한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제32권1호
  • /
  • Pages.89-96
  • /
  • 2015
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

5축 초음파 검사장비의 기구학 해석

Kinematics Analysis of a 5-Axis Ultrasonic Inspection Equipment

  • 한명철 (부산대학교 기계공학부) ;
  • 성창민 (부산대학교 기계공학부 대학원)
  • Han, Myung-Chul (Department of Mechanical Engineering, Pusan National University) ;
  • Sung, Chang-Min (Department of Mechanical Engineering, Pusan National University)
  • 투고 : 2014.01.13
  • 심사 : 2014.11.27
  • 발행 : 2015.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, it is studied that kinematic analysis of a 5-axis ultrasonic inspection equipment. The equipment is comprised of three straight axes and two rotary axes. With features of ultrasonic, the transmitter and receiver of the equipment are vertical to a test surface, operating at regular intervals. To perform this well, the motions of every link should be found on the based of kinematic analysis of the equipment. We chose starting point for testing and defined relations among all links through transformation of coordinates. For double curvature-shaped test object, we generated test paths. To follow these, we found motions of all links using inverse kinematics. By using Matlab/Simulink, simulator was developed, so that we could find out desired trajectories of main axes for a scan.

키워드

참고문헌

  1. Kim, D. R. and Kim, J. H., "Study on Thickness Measurement about Insulation Rubber of Steel Motor case Using Ultrasonic Resonance," J. Korean Soc. Precis. Eng., Vol. 16, No. 5, pp. 89-96, 2012. https://doi.org/10.6108/KSPE.2012.16.5.089
  2. Moon, J. S. and Kim, O. S., "Thickness Evaluation for Rusting Decayed of Steel Plate using Ultrasonic Meter," Proc. of the KSME, pp. 34-36, 2013.
  3. Lee, H. J., Cho, C. H., and Cho, H. J., "Development of a Multi-Channel Ultrasonic Testing System for Automated Ultrasonic Pipe Inspection of Nuclear Power Plant," Journal of the Korean Society for Nondestructive Testing, Vol. 29, No. 2, pp. 145-152, 2009.
  4. Baek, S. Y., Lee, H. S., Kim, J. W., and Kang, D. M., "Development of Potable 3D Ultrasonic Inspection Device for Defect Inspection of Molds Materials and Parts," Proc. of KSTP Symposium, pp. 118-123, 2008.
  5. Shin, Y. S., Yoon, Y. H., and Kim, Y. H., "Measurement of Longitudinal and Transverse Wave Speed in Solid Materials Using Immersion Ultrasonic Testing," Journal of Nondestructive Testing, Vol. 28, No. 1, pp. 40-45, 2008.
  6. Krautkramer, J. and Krautkramer, H., "Ultrasonic Testing of Materials," Springer-Verlag, pp. 167-221, 1990.
  7. Programmed Instruction Handbook, "Nondestructive Testing: Ultrasonic Testing," General Dynamics, 1967.
  8. Park, E. S., "Automation System Development of Gantry-type 10-axis ultrasonic for Reliability of Aerial Composites," Proc. of KSNT Fall Conference, pp. 197-202, 2012.
  9. Han, C. H. and Park, I. K., "Ultrasonic Testing," Node Media, pp. 27-105, 2012.
  10. Craig, J. J., "Introduction to Robotics, mechanics and Control," Pearson Prentice Hall, pp. 19-134, 2005.
  11. Szilard, J., "Ultrasonic Testing: Non-conventional Testing Techniques," John Wiley & Sons, pp. 25-52, 1982.