DOI QR코드

DOI QR Code

Application of numerical simulation for the analysis and interpretation of pile-anchor system failure

  • Saleem, Masood (Faculty of Civil Engineering, University of Engineering and Technology (UET))
  • 투고 : 2014.10.31
  • 심사 : 2015.10.01
  • 발행 : 2015.12.25

초록

Progressive increase in population causing land scarcity, which is forcing construction industry to build multistory buildings having underground basements. Normally, basements are constructed for parking facility. This research work evaluates important factors which have caused the collapse of pile-anchor system at under construction five star hotel. 21 m deep excavation is carried out, to have five basements, after installation of 600 mm diameter cast in-situ contiguous concrete piles at plot periphery. To retain piles and backfill, soil anchors are installed as pit excavation is proceeded. Before collapse, anchors are designed by federal highway administration procedure and four anchor rows are installed with three strands per anchor in first row and four in remaining. However, after collapse, system is modeled and analyzed in plaxis using mohr-coulomb method. It is investigated that in-appropriate evaluation of soil properties, additional surcharge loads, lesser number of strands per anchor, shorter grouted body length and shorter pile embedment depth caused large deformations to occur which governed the collapse of east side pile wall. To resume work, old anchors are assumed to be standing at one factor of safety and then system is analyzed using finite element approach. Finally, it is concluded to use four strands per anchor in first new row and five strands in remaining three with increase in grouted and un-grouted body lengths.

