DOI QR코드

DOI QR Code

Analytical study of the failure mode and pullout capacity of suction anchors in sand

  • Liu, Haixiao (State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University) ;
  • Peng, Jinsong (State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University) ;
  • Zhao, Yanbing (State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University)
  • 투고 : 2015.05.25
  • 심사 : 2015.11.27
  • 발행 : 2015.12.25

초록

Suction anchors are widely adopted and play an important role in mooring systems. However, how to reliably predict the failure mode and ultimate pullout capacity of the anchor in sand, especially by an easy-to-use theoretical method, is still a great challenge. Existing methods for predicting the inclined pullout capacity of suction anchors in sand are mainly based on experiments or finite element analysis. In the present work, based on a rational mechanical model for suction anchors and the failure mechanism of the anchor in the seabed, an analytical model is developed which can predict the failure mode and ultimate pullout capacity of suction anchors in sand under inclined loading. Detailed parametric analysis is performed to explore the effects of different parameters on the failure mode and ultimate pullout capacity of the anchor. To examine the present model, the results from experiments and finite element analysis are employed to compare with the theoretical predictions, and a general agreement is obtained. An analytical method that can evaluate the optimal position of the attachment point is also proposed in the present study. The present work demonstrates that the failure mode and pullout capacity of suction anchors in sand can be easily and reasonably predicted by the theoretical model, which might be a useful supplement to the experimental and numerical methods in analyzing the behavior of suction anchors.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Achmus, M., Akdag, C.T. and Thieken, K. (2013), "Load-bearing behavior of suction bucket foundations in sand", Appl. Ocean Res., 43, 157-165. https://doi.org/10.1016/j.apor.2013.09.001
  2. Allersma, H.G.B., Brinkgreve, R.B.J., Simon, T. and Kirstein, A.A. (2000), "Centrifuge and numerical modelling of horizontally loaded suction piles", Int. J. Offshore Polar., 10(3), 222-228.
  3. Ahmed, S.S. and Hawlader, B.C. (2014), "Finite element modeling of inclined load capacity of suction caisson in sand with Abaqus/Explicit", Proceedings of the 24th International Offshore and Polar Engineering Conference, Busan, Korea, June.
  4. Aubeny, C.P., Han, S.W. and Murff, J.D. (2003), "Inclined load capacity of suction caissons", Int. J. Numer. Anal. Method. Geomech., 27(14), 1235-1254. https://doi.org/10.1002/nag.319
  5. Bang, S. and Cho, Y. (2001), "Ultimate horizontal loading capacity of suction piles", Proceedings of the 11th International Offshore and Polar Engineering Conference, Stavanger, Norway, June.
  6. Bang, S., Jones, K., Kim, Y.S., Kim, K.O. and Cho, Y. (2006b), "Horizontal pullout capacity of embedded suction anchors in sand", Proceedings of the 25th International Conference on Offshore Mechanics and Arctic Engineering, Hamburg, Germany, June.
  7. Bang, S., Jones, K., Kim, Y.S., Kim, K.O. and Cho, Y. (2006c), "Vertical pullout capacity of embedded suction anchors in sand", Proceedings of the 16th International Offshore and Polar Engineering Conference, San Francisco, California, USA, May.
  8. Bang, S., Jones, K.D., Kim, K.O., Kim, Y.S. and Cho, Y. (2011), "Inclined loading capacity of suction piles in sand", Ocean Eng., 38(7), 915-924. https://doi.org/10.1016/j.oceaneng.2010.10.019
  9. Bang, S., Leahy, J.C., Cho, Y. and Kwon, O. (2006a), "Horizontal bearing capacity of suction piles in sand", J. T. Res. Board, Transportation Research Board of the National Academies, No. 1975, 21-27.
  10. Brinch Hansen, J. (1961), "The ultimate resistance of rigid piles against transversal forces", Danish Geotechnical Institute, 12, 5-9.
  11. Broms, B.B. (1964), "Lateral resistance of piles in cohesive soils", J. Soil Mech. Foundations Div., 90(2), 27-64.
  12. Clukey, E.C., Aubeny, C.P. and Murff, J.D. (2003), "Comparison of analytical and centrifuge model tests for suction caissons subjected to combined loads", Proceedings of the 22nd International Conference on Offshore Mechanics and Arctic Engineering, Cancun, Mexico, June.
  13. Deng, W. and Carter, J.P. (2000), "Inclined uplift capacity of suction caissons in sand", Proceedings of the 32nd Annual Offshore Technology Conference, Houston, Texas, USA, May.
