참고문헌
- I. Y. Ohm and C. J. Park, "Effect of Fuel Stratification on Initial Flame Development: Part 1 - Without Swirl," Int. J. Automotive Technology, Vol.7, No.5, pp.519-526, 2006.
- I. Y. Ohm and C. J. Park, "Effect of Fuel Stratification on Initial Flame Development: Part 2-Low Swirl Condition," Int. J. Automotive Technology, Vol.9, No.6, pp.671-678, 2008. https://doi.org/10.1007/s12239-008-0079-5
- I. Y. Ohm and C. J. Park, "Effect of Fuel Stratification on Initial Flame Development: Part 3-High Swirl Condition," Int. J. Automotive Technology, Vol.12, No.5, pp.653-660, 2011. https://doi.org/10.1007/s12239-011-0076-y
- M. G. Kang and I. Y. Ohm, "Effect of Intake Flow Control Method on Part Load Performance in SI Engine - Comparison of Throttling and Masking," Transactions of KSAE, Vol.22, No.2, pp.156-165, 2014. https://doi.org/10.7467/KSAE.2014.22.2.156
- M. G. Kang and I. Y. Ohm, "Effect of Intake Flow Control Method on Part Load Performance in SI Engine - EGR Characteristics and Comparison of Dilution Method," Transactions of KSAE, Vol.22, No.4, pp.121-130, 2014. https://doi.org/10.7467/KSAE.2014.22.4.121
- I. Y. Ohm and Y. S. Cho, "In-cylinder Fuel Behavior according to Fuel Injection Timing and Port Characteristics in an SI Engine : Part I - Without Swirl," Transactions of KSAE, Vol.9, No.2, pp.19-27, 2001.
- I. Y. Ohm and Y. S. Cho, "In-cylinder Fuel Behavior according to Fuel Injection Timing and Port Characteristics in an SI Engine : Part II - With Low/Medium Swirl," Transactions of KSAE, Vol.9, No.3, pp.9-17, 2001.
- I. Y. Ohm and Y. S. Cho, "In-cylinder Fuel Behavior according to Fuel Injection Timing and Port Characteristics in an SI Engine : Part III - With High Swirl," Transactions of KSAE, Vol.9, No.3, pp.18-26, 2001.
- J. B. Heywood, Internal Combustion Engine Fundamentals, Int. Edn., McGraw-Hill, Singapore, pp.343-345, 1988.
- I. Y. Ohm and C. J. Park, "In-cylinder Intake Flow Characteristics according to Inlet Valve Angle," Transactions of KSAE, Vol.14, No.3, pp.142-149, 2006.
- I. Y. Ohm and C. J. Park, "In-cylinder Compression Flow Characteristics according to Inlet Valve Angle," Transactions of KSAE, Vol.14, No.4, pp.77-83, 2006.
- I. Y. Ohm and C. J. Park, "In-cylinder Intake Flow Characteristics of Helical Port Engines with Wide Valve Angle," Transactions of KSME, Vol.32, No.10, pp.761-768, 2008. https://doi.org/10.3795/KSME-B.2008.32.10.761
- I. Y. Ohm and C. J. Park, "In-cylinder Compression Flow Characteristics of Helical Port Engines with Wide Valve Angle," Transactions of KSME, Vol.32, No.1, pp.9-16, 2009. https://doi.org/10.3795/KSME-B.2009.33.1.9
- I. Y. Ohm and C. J. Park, "Effect of Inlet Valve Angle on In-cylinder Swirl Generation Characteristics(I)," Transactions of KSAE, Vol.16, No.6, pp.148-156, 2008.
- I. Y. Ohm and C. J. Park, "Effect of Inlet Valve Angle on In-cylinder Swirl Generation Characteristics(II)," Transactions of KSAE, Vol.17, No.1, pp.42-48, 2009.
- I. Y. Ohm, "Effects of Intake Valve Angle on Combustion Characteristic in an SI Engine," Int. J. Automotive Technology, Vol.14, No.4, pp.529-537, 2013. https://doi.org/10.1007/s12239-013-0057-4
- J. B. Heywood, Internal Combustion Engine Fundamentals, Int. Edn., McGraw-Hill, Singapore, pp.226-227, 1988.
- Superflow Corporation, Superflow 600 Instructions, Appendix I, Colorado Springs, 1988.
- R. Stone, Introduction to Internal Combustion Engines, 2nd Edn., McGraw-Hill, Hong Kong, pp.183-185, 1992.
- J. B. Heywood, Internal Combustion Engine Fundamentals, Int. Edn., McGraw-Hill, Singapore, pp.225-227, 1988.
- J. B. Heywood, Internal Combustion Engine Fundamentals, Int. Edn., McGraw-Hill, Singapore, pp.349-351, 1988.
- SwRI, Cylinder Head Port Design, Presentation, 1999.
- A. E. Perry and M. S. Chong, "A Description of Eddying Motions and Flow Patterns Using Critical-point Concepts," Annual Review of Fluid Mechanics, Vol.19, pp.125-155, 1987. https://doi.org/10.1146/annurev.fl.19.010187.001013
피인용 문헌
- Study on Evaluation Method of Flow Characteristics in Steady Flow Bench(5)-Effect of Evaluation Position vol.25, pp.2, 2017, https://doi.org/10.7467/KSAE.2017.25.2.179
- Study on Evaluation Method of Flow Characteristics in Steady Flow Bench(6) : Effect of Axial Velocity vol.26, pp.2, 2018, https://doi.org/10.7467/KSAE.2018.26.2.174