키워드

참고문헌

  1. Alkaya, D. and Yesil, B. (2011), "Evaluation of a collapsed anchored bored pile retaining system by using finite elements method", Int. J. Phys. Sci., 6(1), 71-82.
  2. Ashour, A. and Hamed, A. (2012), "p-y curve and lateral response of piles in fully liquefied sands", Can. Geotech. J., 49(6), 633-650. https://doi.org/10.1139/t2012-019
  3. ASTM, A416 (1999), "Standard specification for steel strand, uncoated seven-wire for prestressed concrete", Am. Soc. Test. Mater., USA.
  4. Becker, D.E. and Moore, I.D. (2006), Canadian Foundation Engineering Manual, (4th Ed.), Cannadian Geotecnical Society, Canada.
  5. Brinkgrave, R.B., Broere, W. and Waterman, D. (2006), Plaxis 2D-version 8, Delft, The Netherlands.
  6. Galli, A. and Prisco, C. (2013), "Displacement-based design procedure for slope-stabilizing piles", Can. Geotech. J., 50(1), 41-53. https://doi.org/10.1139/cgj-2012-0104
  7. Gang, Z., Si, Y.P., Charles, W.W. and Yu, D. (2012), "Excavation effects on pile behaviour and capacity", Can. Geotech. J., 49(12), 1347-1356. https://doi.org/10.1139/t2012-095
  8. Gordon, A.F. and Mehrangiz, N. (2011), "Geotechnical resistance factors for ultimate limit state design of deep foundations in frictional soils", Can. Geotech. J., 48(11), 1742-1756. https://doi.org/10.1139/t11-068
  9. Guo, B.L., Rebecca, J.J., Charles, W.W.Ng. and Hong, Y. (2011), "Deformation characteristics of a 38 m deep excavation in soft clay", Can. Geotech. J., 48(12), 1817-1828. https://doi.org/10.1139/t11-075
  10. Jue, W., Ding, Z. and Weiqing, L. (2014), "Horizontal impedance of pile groups considering shear behavior of multilayered soils", Soil. Found., 54(5), 927-937. https://doi.org/10.1016/j.sandf.2014.09.001
  11. Kanagasabai, S., Smethurst, J.A. and Powrie, W. (2011), "Three-dimensional numerical modelling of discrete piles used to stabilize landslides", Can. Geotech. J., 48(9), 1393-1411. https://doi.org/10.1139/t11-046
  12. Kee, K.T., Zongrui, C., Chun F.L. and Yean K.C. (2014), "Pullout behavior of plate anchor in clay with linearly increasing strength", Can. Geotech. J., 51(1), 92-102. https://doi.org/10.1139/cgj-2013-0140
  13. Koichi, I., Makoto, K. and Satoru, O. (2014), "Design approach to a method for reinforcing existing caisson foundations using steel pipe sheet piles", Soil. Found., 54(2), 141-154. https://doi.org/10.1016/j.sandf.2014.02.006
  14. Lam, S.Y., Haigh, S.K. and Bolton, M.D. (2014), "Understanding ground deformation mechanisms for multi propped excavation in soft clay", Soil. Found., 54(3), 296-312. https://doi.org/10.1016/j.sandf.2014.04.005
  15. Loukidis, D. and Salgado, R. (2012), "Active pressure on gravity walls supporting purely frictional soils", Can. Geotech. J., 49(1), 78-97. https://doi.org/10.1139/t11-087
  16. Malek, A. and Alain, H. (2013), "Numerical evaluation of effects of nonlinear lateral pile vibrations on nonlinear axial response of pile shaft", Soil. Found., 53(3), 395-407. https://doi.org/10.1016/j.sandf.2013.04.002
  17. Maosong, H., Chenrong, Z., Linlong, M. and Weiming, G. (2011), "Analysis of anchor foundation with root caissons loaded in nonhomogeneous soils", Can. Geotech. J., 48(2), 234-246. https://doi.org/10.1139/T10-046
  18. Mehrangiz, N. and Gordon, A.F. (2011), "Geotechnical resistance factors for ultimate limit state design of deep foundations in cohesive soils", Can. Geotech. J., 48(11), 1729-1741. https://doi.org/10.1139/t11-066
  19. Merifield, R.S. and Sloan, S.W. (2006), "The ultimate pullout capacity of anchors in frictional soils'', Can. Geotech. J., 43(2), 852-868. https://doi.org/10.1139/t06-052
  20. Merifield, R.S., Lyamin, A.V. and Sloan, S.W. (2006), "Three-dimensional lower-bound solutions for the stability of plate anchors in sand", Geotechnique, 56(2), 123-132. https://doi.org/10.1680/geot.2006.56.2.123
  21. Sabatini, P.J., Pass, D.G. and Bachus, R.C. (1999), "Ground anchor and anchored system", Geotechnical Engineering Circular No. 4, Federal Highway Administration (FHWA), FHWA-IF-99-015.
  22. Sivakumar, V., O'Kelly, B.C., Madhav, M.R., Moorhead, C. and Rankin, B. (2013), "Granular anchors under vertical loading - axial pull", Can. Geotech. J., 50(2), 123-132. https://doi.org/10.1139/cgj-2012-0203
  23. Sofia, C.D., Arezou, M., Jaime, A.S. and Fernando, L. (2011), "Piles under cyclic axial loading: study of the friction fatigue and its importance in pile behaviour", Can. Geotech. J., 48(10), 1537-1550. https://doi.org/10.1139/t11-032
  24. Suched, L., Chanaton, S., Dariusz, W., Erwin, O. and Arumugam, B. (2013), "Finite element analysis of a deep excavation: A case study from the Bangkok MRT", Soil. Found., 53(5), 756-773. https://doi.org/10.1016/j.sandf.2013.08.013
  25. Szavits, N.A. (2008), "Advances and uncertainties in the design of anchored retaining walls using numerical modeling", Acta Geotechnica Slovenica, 5(1), 5-19.
  26. Terzaghi, K. and Peck, R.B. (1967), Soil Mechanics in Engineering Practice, (2nd Ed.), Wiley, New York, NY, USA.
  27. Tomlinson, M.J. (2001), Foundation Design and Construction, (7th Ed.), Prentice Hall, Harlow, England.
  28. Vishwas, N.K. and Jyant, K. (2011), "Effect of anchor width on pullout capacity of strip anchors in sand", Can. Geotech. J., 48(3), 511-517. https://doi.org/10.1139/T10-082
  29. Yong, T. and Mingwen, L. (2011), "Measured performance of a 26 m deep top-down excavation in downtown Shanghai", Can. Geotech. J., 48(5), 704-719. https://doi.org/10.1139/t10-100

피인용 문헌

  1. Realization and engineering application of hydraulic support optimization in residual coal remining vol.32, pp.3, 2017, https://doi.org/10.3233/JIFS-162311
  2. Model test and numerical simulation on the bearing mechanism of tunnel-type anchorage vol.12, pp.1, 2015, https://doi.org/10.12989/gae.2017.12.1.139
  3. Optimal pre-conditioning and support designs of floor heave in deep roadways vol.14, pp.5, 2015, https://doi.org/10.12989/gae.2018.14.5.429
  4. 2D and 3D numerical analysis on strut responses due to one-strut failure vol.15, pp.4, 2018, https://doi.org/10.12989/gae.2018.15.4.965
  5. The Impact of Extreme Groundwater Recharge and Dewatering Events on the Efficiency of a Deep Anchored Wall vol.56, pp.2, 2015, https://doi.org/10.1007/s11204-019-09577-8