References
- Park, R., and Paulay, T., "Reinforced Concrete Structures", Wiley Interscience Publication, New Jersey, USA, 1933, p.769.
- Siao, W. B., "Shear Strength of Short Reinforced Concrete Walls, Corbels, and Deep Beams", ACI Structural Journal, Vol.91, No.2, 1994, pp.123-132.
- Hwang, S. J., Fang, W. H., Lee, H. J., and Yu, H. W., "Analytical Model for Predicting Shear Strength of Squat Walls", Journal of Structural Engineering, ASCE, Vol.127, No.1, 2001, pp.43-50. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(43)
- ACI Committee 318, "Building Code Requirements for Structural Concrete (ACI 318M-11) and Commentary", American Concrete Institute, Farmington Hills, MI, USA, 2011, p.503.
- Wood, S. L., "Shear Strength of Low-Rise Reinforced Concrete Walls, ACI Structural Journal, Vol.87, No.1, 1990, pp.99-107.
- Gulec, C. K., and Whittaker, A. S., "Empirical Equations for Peak Shear Strength of Low Aspect Ratio Reinforced Concrete Walls", ACI Structural Journal, Vol.108, No.1, 2011, pp.80-89.
- Yang, K. H., "Development of Performance-Based Design Guideline for High-density Concrete Walls", Technical Report (2nd year). Kyonggi University, 2013, p.115 (in Korean).
- Mun, J. H., "Flexure and Shear Design Approach of High-Weight Concrete Shear Walls", Ph.D. Thesis, Architectural Engineering, Kyonggi University, South Korea, 2014 (in Korean).
- Bazant, Z. P., and Planas, J., "Fracture and Size Effect in Concrete and Other Quasibrittle Materials", CRC, New York, 1998.
- Schafer, K., "Strut-and-Tie Models for the Design of Structural Concrete, Notes of Workshop", Department of Civil Engineering, National Cheng Kung University, Tainan, Taiwan, 1996.
- Zhang, L. X. B., and Hsu, T. T. C., "Behavior and Analysis of 100 MPa Concrete Member Membrane Elements," Journal of Structural Engineering, ASCE, Vol.124, No.1, 1998, pp.24-34. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(24)
- Yang, K. H., and Ashour, A. F., "Strut-and-Tie Model Based on Crack Band Theory for Deep Beams", Journal of Structural Engineering, ASCE, Vol.137, No.10, 2011, pp.1030-1038. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000351
- CEP-FIP Model Code 1990, "Design of Concrete Structures", Comite Euro-International du Beton, Thomas Telford Services Ltd, London, 1993.
- Marti, P., "Basic Tools of Reinforced Concrete Beam Design", ACI Journal, Vol.82, No.1, 1985, pp.46-56.
- Mun, J. H., and Yang, K. H., "Plastic Hinge Lengths Model for Reinforced Concrete Slender Shear Walls", Magazine of Concrete Research, Accepted, 2014.
- Sim, J. I., Yang, K. H., Lee, E. T., and Yi, S. T., "Effect of Aggregate and Specimen Sizes on Lightweight Concrete Fracture Energy", Journal of Materials in Civil Engineering, ASCE, Vol.26, No.5, 2014, pp.845-854. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000884
- Hirosawa, M., "Past Experimental Results on Reinforced Concrete Shear Walls and Analysis on Them", Kenchiku Kenkyu Shiryo No. 6, Building Research Institute, Ministry of Construction, 1975 (in Japanese).
- Tan, K. H., Kong, F. K., Teng, S., and Weng, L. W., "Effect of Web Reinforcement on High-Strength Concrete Deep Beams", ACI Structural Journal, Vol.94, No.5, 1997, pp.572-582.
- Maier, J., "Shear Wall Tests", Concrete Shear in Earthquake, University of Houston, 1992.
- Lefas, L. D., Kotsovos, M. D., and Ambraseys, N. N., "Behavior of Reinforced Concrete Structural Walls: Strength, Deformation Characteristics and Failure Mechanism", ACI Structural Journal, Vol.87, No.1, 1990, pp.23-31.
- Bazant, Z. P., and Sun, H. H., "Size Effect in Diagonal Shear Failure: Influence of Aggregate Size and Stirrups", ACI Materials Journal, Vol.84, No.4, 1987, pp.259-272.
- Wallace, J. W., "Behavior and Design of High-Strength RC Walls", ACI Special Publication, Vol.176, 1998, pp.259-279.
- Wasiewicz, Z. F., "Sliding Shear in Low-Rise Shear Wall under Lateral Load Reversals", M.S. Thesis, Department of Civil Engineering, Ottawa University, Canada, 1988.
- Yun, H. D., "Seismic Resistance of High Strength Reinforced Concrete Structural Walls", Ph.D. Thesis, Architectural Engineering, Hanyang University, South Korea, 1994 (in Korean).