DOI QR코드

DOI QR Code

An exploratory study of stress wave communication in concrete structures

  • Ji, Qing (Department of Electrical Engineering, University of Houston) ;
  • Ho, Michael (Department of Mechanical Engineering, University of Houston) ;
  • Zheng, Rong (Department of Computing and Software, McMaster University) ;
  • Ding, Zhi (Department of Electrical Engineering, University of California) ;
  • Song, Gangbing (Department of Electrical Engineering, University of Houston)
  • 투고 : 2014.01.09
  • 심사 : 2014.05.25
  • 발행 : 2015.01.25

초록

Large concrete structures are prone to cracks and damages over time from human usage, weathers, and other environmental attacks such as flood, earthquakes, and hurricanes. The health of the concrete structures should be monitored regularly to ensure safety. A reliable method of real time communications can facilitate more frequent structural health monitoring (SHM) updates from hard to reach positions, enabling crack detections of embedded concrete structures as they occur to avoid catastrophic failures. By implementing an unconventional mode of communication that utilizes guided stress waves traveling along the concrete structure itself, we may be able to free structural health monitoring from costly (re-)installation of communication wires. In stress-wave communications, piezoelectric transducers can act as actuators and sensors to send and receive modulated signals carrying concrete status information. The new generation of lead zirconate titanate (PZT) based smart aggregates cause multipath propagation in the homogeneous concrete channel, which presents both an opportunity and a challenge for multiple sensors communication. We propose a time reversal based pulse position modulation (TR-PPM) communication for stress wave communication within the concrete structure to combat multipath channel dispersion. Experimental results demonstrate successful transmission and recovery of TR-PPM using stress waves. Compared with PPM, we can achieve higher data rate and longer link distance via TR-PPM. Furthermore, TR-PPM remains effective under low signal-to-noise (SNR) ratio. This work also lays the foundation for implementing multiple-input multiple-output (MIMO) stress wave communication networks in concrete channels.

