참고문헌
- Andrew Bond, Andrew Harris (2008), Decoding Eurocode 7, Taylor&Francis, pp. 155, 178.
- AASHTO (1998). AASHTO LRFD bridge design specification, AASHTO, Washington DC., pp. 10-64, 66, 91.
- AASHTO (2007), AASHTO LRFD bridge design specifications 4th edition, AASHTO, Washington DC., pp. 3-37, 10-40-43.
- Canadian Geotechnical Society (2006), Canadian Foundation Engineering Manual 4th edition, Bitech Publishers, Vancouver, BC., pp. 296-298.
- EN1990 (2004), EN 1990 - EUROCODE : BASIS OF STRUCTURAL DESIGN ANNEX A2 : Application for bridges (Normative), EUROPEAN STANDARD NORME EUROPEENNE EUROPAISCHE NORM., pp. 6-22.
- EN1997 (2004), Eurocode 7: Geotechnical design - part 1 : General rules, BRITISH STANDARD, pp. 130-132, 164-165.
- Freudenthal, A. M. (1947), Safety of Structures. Transactions. ASCE, Vol. 112, pp. 125-159
- Goda, Y. (1973), "A New Method of Wave Pressure Calculation for the Design of Composite Breakwater", Report of the Port and Harbour Research Institute, Vol. 12, No. 3. pp. 31-69 (in Japanese).
- KICTEP (2007), Super long span bridge R&D center : Pre-Planning study, Final Report, Korea Agency for infrastructure Technology, pp. 102, 190 (in Korean).
- Korean Geotechnical Society (2002), Deep foundation, Goomibook, pp. 595 (in Korean).
- Korean Geotechnical Society (2009), Structural foundation design criteria, Goomibook, pp. 320-322 (in Korean).
- Korea Highway Corporation (2002), Guidelines for design of drilled shafts in rock, pp. 6-7 (in Korean).
- Korean Society of Civil Engineers & Korea Bridge Design Engineering Research Center (2008), Highway bridge design criteria, kimoondang, pp. 41 (in Korean).
- Korean Society of Civil Engineers (2012), Highway bridge design criteria (limit state design), Ministry of Land, Infrastructure and Transport., pp. 3-7-10 (in Korean).
- Midas GTS (2011a), Getting Started, Midas Information Technology Co., Ltd, pp. 1-104 (in Korean).
- Midas GTS (2011b), Analysis reference, Midas Information Technology Co., Ltd., pp. 1-300 (in Korean).
- O'Neill, M. W. and L. C. Reese (1999). Drilled shafts: Construction Procedures and Design Methods, FHWA-IF-99-025, Federal Highway Administration, U.S. Department of Transportation, Washington, DC. pp. A-22.
- Pugsley, A. (1955), Report on structural Safety. Structural Engineer, Vol. 33, No. 5, pp. 141-149.
- Seoyeong Engineering (2012), Prototype structural calculation document of cable-stayed girder bridge, Super long span bridge R&D center pp. 9-11, 293-315 (in Korean).