한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제32권1호
  • /
  • Pages.63-68
  • /
  • 2015
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

누름가공과 AAO 공정을 이용한 나노-마이크로 복합패턴 제작방법 연구

A Study on Manufacturing Method of Nano-Micro Hybrid Pattern Using Indentation Machining Method and AAO Process

  • 김한희 (한국기계연구원 나노공정연구실) ;
  • 전은채 (한국기계연구원 나노공정연구실) ;
  • 최대희 (한국기계연구원 나노공정연구실) ;
  • 장웅기 (강원대학교 기계메카트로닉스 공학과) ;
  • 박용민 (강원대학교 기계메카트로닉스 공학과) ;
  • 제태진 (한국기계연구원 나노공정연구실) ;
  • 최두선 (한국기계연구원 나노공정연구실) ;
  • 김병희 (강원대학교 기계메카트로닉스 공학과) ;
  • 서영호 (강원대학교 기계메카트로닉스 공학과)
  • Kim, Han-Hee (Department of NanoManufacturing Technology, Korea Institute of Machinery and Materials) ;
  • Jeon, Eun-Chae (Department of NanoManufacturing Technology, Korea Institute of Machinery and Materials) ;
  • Choi, Dae-Hee (Department of NanoManufacturing Technology, Korea Institute of Machinery and Materials) ;
  • Jang, Woong-Ki (Department of Mechanical and Mechatronics Engineering, Kangwon National University) ;
  • Park, Yong-Min (Department of Mechanical and Mechatronics Engineering, Kangwon National University) ;
  • Je, Tae-Jin (Department of NanoManufacturing Technology, Korea Institute of Machinery and Materials) ;
  • Choi, Doo-Sun (Department of NanoManufacturing Technology, Korea Institute of Machinery and Materials) ;
  • Kim, Byeong-Hee (Department of Mechanical and Mechatronics Engineering, Kangwon National University) ;
  • Seo, Young-Ho (Department of Mechanical and Mechatronics Engineering, Kangwon National University)
  • 투고 : 2014.07.11
  • 심사 : 2014.10.22
  • 발행 : 2015.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Micro/nano patterns for optical concentration and diffusion have been studied in the various fields such as displays, optics, and sensors. Conventional micro patterns were continuous and linear shapes due to using linear-type light sources, however, recently non-continuous patterns have been applied as point sources are used for dot-type light sources such as LEDs and OLEDs. In this study, a hybrid machining technology combining an indentation machining method and an AAO process was developed for manufacturing the non-continuous micro patterns having nano patterns. First, mirror-like surfaces ($R_a<20nm$) of pure Aluminum substrates were obtained by optimizing cutting conditions. Then, The letter of 'K' consisting of the arrays of the micro patterns was manufactured by the indentation machining method which has a similar principle to indentation hardness testing. Finally, nano patterns were machined by AAO process on the micro patterns. Conclusively, a specific letter having nano-micro hybrid patterns was manufactured in this study.

키워드

참고문헌

  1. Zhou, S., Cao, B., Liu, S., and Ding, H., "Improved Light Extraction Efficiency of Gan-Based Leds with Patterned Sapphire Substrate and Patterned Ito," Optics & Laser Technology, Vol. 44, No. 7, pp. 2302-2305, 2012. https://doi.org/10.1016/j.optlastec.2012.02.008
  2. Pudis, D., Suslik, L., Skriniarova, J., Kovac, J., Kovac Jr, J., et al., "Effect of 2D Photonic Structure Patterned in the LED Surface on Emission Properties," Applied Surface Science, Vol. 269, pp. 161-165, 2013. https://doi.org/10.1016/j.apsusc.2012.10.030
  3. Jeong, S.-M., Kissinger, S., Kim, D.-W., Lee, S. J., and Kim, J.-S., "Characteristic Enhancement of the Blue LED Chip by the Growth and Fabrication on Patterned Sapphire (0 0 0 1) Substrate," J. of Crystal Growth, Vol. 312, No. 2, pp. 258-262, 2010. https://doi.org/10.1016/j.jcrysgro.2009.10.049
  4. Cho, J.-Y., Hong, S.-H., Byeon, K.-J., and Lee, H., "Light Extraction Efficiency Improvement in GaNbased Blue Light Emitting Diode with Two-Dimensional Nano-Cavity Structure," Thin Solid Films, Vol. 521, pp. 115-118, 2012. https://doi.org/10.1016/j.tsf.2012.02.040
  5. Ee, Y.-K., Li, X.-H., Biser, J., Cao, W., Chan, H. M., and et al., "Abbreviated MOVPE nucleation of IIINitride Light-Emitting Diodes on Nano-Patterned Sapphire," Journal of Crystal Growth, Vol. 312, No. 8, pp. 1311-1315, 2010. https://doi.org/10.1016/j.jcrysgro.2009.10.029
  6. Wu, G., Yen, C., Chien, H., Lu, H., Chang, T., and Nee, T., "Effects of Nano-Structured Photonic Crystals on Light Extraction Enhancement of Nitride Light-Emitting Diodes," Thin Solid Films, Vol. 519, No. 15, pp. 5074-5077, 2011. https://doi.org/10.1016/j.tsf.2011.01.131
  7. Kim, S. H., Lee, K.-D., Kim, J.-Y., Kwon, M.-K., and Park, S.-J., "Fabrication of Photonic Crystal Structures on Light Emitting Diodes by Nanoimprint Lithography," Nanotechnology, Vol. 18, No. 5, Paper No. 055306, 2007. https://doi.org/10.1088/0957-4484/18/5/055306
  8. Xu, T., Shi, H., Wu, Y. K., Kaplan, A. F., Ok, J. G., and Guo, L. J., "Structural Colors: From Plasmonic to Carbon Nanostructures," Small, Vol. 7, No. 22, pp. 3128-3136, 2011. https://doi.org/10.1002/smll.201101068
  9. Barnes, W. L., Dereux, A., and Ebbesen, T. W., "Surface Plasmon Subwavelength Optics," Nature, Vol. 424, No. 6950, pp. 824-830, 2003. https://doi.org/10.1038/nature01937
  10. Wang, X., Akahane, T., Orikasa, H., Kyotani, T., and Fu, Y., "Brilliant and Tunable Color of Carbon-Coated Thin Anodic Aluminum oxide Films," Applied physics letters, Vol. 91, No. 1, Paper No. 011908, 2007. https://doi.org/10.1063/1.2754649
  11. Lee, H.-S., Yoon, Y.-T., Lee, S.-s., Kim, S.-H., and Lee, K.-D., "Color Filter based on a Subwavelength Patterned Metal Grating," Optics express, Vol. 15, No. 23, pp. 15457-15463, 2007. https://doi.org/10.1364/OE.15.015457
  12. Park, E. S., Choi, H. J., Kim, H. H., Jeon, E. c., and Je, T. J., "Study on Machining High-Aspect Ratio Micro Barrier Rib Array Structures using Orthogonal Cutting Method," J. Korean Soc. Precis. Eng., Vol. 29, No. 12, pp. 1272-1218, 2012. https://doi.org/10.7736/KSPE.2012.29.12.1272

피인용 문헌

  1. A Study on Accuracy Improvement of Dual Micro Patterns Using Magnetic Abrasive Deburring vol.40, pp.11, 2016, https://doi.org/10.3795/KSME-A.2016.40.11.943