키워드

과제정보

연구 과제 주관 기관 : NSF

참고문헌

  1. Bocchini, P., Marzani, A. and Viola, E. (2011), "Graphical user interface for guided acoustic waves", J. Comput. Civil Eng., 25(3), 202-210. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000081
  2. Edelmann, G., Song, H., Kim S., Hodgkiss, W., Kuperman, W. and Akal, T. (2005), "Underwater acoustic communication using time reversal", IEEE J. Ocean. Eng., 30(4), 852-864. https://doi.org/10.1109/JOE.2005.862137
  3. Graham, D., Neasham, J. and Sharif, B. (2009). "High bit rate communication through metallic structures using electromagnetic acoustic transducers", OCEANS 2009-EUROPE, 1-6.
  4. Gu, H., Song G., Dhonde H., Mo Y.L. and Yan S. (2006), "Concrete early-age strength monitoring using embedded piezoelectric transducers", Smart Mater. Struct., 15(6), 1837-1845. https://doi.org/10.1088/0964-1726/15/6/038
  5. Hoult, N.A., Fidler, P.R.A. and Middleton, C.R. (2009), "Wireless structural health monitoring of bridges: current challenges and future innovations", Proceedings of the 7th AustRoads Bridge Conference.
  6. Hou, S., Zhang, H.B. and Ou, J.P. (2012), "A PZT-based smart aggregate for compressive seismic stress monitoring", Smart Mater. Struct., 21(10), 105035, 1-9. https://doi.org/10.1088/0964-1726/21/10/105035
  7. Johnson, C.C. (1972), A seismic communications investigation employing a piezoelectric transducer.
  8. Jin, Y., Zhao, D. and Ying, Y. (2011), "Time reversal data communications on pipes using guided elastic waves - Part I: Basic principles", Proceedings of the SPIE: Smart Structures/NDE Conference.
  9. Jin, Y., Ying, Y. and Zhao, D. (2011), "Time reversal data communications on pipes using guided elastic waves - Part II: Experimental studies", Proceedings of the SPIE: Smart Structures/NDE, 1-11.
  10. Jin, Y., Jiang, Y. and Moura, J.M.F. (2007), "Multiple antenna time reversal transmission in ultra-wideband communications", Proceedings of the IEEE Globe Communication Conference.
  11. Kokossalakis, G. (2006), Acoustic data communication system for in-pipe wireless sensor network, PhD Dissertation, Massachusetts Institute of Technology, Cambridge, MA.
  12. Kailaswar, S., Zheng, R., Kovitz, J., Phung, Q., Wang, H., Ding, Z. and Song, G. (2012), "ConcreteCom: A New Communication Paradigm for Building Structural Health Monitoring", Proceedings of the 4th ACM Workshop on Embedded Sensing Systems for Energy-Efficiency in Buildings.
  13. Li, P., Gu, H., Song, G., Zheng, R. and Mo, Y.L. (2010), "Concrete structural health monitoring using piezoceramic-based wireless sensor networks", Smart Struct. Syst., 6(5-6), 731-748. https://doi.org/10.12989/sss.2010.6.5_6.731
  14. Li, P., Olmi, C. and Song, G. (2010), "Energy efficient wireless sensor network for structural health monitoring using distributed embedded piezoelectric transducers", Proceedings of the SPIE: Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics.
  15. Murphy, T. (2006), Ultrasonic digital communication system for a steel wall multipath channel: methods and results, Master's Dissertation, Rensselaer Polytechnic Institute.
  16. Primerano, R.A. (2010), High Bit-rate Digital Communication through Metal Channels, Ph.D. Dissertation, Drexel University, Philadelphia.
  17. Ramirez-Iniguez, R., Idrus, S.M. and Sun, Z. (2008), Optical Wireless Communications: IR for Wireless Connectivity, Boca Raton: CRC Press, USA.
  18. Song, G., Gu, H. and Mo, Y.L. (2008), "Smart aggregates: multi-functional sensors for concrete structures-a tutorial and a review", Smart Mater. Struct., 17(3), 1-17.
  19. Sharony, J. (2006), Introduction to Wireless MIMO-Theory and Applications, CEWIT-Center of Excellence in Wireless and Informational Technology, Stony Brook University, IEEE LI.
  20. Ying, Y., Soibelman, L., Garrett, J., Jin, Y., Moura, J., Oppenheim, I., O'Donoughue, N. and Harley, J. (2010). "Time reversal detection in pipes", Proceedings of the SPIE: Smart Structures/NDT, 7647, 76473S-1-12.

