), "Instrumentation system performance for long-term bridge health monitoring", Struct. Health Monit., 5(2), 143-153. https://doi.org/10.1177/1475921706057986
  12. Fu, X.Y., Gu, L., Yang, X.Q., Yu, W.H. and Chen, X.C. (2007), "Beijing olympic national swimming centre: structural design", Struct. Engineer, 85(22),27-33.
  13. Liu, H., Qu, W.L. and Wang, J.W. (2008), "Intelligent monitoring technique for working status of Shenzhen citizen center roof truss structure under wind load". Adv. Mater. Res., 33-37(part 2), 1141-1148. https://doi.org/10.4028/www.scientific.net/AMR.33-37.1141
  14. Liu, M., Frangopol, D.M. and Kim, S.Y. (2009), "Bridge system performance assessment from structural health monitoring: acase study", J. Struct. Eng. - ASCE, 35(6), 733-742.
  15. Ng, G.W. (2003), Intelligent systems: fusion, tracking and control, Research studies press ltd.
  16. Park, G., Rosing, T., Todd, M.D., Farrar, C.R. and Hodgkiss, W. (2008), "Energy harvesting for structural health monitoring sensor networks", J. Infrastruct. Syst., 14(1),64-79. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(64)
  17. Sinha, S.K. (2004), "A multi-sensory approach to structural health monitoring of buried sewer pipelines infrastructures system", Pipeline Eng. Constr., 1-12.
  18. Teng, J. and Lu, W. (2010), "Efficient structural health monitoring by limited strain measurements", Proceedings of the10th Earth and Space Conference, Honolulu.
  19. Teng, J., Zhang, T. and Lu, W. (2012), "Structural stress identification using fuzzy pattern recognition and information fusion technique", J. Civil Eng. Architecture, 6(4), 479-488.
  20. Wang, J., Qu W.L., Zhen, J. and Liu, H. (2007), "Fuzzy pattern identification and experimental verification of stress field of space steel structure", Proceedings of the 7th International Conference on Health Monitoring of Structure, Material and Environment, Nanjing.
  21. Zhu, D.P., Yi, X.H., Wang, Y., Guo, J.J. and Lee, K.M. (2010), "Mobile sensor networks: a new approach for structural health monitoring", Proceedings of the 10th Structures Congress, Orlando.

피인용 문헌

  1. Structural-Performance Tracking to Multitype Members of Shenzhen Vanke Center in Construction Phase vol.30, pp.2, 2017, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000702
  2. Absolute stress measurement of structural steel members with ultrasonic shear-wave spectral analysis method 2017, https://doi.org/10.1177/1475921717746952
  3. Structural Monitoring Techniques for the Largest Excavation Section Subsea Tunnel: Xiamen Xiang’an Subsea Tunnel vol.30, pp.2, 2017, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000594
  4. Structural displacement and strain monitoring based on the edge detection operator vol.20, pp.2, 2017, https://doi.org/10.1177/1369433216660220
  5. Force monitoring of steel cables using vision-based sensing technology: methodology and experimental verification vol.18, pp.3, 2016, https://doi.org/10.12989/sss.2016.18.3.585
  6. Structural damage alarming and localization of cable-supported bridges using multi-novelty indices: a feasibility study vol.54, pp.2, 2015, https://doi.org/10.12989/sem.2015.54.2.337
  7. Cross-correlation-based algorithm for absolute stress evaluation in steel members using the longitudinal critically refracted wave vol.14, pp.10, 2018, https://doi.org/10.1177/1550147718803312
  8. Data fusion approaches for structural health monitoring and system identification: Past, present, and future pp.1741-3168, 2018, https://doi.org/10.1177/1475921718798769
  9. Influence of Uniaxial Stress on the Shear-Wave Spectrum Propagating in Steel Members vol.19, pp.3, 2019, https://doi.org/10.3390/s19030492
  10. Stress variation analysis based on temperature measurements at Zhuhai Opera House vol.5, pp.1, 2015, https://doi.org/10.12989/smm.2018.5.1.001
  11. Localisation of embedded water drop in glass composite using THz spectroscopy vol.21, pp.6, 2018, https://doi.org/10.12989/sss.2018.21.6.751
  12. A review on sensors and systems in structural health monitoring: current issues and challenges vol.22, pp.5, 2018, https://doi.org/10.12989/sss.2018.22.5.509
  13. Construction of Wireless Underground Footwork Mobile Training and Monitoring Sensor Network in Venues of Major Sports Events vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/8423297