DOI QR코드

DOI QR Code

해수 내 아크 아연 용사코팅 층의 전기화학적 특성

Electrochemical Characteristics of Arc Zn Thermal Spray Coating Layer in Sea Water

  • 박일초 (목포해양대학교 기관시스템공학부) ;
  • 서광철 (목포해양대학교 조선해양공학과) ;
  • 이경우 (목포해양대학교 조선해양공학과) ;
  • 김성종 (목포해양대학교 기관시스템공학부)
  • Park, Il-Cho (Division of Marine Engineering, Mokpo National Maritime University) ;
  • Seo, Gwang-Cheol (Department of Naval Archltecture and Ocean Engineering, Mokpo National Maritime University) ;
  • Lee, Gyeong-Woo (Department of Naval Archltecture and Ocean Engineering, Mokpo National Maritime University) ;
  • Kim, Seong-Jong (Division of Marine Engineering, Mokpo National Maritime University)
  • 투고 : 2015.12.16
  • 심사 : 2015.12.28
  • 발행 : 2015.12.31

초록

In this paper, arc Zn thermal spray coating was carried out on the SS400 steel, and then various electrochemical characteristics and surface damage behavior of Zn thermal spray coating layer were analyzed. As the results, the potential of Zn thermal spray coating layer presented driving voltage above 300 mV compare to that of SS400 steel. The passivity characteristic in anodic polarization curve was not presented. It was adequate to as sacrificial anode material. In the surface damage after galvanostatic experiments, uniform corrosion tendency of Zn thermal spray coating layer was clearly observed with acceleration of the dissolution reaction. In conclusion, Zn thermal spray coating could be determined to represent the corrosion protection effect by stable sacrificial anodic cathodic protection method in seawater because it had sufficient driving voltage and uniform corrosion damage tendency for the SS400 steel.

키워드

참고문헌

  1. J. H. Rhee, J. H. Lee, J. Kor. Inst. Surf. Eng. 48(2015) 68. https://doi.org/10.5695/JKISE.2015.48.2.68
  2. J. S. Kim, H. S. Kim, J. Kor. Inst. Surf. Eng. 39(2006) 25.
  3. Y. H. Jeong, U. H Nam, E. S. Byon, T. I. Kang, C. Y. Kang, J. Kor. Inst. Surf. Eng. 47(2014) 232.
  4. A. R. Cook, Anti-Corros. Methods Mater. 23(1976) 5.
  5. Y. Liu, Z. X. Zhu, Y. X. Chen, B. S. Xu, S. N. Ma, Z. X. Li, Trans. Nonferrous Met. Soc. China 14(2004) 443.
  6. Y. X. Xiao, X. H. Jiang, Y. D. Xiao, L. L. Ma, Procedia Eng. 27(2012) 1644.
  7. E. Calla, S. C. Modi, Trans. Met. Finish. Assoc. India 10(2001) 21.
  8. S. Kuroda, J. Kawakita, M. Takemoto, Corrosion 62(2006) 635. https://doi.org/10.5006/1.3280677
  9. Q. Jiang, Q. Miao, W. Liang, F. Ying, F. Tong, Y. Xu, B. Ren, Z. Yao, P. Zhang, Electrochim. Acta 115(2014) 644. https://doi.org/10.1016/j.electacta.2013.09.156
  10. Q. Jiang, Q. Miao, F. Tong, Y. Xu, B. Ren, Z. Liu, Z. Yao, Trans. Nonferrous Met. Soc. China 24(2014) 2713. https://doi.org/10.1016/S1003-6326(14)63402-6
  11. H. Y. Li, J. Y. Duan, D. D. Wei, Surf. Coat. Technol. 235(2013) 259. https://doi.org/10.1016/j.surfcoat.2013.07.046
  12. J. R. Daesen, Proceeding of the 2nd International Congress on Metallic Corrosion, New York (1963) 686.
  13. G. A. El-Mahdy, A. Nishikata, T. Tsuru, Corros. Sci. 42(2000) 183. https://doi.org/10.1016/S0010-938X(99)00057-8
  14. A. P. Yadav, A. Nishikata, T. Tsuru, Corros. Sci. 46(2004) 361. https://doi.org/10.1016/S0010-938X(03)00153-7
  15. K. M. Moon, J. H. Shin, M. H. Lee, S. Y. Lee, Y. H. Kim, J. Korean Soc. of Marine Engineering, 34(2010) 670. https://doi.org/10.5916/jkosme.2010.34.5.670
  16. J. H. Shin, K. M. Moon, Corros. Sci. Tech. 9(2010) 325.
  17. R. A. Gummow, Mater. Perform. 32(1993) 21.
  18. H. R. Lee, Corrosion of Metals, Yeunkyung cultural history, Seoul (2011) 221.
  19. W. von Baeckmann, W. Schwenk, W. Prinz ed., Handbook of Cathodic Corrosion Protection, Gulf publishing, TX (1997) 397.
  20. M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solution, NACE, Houston, TX (1974) 139.
  21. D. A. Jones, Principles and Prevention of Corrosion, 2nd ed., Prentice Hall (1995) 462.
  22. S. J. Kim, S. J. Lee, I. J. Kim, S. K. Kim, M. S. Han, S. K. Jang, Trans. Nonferrous Met. Soc. China 23(2013) 1002. https://doi.org/10.1016/S1003-6326(13)62559-5