References
- Falvey, H., 1993, "A primer on draft tube surging", Hydro Review (February), 12(1) pp. 77-86.
- Tridon, S., Barre, S., Ciocan, G-D, and Tomas, L., 2010, "Experimental analysis of the swirling flow in a Francis turbine draft tube: Focus on radial velocity component determination". European Journal of Mechanics B/Fluids 29(4) pp.321-335. https://doi.org/10.1016/j.euromechflu.2010.02.004
- Nishi, M., and Liu, S., 2013, "An outlook on the Draft-Tube-Surge Study" International Journal of Fluid Machinery and Systems, 6(1), 33-48. https://doi.org/10.5293/IJFMS.2013.6.1.033
- Falvey, H., and Cassidy, J., 1970, "Frequency and amplitude of pressure surges generated by swirling flows" In Proceedings of the International Association for Hydraulic Research. Symposium on Hydraulic Machinery and Cavitation. Stockholm Sweden, No. E1 1-12.
- Padle, U., 1974, "Model and prototype turbine draft tube surge analysis by the swirl momentum method", In Proceedings of the International Association for Hydraulic Research. Symposium on Hydraulic Machinery and Cavitation. Stockholm Sweden No. III 1-13.
- Monacelli, G., and Cooper, P., 1987, "Performance of draft tubes for small-hydropower turbine", In Water Power'87 1200-1209 ASCE.
- Kubota, T., Han, F., and Avellan, F., 1996, "Performance analysis of draft tube for GAMM Francis turbine", In Proceedings of the XVIII IAHR Symposium, Hydraulic Machinery and Cavitation. Dordrecht NL No. 1 pp. 130-139.
- Shyy, W., and Braaten, M., 1986, "Three-dimensional analysis of the flow in a curved hydraulic turbine draft tube", International Journal of Numerical Methods in Fluids 6(12) pp.861-882.. https://doi.org/10.1002/fld.1650061202
- Vu, T., and Shyy, W., 1990, "Navier-Stokes flow analysis for hydraulic turbine draft tubes", Journal of Fluids Engineering 112(2) pp. 119-204.
- Vu, T., 1989, "A design parameter study of turbine draft tube by viscous flow analysis", WATERPOWER'89 pp. 557-566.
- Mauri, S., Kueny, J., and Avellan, F., 2002, "Werle-Legendre separation in a hydraulic machine draft tube", In ASME 2002 Fluids Engineering Division Summer Meeting, Montreal, Quebec Canada.
- Vu, T. C., Devals, C., Zhang, Y., Nennemann, B., & Guibault, F. (2011, March). "Steady and unsteady flow computation in an elbow draft tube with experimental validation". International Journal of Fluid Machinery and Systems, 4(1), pp. 85-96. https://doi.org/10.5293/IJFMS.2011.4.1.085
- Susan-Resiga, R., Ciocan, G., Anton, I., and Avellan, F., 2006, "Analysis of the Swirling Flow Downstream a Francis Turbine Runner", ASME J. Fluids Eng., 128(1), pp. 177-189. https://doi.org/10.1115/1.2137341
- Gagnon, J., Iliescu, M., Ciocan, G., and Deschenes, C., 2008, "Experimental Investigation of Runner Outlet Flow in Axial Turbine With LDV and Stereo- scopic PIV", 24th IAHR Symposium on Hydraulic Machinery and Systems, Foz do Iguassu, Brazil, October, pp. 27-31.
- Gagnon, J.-M., Aeschlimann, V., Houde, S., Flemming, F., Coulson, S., and Deschênes, C., 2012, "Experimental Investigation of Draft Tube Inlet Velocity Field of a Propeller Turbine", ASME J. Fluids Eng., 134(10), p. 101102. https://doi.org/10.1115/1.4007523
- Muntean, S., Ciocan, T., Susan-Resiga, R., Cervantes, M., and Nilsson, H., 2012, "Mathematical, Numerical and Experimental Analysis of the Swirling Flow at a Kaplan Runner Outlet", Earth and Environmental Science (IOP Conference Series), Vol. 15, IOP Publishing, p. 032001.
- Susan-Resiga, R., Muntean, S., Ciocan, T., Joubarne, E., Leroy, P., and Bornard, L., 2012, "Influence of the Velocity Field at the Inlet of a Francis Turbine Draft Tube on Performance Over an Operating Range", Earth and Environmental Science (IOP Conference Series), Vol. 15, IOP Publishing, p. 032008.
- Galvan, S., Reggio, M., and Guibault, F., 2012, "Optimization of the inlet velocity profile in a conical diffuser", ASME 2012 Fluids Engineering Summer Meeting, Rio Grande, Puerto Rico, USA, FEDSM2012-72103.
- Galvan, S., Reggio, M., and Guibault, F., 2013, "Inlet velocity profile optimization of the turbine 99 draft tube", ASME 2013 Fluids Engineering Summer Meeting, Incline Village Nevada USA, FEDSM2013-16473.
- isight, 1994, iSIGHT 9.0.1 Engineous Software Inc.
- Gebart, B., Gustavsson, L., and Karlsson, R, 2000, "Proc. of Turbine-99 - Workshop on draft tube flow", Lulea University of Technology, Technical Report 2000:11.
- Engstrom, T., Gustavsson, L., and Karlsson, R., 2001, "Proc. of Turbine-99 -Workshop 2", Lulea University of Technology.
- Cervantes, M., Engstrom, T., and Gustavsson, L, 2005, "Proc. of Turbine-99 III", Lulea University of Technology, Technical Report 2005:20.
-
Galvan, S., Reggio, M., and Guibault, F., 2011, "Assessment study of k-
${\varepsilon}$ turbulence models and near-wall modeling for steady state swirling flow analysis in draft tube using Fluent", Eng. Appl. Comput. Fluid Mech., 5(4) pp. 459-478. - Galvan S., Rubio, C., Pacheco, J., Mendoza, C., and Toledo, M., 2013, "Optimization Methodology Assessment for the Inlet Velocity Profile of a Hydraulic Turbine Draft Tube Part I: Computer Optimization Techniques", Journal of Global Optimization 55(1) pp. 53-72. https://doi.org/10.1007/s10898-012-9946-8