DOI QR코드

DOI QR Code

Structural health rating (SHR)-oriented 3D multi-scale finite element modeling and analysis of Stonecutters Bridge

  • Li, X.F. (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University) ;
  • Ni, Y.Q. (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University) ;
  • Wong, K.Y. (Formerly Bridges and Structures Division, Highways Department, The Hong Kong Special Administrative Region) ;
  • Chan, K.W.Y. (Bridges and Structures Division, Highways Department, The Hong Kong Special Administrative Region)
  • 투고 : 2014.02.10
  • 심사 : 2014.05.27
  • 발행 : 2015.01.25

초록

The Stonecutters Bridge (SCB) in Hong Kong is the third-longest cable-stayed bridge in the world with a main span stretching 1,018 m between two 298 m high single-leg tapering composite towers. A Wind and Structural Health Monitoring System (WASHMS) is being implemented on SCB by the Highways Department of The Hong Kong SAR Government, and the SCB-WASHMS is composed of more than 1,300 sensors in 15 types. In order to establish a linkage between structural health monitoring and maintenance management, a Structural Health Rating System (SHRS) with relevant rating tools and indices is devised. On the basis of a 3D space frame finite element model (FEM) of SCB and model updating, this paper presents the development of an SHR-oriented 3D multi-scale FEM for the purpose of load-resistance analysis and damage evaluation in structural element level, including modeling, refinement and validation of the multi-scale FEM. The refined 3D structural segments at deck and towers are established in critical segment positions corresponding to maximum cable forces. The components in the critical segment region are modeled as a full 3D FEM and fitted into the 3D space frame FEM. The boundary conditions between beam and shell elements are performed conforming to equivalent stiffness, effective mass and compatibility of deformation. The 3D multi-scale FEM is verified by the in-situ measured dynamic characteristics and static response. A good agreement between the FEM and measurement results indicates that the 3D multi-scale FEM is precise and efficient for WASHMS and SHRS of SCB. In addition, stress distribution and concentration of the critical segments in the 3D multi-scale FEM under temperature loads, static wind loads and equivalent seismic loads are investigated. Stress concentration elements under equivalent seismic loads exist in the anchor zone in steel/concrete beam and the anchor plate edge in steel anchor box of the towers.

