참고문헌
- EPRI, 1996, "Flow Accelerated Corrosion in Power Plants," TR-106611-R1
- EPRI, 2006, "Recommendations for an Effective FAC Program," NSAC-202L-R3
- ASME, 2003, "Requirements for Analytical Evaluation of Pipe Wall Thinning," Code Case N-597-2
- KEPIC, 2007, "General Mechanical Components-Piping," MNC(ASME NC 2005 Addenda), Korea Electric Association
- KEPIC, 2007, "General Mechanical Components-Piping," MND(ASME NC 2004 Edition), Korea Electric Association
- KEPIC, 2007, "General Mechanical Components-Piping," MGE(ASME B31.1 2004 Edition), Korea Electric Association
- EPRI, 2009, "Application of the New ASME Design Margin to the Assessment of FAC-Induced Wall Thinning in Piping Systems," TR-1018467
- Lee, S. H., Lee, J. K and Park, C. Y., 2010, "Behavior of Elastic and Plastic Limit Load of Thinned Elbow in Real Scale Failure Test under Combined Load," Trans. of KSME(A), Vol. 34, No. 9, pp. 1293-1298
- Kim, J. W., Lee, S. H. and Park, C. Y., 2009, "Experimental evaluation of the effect of local wall thinning on the failure pressure of elbows," Nuclear Engineering and Design, 239, pp. 2737-2746 https://doi.org/10.1016/j.nucengdes.2009.10.003
- KEPIC, 2011, "Repair of Pressure Equipment and Piping", MMR (ASME PCC-2-2008 Edition), Korea Electric Association
- ASME, 2007, "Alternative Requirements for Wall Thickness Restoration of Class 2 and High Energy Class 3 Carbon Steel Piping," CC N-561-2
- ASME, 2007, "Alternative Requirements for Wall Thickness Restoration of Class 3 Moderate Carbon Steel Piping," CC N-562-2
- ASME, 2007, "Alternative Requirements for Wall Thickness Restoration of Class 2 and 3 Carbon Steel Piping for Raw Water Service," CC N-661-2
- US NRC, 2014, "Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1," Regulatory Guide 1.147