피인용 문헌

  1. Identification of the impact direction using the beat signals detected by piezoceramic sensors vol.26, pp.8, 2017, https://doi.org/10.1088/1361-665X/aa7254
  2. Health monitoring of cuplok scaffold joint connection using piezoceramic transducers and time reversal method vol.25, pp.3, 2016, https://doi.org/10.1088/0964-1726/25/3/035010
  3. An imaging method for the covered damage region of strand wire based on dual time reversal using piezoceramic transducers vol.26, pp.10, 2017, https://doi.org/10.1088/1361-665X/aa78d3
  4. A Smart Washer for Bolt Looseness Monitoring Based on Piezoelectric Active Sensing Method vol.6, pp.12, 2016, https://doi.org/10.3390/app6110320
  5. Crack detection in plastic pipe using piezoelectric transducers based on nonlinear ultrasonic modulation vol.26, pp.10, 2017, https://doi.org/10.1088/1361-665X/aa6293
  6. Monitoring Concrete Deterioration Due to Reinforcement Corrosion by Integrating Acoustic Emission and FBG Strain Measurements vol.17, pp.3, 2017, https://doi.org/10.3390/s17030657
  7. Underwater pipeline impact localization using piezoceramic transducers vol.26, pp.10, 2017, https://doi.org/10.1088/1361-665X/aa80c9
  8. Load Monitoring of the Pin-Connected Structure Using Time Reversal Technique and Piezoceramic Transducers—A Feasibility Study vol.16, pp.22, 2016, https://doi.org/10.1109/JSEN.2016.2600760
  9. Development of a Novel Guided Wave Generation System Using a Giant Magnetostrictive Actuator for Nondestructive Evaluation vol.18, pp.3, 2018, https://doi.org/10.3390/s18030779
  10. Prestress Monitoring of a Steel Strand in an Anchorage Connection Using Piezoceramic Transducers and Time Reversal Method vol.18, pp.11, 2018, https://doi.org/10.3390/s18114018
  11. Self-Sensing CFRP Fabric for Structural Strengthening and Damage Detection of Reinforced Concrete Structures vol.18, pp.12, 2018, https://doi.org/10.3390/s18124137
  12. Loosening Monitoring of the Threaded Pipe Connection Using Time Reversal Technique and Piezoceramic Transducers vol.18, pp.7, 2018, https://doi.org/10.3390/s18072280
  13. Debonding Detection in Hidden Frame Supported Glass Curtain Walls Using the Nonlinear Ultrasonic Modulation Method with Piezoceramic Transducers vol.18, pp.7, 2018, https://doi.org/10.3390/s18072094
  14. A Novel Waveform Optimization Scheme for Piezoelectric Sensors Wire-Free Charging in the Tightly Insulated Environment vol.5, pp.3, 2018, https://doi.org/10.1109/JIOT.2018.2817601
  15. Interfacial Adhesion–Strength Detection of Structural Silicone Sealant for Hidden Frame–Supported Glass Curtain Wall Based on Nonlinear Ultrasonic Lamb Wave vol.31, pp.5, 2018, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000870
  16. Investigation of Bonding Behavior of FRP and Steel Bars in Self-Compacting Concrete Structures Using Acoustic Emission Method vol.19, pp.1, 2019, https://doi.org/10.3390/s19010159
  17. Damage Analyses of Replaceable Links in Eccentrically Braced Frame (EBF) Subject to Cyclic Loading vol.9, pp.2, 2019, https://doi.org/10.3390/app9020332
  18. Design of a New Stress Wave-Based Pulse Position Modulation (PPM) Communication System with Piezoceramic Transducers vol.19, pp.3, 2019, https://doi.org/10.3390/s19030558
  19. Guided wave analysis of air-coupled impact-echo in concrete slab vol.20, pp.3, 2017, https://doi.org/10.12989/cac.2017.20.3.257
  20. Bond-Slip Monitoring of Concrete Structures Using Smart Sensors—A Review vol.19, pp.5, 2015, https://doi.org/10.3390/s19051231
  21. Characterization of Ultrasonic Energy Diffusion in a Steel Alloy Sample with Tensile Force Using PZT Transducers vol.19, pp.9, 2015, https://doi.org/10.3390/s19092185
  22. Inspection and monitoring systems subsea pipelines: A review paper vol.19, pp.2, 2015, https://doi.org/10.1177/1475921719837718
  23. Experimental Research on Shear Failure Monitoring of Composite Rocks Using Piezoelectric Active Sensing Approach vol.20, pp.5, 2015, https://doi.org/10.3390/s20051376
  24. EMI based multi-bolt looseness detection using series/parallel multi-sensing technique vol.25, pp.4, 2015, https://doi.org/10.12989/sss.2020.25.4.423
  25. Electro-mechanical impedance based strength monitoring technique for hydrating blended cements vol.25, pp.6, 2020, https://doi.org/10.12989/sss.2020.25.6.751
  26. Piezoelectric Electro-Mechanical Impedance (EMI) Based Structural Crack Monitoring vol.10, pp.13, 2015, https://doi.org/10.3390/app10134648
  27. Detecting of the Crack and Leakage in the Joint of Precast Concrete Segmental Bridge Using Piezoceramic Based Smart Aggregate vol.20, pp.18, 2015, https://doi.org/10.3390/s20185398
  28. Estimate buried metal pipe length using PZT detected stress wave reflection vol.32, pp.8, 2021, https://doi.org/10.1177/1045389x20966059