DOI QR코드

DOI QR Code

An Evaluation Technique of Surface Roughness of Corroded Reinforcing Bar-in-Coils

코일철근의 표면 거칠기 물리량 평가 기술

  • Roh, Young-Sook (School of Architecture, Seoul National University of Science and Technology) ;
  • Cho, Kang Woo (School of Architecture, Seoul National University of Science and Technology)
  • 노영숙 (서울과학기술대학교 건축학부) ;
  • 조강우 (서울과학기술대학교 건축학부)
  • Received : 2015.07.02
  • Accepted : 2015.10.08
  • Published : 2015.10.31

Abstract

This paper discusses the surface roughness of corroded reinforcement rebar-in-coil focusing on the quantitative measurement technique using 3D scanner. Reinforcement rebar-in-coil was stacked in site for 0 day, 3 days, 7 days, 14 days and 21 days. And rebar-in-coil was corroded 0.04%, 0.3367%, 0.6157%, 0.7898%, and 1.1965% respectively. Using 3-dimensional scanner, each surface profile of reinforcement rebar-in-coil was established, and surface roughness was measured. Through the tests and analyses of corroded rebar-in-coil, the increase of fractal dimension for each rebar-in-coil was measured as 0.0216, 0.0235, 0.028, 0.0319, and 0.0455 for different stacked periods. Therefore, surface assessment technique using fractal dimension showed similar results with the actual corrosion rate.

철근부식에 의해 발생된 녹은 철근 주변의 콘크리트에 팽창 압력을 유발하여 콘크리트의 균열, 피복콘크리트의 박리나 탈락, 철근의 단면적 감소 등 구조물의 내구성에 부정적인 영향을 끼친다. 본 논문에서는 코일철근을 대상으로 3차원 스캐너를 이용하여 철근이 부식됨에 따른 표면적을 측정하여 철근의 부식률과 표면 거칠기와의 관계를 프랙탈 이론을 이용하여 규명하였다. 코일 철근은 현장 적재일이 길수록 부식률이 증가하였으며, 부식률이 증가할수록 표면 거칠기는 거칠게 평가되었다. 프랙탈 차원의 증가량은 적재일 3일, 7일, 14일, 21일 경우 각각 0.0235, 0.0280, 0.0319, 그리고 0.0455로 나타났다. 이때의 부식률은 각각 0.3367%, 0.6127%, 0.7898%, 그리고 1.1965%로 나타나 프랙탈 차원을 이용한 부식된 코일철근의 표면 물리량 평가는 실제 부식률과 유사한 결과를 나타냈다.

Keywords

References

  1. Rebar in Coil Technical Specification, www.emiratessteel.com
  2. S-C. Chun, O-C. Choi, and J-M. Jin, "Experimental evaluation on Bond Strengths of Reinforcing Bar in Coils with Improved Machinability during Straightening Process", Journal of the Korea Concrete Institute, Vol.25, No.1, pp. 53-61, 2013. DOI: http://dx.doi.org/10.4334/JKCI.2013.25.1.053
  3. Totorri, S., Tsuchidaa, S., Miyagawa, T., Deterioration of Concrete Structures Based on the Test Results Concerning Crackgin and Rebar Corrosion, Concrete Research and technology, Vol.10, No.3, pp1-15, 1999. https://doi.org/10.3151/crt1990.10.3_1
  4. Al-Amoudi O. S., and Maslehuddin M., "The effect of Chloride and SUflate ions on Reinforcement Corrosion", Cement and Concrete Research, Vol. 23, pp. 139-146, 1993. DOI: http://dx.doi.org/10.1016/0008-8846(93)90144-X
  5. Imperatore S. and Rinaldi Z., "Mechanical behavior of corroded rebars and infuluence on the structural response of R/C elements", Concrete Repair, Rehabilitation and Retrofitting II, Alexander et al. (eds.), Taylor & Francis Group, London, pp. 489-495, 2009.
  6. ACI 318-95, Effect of Rust and Scale on the Bond Characteristics of Deformed Reinforcing Bars, ACI.
  7. Congqi Fang et al., "Corrosion influence on bond in reinforced concrete", Cement and Concrete Research, 2004, pp. 2159-2167, 2004. DOI: http://dx.doi.org/10.1016/j.cemconres.2004.04.006
  8. H-S. Lee et al., "Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion", Cement and Concrete Research, pp. 1313-1318, 2002. DOI: http://dx.doi.org/10.1016/S0008-8846(02)00783-4
  9. H-U. Kim, N-Y. Jee, "Effect of the Rebar Corrosion Rate on Bond Strength in Reinforced Concrete-factors caused by compressive strength and embedded rebar condition-", Journal of the Architectural Institute of Korea Structure and Construction, Vol.21, No11, pp.159-166, 2005.
  10. Brown, S.R., "A note on the description of surface roughness using fractal dimension", Geophysical Research Letters, Vol.14, No.11, pp. 1095-1098, 1987. DOI: http://dx.doi.org/10.1029/GL014i011p01095
  11. Y-S. Roh, S-G. Lee, "A study on the surface roughness of corroded reinforcing rebar", Journal of the Korea institute for structural maintenance Inspection, Vol.12, No.3, 2008.
  12. Mandelbrot, B. B., Fractal; Form, Chance and Dimension, Freeman, San Francisco, 1977.