조명전기설비학회논문지 (Journal of the Korean Institute of Illuminating and Electrical Installation Engineers)

  • 제29권1호
  • /
  • Pages.15-21
  • /
  • 2015
  • /
  • 1229-4691(pISSN)
  • /
  • 2287-5034(eISSN)
한국조명전기설비학회 (The Korean Institute of IIIuminating and Electrical Installation Engineers)
권호 표지
DOI QR코드

DOI QR Code

베이퍼챔퍼 제조기술을 적용한 LED 투광등기구의 열 특성 비교에 관한 연구

A Study on the Thermal Characteristics Comparison of the LED Floodlight Luminaire using Vapor Chamber Manufacturing Technology

  • Seo, Jin-Kook (Pukyong National University/SEKI Hi-TECH, INC.) ;
  • Yu, Young-Moon (LED-Marine Convergence Technology R&BD Center, Pukyong National University)
  • 투고 : 2014.10.20
  • 심사 : 2014.11.13
  • 발행 : 2015.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this paper is to analyze thermal characteristics of the heat sinks to maximize the thermal diffusivity for LED floodlight. The 2 kind of samples were prepared by vapor chamber manufacturing technology using the heat pipe principle. It was analyzed the maximum temperature reduction effect and the thermal diffusion from the heat source depending on the types of chambers with 3 kind of working fluids. As a result, it was confirmed that thermal conductivity 23% increased, GVC-R type than IVC-R type.

키워드

참고문헌

  1. Se-Il Lee, Seung-Min Lee and Dae-Hee Park, "Analysis of Thermal Properties in LED Package by Via hole of FR4 PCB", Trans. JIEIE, Vol. 24, No. 12, pp. 57-63, 2010.
  2. Hyeon-gyu An, "Prediction on Heat releasing Characteristics of Household LED Module and Heat sink Design", Master's Thesis in engineering, Kangwon National University Graduate School, 2011.
  3. Man-Seok Ko, Ju-Han Lee, Sang-June Oh, Hyen-Seok Cho and Tae-Beom Seo, "Cooling Performance of LED Head Lamp with Heat Sink and Cooling Fan", Trans. KSME, Vol. 33, No. 12, pp. 933-1034, 2009.
  4. Xiaobing Luo, Wei Xiong, Ting Cheng and Sheng Liu, "Design and Optimization of Horizontally-located Plate Fin Heat Sink for High Power LED Street Lamps", Electronic Components and Technology Conference, ECTC2009.59th, pp. 854-859, 2009.
  5. Frank P. Incropera, David P. DeWitt, "Fundamentals of heat and mass transfer", College of Engineering University of Notre Dame, 6th edition, pp. 1-11, 1996.
  6. Frank P. Incropera, David P. DeWitt, "Fundamentals of heat and mass transfer", College of Engineering University of Notre Dame, 6th edition, pp. 166-168, 1996.