  14. EI-sherbiny, R.M. (2005), Performance of suction caisson anchors in normally consolidated Clay, Ph.D. Dissertation, The University of Texas at Austin, Texas.
  15. Fleming, W.G.K., Weltman, A.J., Randolph, M.F. and Elson, W.K. (1992), Piling engineering. Surrey University Press, London.
  16. Gao, Y.F., Qiu, Y., Li, B., Li, D.Y., Sha, C.M. and Zheng, X. (2013), "Experimental studies on the anti-uplift behavior of the suction caissons in sand", Appl. Ocean Res., 43, 37-45. https://doi.org/10.1016/j.apor.2013.08.001
  17. Jones, K.D., Bang, S. and Cho, Y. (2007), "Pullout capacity of embedded suction anchors in sand", Ocean Eng., 34(16), 2107-2114. https://doi.org/10.1016/j.oceaneng.2007.05.007
  18. Jang, Y.S. and Kim, Y.S. (2013), "Centrifugal model behavior of laterally loaded suction pile in sand", KSCE J. Civil Eng., 17(5), 980-988. https://doi.org/10.1007/s12205-013-0011-z
  19. Jiao, B.T., Lu, X.B., Zhao, J., Wang, A.L., Shi, Z.M. and Zeng, X.H. (2009), "Experimental study on the bearing capacity of suction caissons in saturated sand", Proceedings of the 19th International Offshore and Polar Engineering Conference, Osaka, Japan, June.
  20. Keaveny, J.M., Hansen, S.B., Madshus, C. and Dyvik, R. (1994), "Horizontal capacity of large-scale model anchors", Proceedings of the 13th International Conference on Soil Mechanics and Foundation Engineering, New Delhi, India, January.
  21. Kim, K.O., Kim, Y.S., Cho, Y., Bang, S. and Jones, K. (2009), "Centrifuge model tests on suction piles in sand under inclined loading", Proceedings of the 19th International Offshore and Polar Engineering Conference, Osaka, Japan, June.
  22. Kulhawy, F.H., Trautmann, C.H., Beech, J.F., O'Rourke, T.D., Mcguire, W., Wood, W.A. and Capano, C. (1983), Transmission line structure foundations for uplift-compression loading, Report, Electric Power Research Institute, USA.
  23. Lehane, B.M., Elkhatib, S. and Terzaghi, S. (2014), "Extraction of suction caissons in sand", Geotechnique, 64(9), 735-739. https://doi.org/10.1680/geot.14.T.011
  24. Liu, H.X., Wang, C. and Zhao, Y.B. (2013), "Analytical study of the failure mode and pullout capacity of suction anchors in clay", Ocean Syst. Eng., 3(2), 79-95. https://doi.org/10.12989/ose.2013.3.2.079
  25. Liu, H.X., Zhang, W., Liu, C.L. and Hu, C. (2012), "Movement direction of drag anchors in seabed soils", Appl. Ocean Res., 34, 78-95. https://doi.org/10.1016/j.apor.2011.09.007
  26. Reese, L.C., Cox, W. R. and Koop, F.D. (1974), "Analysis of laterally loaded piles in sand", Proceedings of the 6th Offshore Technology Conference, Houston, May.
  27. Randolph, M.F. and House, A. (2002), "Analysis of suction caisson capacity in clay", Proceedings of the 34th Annual Offshore Technology Conference, Houston, USA, May.
  28. Thieken, K., Achmus, M. and Schroder, C. (2014), "On the behavior of suction buckets in sand under tensile loads", Comput. Geotech., 60, 88-100. https://doi.org/10.1016/j.compgeo.2014.04.004
  29. Tjelta, T.I. (2001), "Suction piles: their position and applications today", Proceedings of the 11th International Offshore Conference, Stavanger, Norway, June.
  30. Verruijt, A. (2006), Soil Mechanics, Merwehoofd, Papendrecht, Netherlands.
  31. Zeinoddini, M., Mousavi, A. and Hobbi, D. (2010), "Inclined load bearing capacity of suction caissons embedded in sands", Int. J. Earth Sci. Eng., 3(4), 563-571.
  32. Zhang, L.Y., Silva, F. and Grismala, R. (2005), "Ultimate lateral resistance to piles in cohesionless soils", J. Geotech. Geoenviron., 131(1), 78-83. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:1(78)
  33. Zhang, W. (2011), Penetration mechanism and kinematic behavior of drag anchors, Ph.D. Dissertation, Tianjin University, Tianjin, China.

피인용 문헌

  1. Analysis of pullout load capacity of suction caissons in clay by a three-dimensional displacement approach 2017, https://doi.org/10.1080/1064119X.2017.1326070
  2. Evaluation of pullout load capacity of suction caissons in sand using a three-dimensional displacement approach 2017, https://doi.org/10.1080/1064119X.2017.1295120
  3. Failure mode and pullout capacity of anchor piles in soils with cohesive and cohesionless properties vol.38, pp.9, 2015, https://doi.org/10.1080/1064119x.2019.1649332
  4. A Unified Model for Analyzing Comprehensive Behaviors of Deepwater Anchors vol.9, pp.8, 2015, https://doi.org/10.3390/jmse9080913