키워드

과제정보

연구 과제 주관 기관 : Council of the Hong Kong Special Administrative Region

참고문헌

  1. Brownjohn, J.M.W. (2007), "Structural health monitoring of civil infrastructure", Philos. T. R. Soc. A, 365(1851), 589-622. https://doi.org/10.1098/rsta.2006.1925
  2. Brownjohn, J.M.W., Lee, J. and Cheong, B. (1999), "Dynamic performance of a curved cable-stayed bridge", Eng. Struct., 21(11), 1015-1027. https://doi.org/10.1016/S0141-0296(98)00046-7
  3. Brownjohn, J.M.W. and Xia, P.Q. (2000), "Dynamic assessment of curved cable-stayed bridge by model updating", J. Struct. Eng. - ASCE, 126(2), 252-260. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:2(252)
  4. Caicedo, J.M., Dyke, S.J., Moon, S.J., Bergman, L.A., Turan, G. and Hague, S. (2003), "Phase II benchmark control problem for seismic response of cable-stayed bridges", J. Struct. Control, 10(3-4), 137-168. https://doi.org/10.1002/stc.23
  5. Chang, C.C., Chang, T.Y.P. and Zhang, Q.W. (2001), "Ambient vibration of long-span cable-stayed bridge", J. Bridge Eng. - ASCE, 6(1), 46-53. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:1(46)
  6. Cunha, A., Caetano, E. and Delgado, R. (2001), "Dynamic tests on large cable-stayed bridge", J. Bridge Eng .- ASCE, 6(1),54-62. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:1(54)
  7. Daniell, W.E. and Macdonald, J.H.G. (2005), "Improved finite element modelling of a cable-stayed bridge through systematic manual tuning", Eng. Struct., 29(3), 358-371. https://doi.org/10.1016/j.engstruct.2006.05.003
  8. Ding, Y.L., Li, A.Q., Du, D.S. and Liu, T. (2010), "Multi-scale damage analysis for a steel box girder of a long-span cable-stayed bridge", Struct. Infrastruct. E., 6(6), 725-739. https://doi.org/10.1080/15732470802187680
  9. Freire, A.M.S., Negrao, J.H.O. and Lopes, A.V. (2006), "Geometrical nonlinearities on the static analysis of highly flexible steel cable-stayed bridges", Comput. Struct., 84(31-32), 2128-2140. https://doi.org/10.1016/j.compstruc.2006.08.047
  10. Gentile, C. and Gennari-Santori, A. (2006), "Dynamic testing and modeling of a 30-years' old cable-stayed bridge", Struct. Eng. Int., 16(1), 39-43. https://doi.org/10.2749/101686606777962792
  11. Habel, W.R. (2009), "Structural health monitoring research in Europe: trends and applications", in: Structural Health Monitoring of Civil Infrastructure Systems, (Eds., V.M., Karbhari and F., Ansari), Wood head Publishing, Cambridge, UK.
  12. Hassan, M.M. (2013), "Optimization of stayed cables in cable-stayed bridges using finite element, genetic algorithm, and B-spline combined technique", Eng. Struct., 49, 643-654. https://doi.org/10.1016/j.engstruct.2012.11.036
  13. Hua, X.G., Ni, Y.Q., Chen, Z.Q. and Ko, J.M. (2009), "Structural damage detection of cable-stayed bridges using changes in cable forces and model updating", J. Struct. Eng. - ASCE, 135(9), 1093-1106. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:9(1093)
  14. Jaishi, B. and Ren, W.X. (2005), "Structural finite element model updating using ambient vibration test results", J. Struct. Eng. - ASCE, 131(4), 617-628. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(617)
  15. Kim, J., Ho, D., Nguyen, K., Hong, D., Shin, S., Yun, C. and Shinozuka, M. (2013), "System identification of a cable-stayed bridge using vibration responses measured by a wireless sensor network", Smart Struct. Syst., 11(5), 533-553. https://doi.org/10.12989/sss.2013.11.5.533
  16. Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725. https://doi.org/10.1016/j.engstruct.2005.02.021
  17. Ko, J.M., Ni, Y.Q. and Chan, T.H.T. (1999), "Dynamic monitoring of structural health in cable-supported bridges", Smart Structures and Materials 1999: Smart Systems for Bridges, Structures, and Highways, (Ed., Liu , S.C.), SPIE.
  18. Ko, J.M., Sun, Z.G. and Ni, Y.Q. (2002), "Multi-stage identification scheme for detecting damage in cable-stayed Kap Shui Mun Bridge", Eng. Struct., 24(7), 857-868. https://doi.org/10.1016/S0141-0296(02)00024-X
  19. Li, Z.X., Zhou, T.Q., Chan, T.H.T. and Yu, Y. (2007), "Multi-scale numerical analysis on dynamic response and local damage in long-span bridges", Eng. Struct., 29(7), 1507-1524. https://doi.org/10.1016/j.engstruct.2006.08.004
  20. Mufti, A.A. (2002), "Structural health monitoring of innovative Canadian civil engineering structures", Struct. Health Monit., 1(1), 89-103. https://doi.org/10.1177/147592170200100106
  21. Ni, Y.Q. and Wong, K.Y. (2012), "Integrating bridge structural health monitoring and condition-based maintenance management", Proceedings of the 4th International Workshop on Civil Structural Health Monitoring, Berlin, Germany (CD-ROM).
  22. Ni, Y.Q., Wong, K.Y. and Xia, Y. (2011), "Health checks through landmark bridges to sky-high structures", Adv. Struct. Eng., 14(1), 103-119. https://doi.org/10.1260/1369-4332.14.1.103
  23. Ou, J. and Li, H. (2009), "Structural health monitoring research in China: trends and applications", Structural Health Monitoring of Civil Infrastructure Systems, (Eds., , V.M, Karbhari. and F., Ansari), Wood head Publishing, Cambridge, UK.
  24. Phares, B., Lu, P.,Wipf, T., Greimann, L. and Seo, J. (2013), "Field validation of a statistical-based bridge damage-detection algorithm", J. Bridge Eng. - ASCE, 18(11), 1227-1238. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000467
  25. Pines, D.J. and Aktan, A.E. (2002), "Status of structural health monitoring of long-span bridges in the United States", Prog. Struct. Eng. Mater., 4(4), 372-380. https://doi.org/10.1002/pse.129
  26. Ren, W.X., Peng, X.L. and Lin, Y.Q. (2005), "Experimental and analytical studies on dynamic characteristics of a large span cable-stayed bridge", Eng. Struct., 27(4), 535-548. https://doi.org/10.1016/j.engstruct.2004.11.013
  27. Seo, J., B. Phares, B., Lu, P., Wipf, T. and Dahlberg, J. (2013), "Bridge rating protocol using ambient trucks through structural health monitoring system", Eng. Struct., 46, 569-580. https://doi.org/10.1016/j.engstruct.2012.08.012
  28. Talebinejad, I., Fischer, C. and Ansari, F. (2011), "Numerical evaluation of vibration-based methods for damage assessment of cable-stayed bridges", Comput. -Aided Civil Infrastruct. Eng., 26(3), 239-251. https://doi.org/10.1111/j.1467-8667.2010.00684.x
  29. Wang, H., Li, A., Hu, R. and Li, J. (2010), "Accurate stress analysis on steel box girder of long span suspension bridges based on multi-scale submodeling method", Adv. Struct. Eng., 13(4), 727-740. https://doi.org/10.1260/1369-4332.13.4.727
  30. Wei, L., Cheng, H. and Li, J. (2012), "Modal analysis of a cable-stayed bridge", Procedia Eng., 31, 481-486. https://doi.org/10.1016/j.proeng.2012.01.1055
  31. Wilson, J.C. and Gravelle, W. (1991), "Modelling of a cable-stayed bridge for dynamic analysis", Earthq. Eng. Struct. D., 20(8), 707-721. https://doi.org/10.1002/eqe.4290200802
  32. Wong, K.Y. (2004), "Instrumentation and health monitoring of cable-supported bridges", Struct. Control Health Monit., 11(2), 91-124. https://doi.org/10.1002/stc.33
  33. Wong, K.Y. and Ni, Y.Q. (2009), "Modular architecture of structural health monitoring system for cable-supported bridges", Encyclopedia of Structural Health Monitoring, (Eds., C., Boller, F.K., Chang and Y. Fujino), John Wiley & Sons, Chichester, UK.
  34. Xia, Y.X., Ni., Y.Q. and Wong, K.Y. (2013), "Development of a 3D bridge rating system incorporating structural healthmonitoring data", Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Hong Kong (CD-ROM).
  35. Yun, C.B., Lee, J.J. and Koo, K.Y. (2011), "Smart structure technologies for civil infrastructures in Korea: recent research and applications", Struct. Infrastruct. E., 7(9), 673-688. https://doi.org/10.1080/15732470902720109
  36. Zhang, Q.W., Chang, T.Y.P. and Chang, C.C. (2001), "Finite element model updating for the Kap Shui Mun cable-stayed bridge", J. Bridge Eng. - ASCE, 6(4), 285-293. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:4(285)