DOI QR코드

DOI QR Code

A Short Kinetic Mechanism for Premixed Flames of Aromatic Compound : Benzene

방향족 화합물 화염의 축소 반응 메카니즘 개발 : 벤젠

  • Lee, Ki Yong (Department of Mechanical Engineering, Andong National University)
  • 이기용 (안동대학교 기계공학과)
  • Received : 2015.11.29
  • Accepted : 2015.12.08
  • Published : 2015.12.30

Abstract

A short kinetic mechanism for premixed benzene/air flames was developed with a reduction method of Simulation Error Minimization Connectivity Method(SEM-CM). It consisted of 38 species and 336 elementary reactions. Flame speeds were calculated and compared with those from full mechanisms and experiments of other researchers. Flame temperature, the heat release rate, the concentration profiles of major species and radicals were also calculated with both mechanism. Those comparisons are in good agreement between the full mechanism and the short mechanism at high pressure condition. In numerical work the running time with the short mechanism was over 12 times faster than one with the full mechanism.

Keywords

References

  1. E.S. Golovina and G.G. Fyodorov, Influence of physical and chemical factors on burning velocity, Sixth Symposium (International) on Combustion, The Combustion Institute Pittsburgh, 1956, 88-96.
  2. S.G. Davis, H. Wang, K. Breinsky, and C.K. Law, Laminar flame speeds and oxidation kinetics of benene-air and toluene-air flames, Twenty-Sixth Symposium (International) on Combustion/The combustion institute, 1996, 1025-1033.
  3. R.J. Johnston and J.T. Farrell, Laminar burning velocities and Markstein lengths of aromatics at elevated temperature and pressure, Proceedings of the Combustion Institute, 30 (2005) 217-224. https://doi.org/10.1016/j.proci.2004.08.075
  4. C. Ji, E. Dames, H. Wang, and F.N. Egolfopoulos, Propagation and extinction of benzene and alkylated benzene flames, Combustion and Flame, 159 (2012) 1070-1081. https://doi.org/10.1016/j.combustflame.2011.10.017
  5. D.A. Bittker, Detailed mechanism for oxidation of benzene, Combustion Science and Technology, 79 (1991) 49-72. https://doi.org/10.1080/00102209108951757
  6. H.Y. Zhang and J.T. Mckinnon, Elementary reaction modeling of high-temperature benzene combustion, Combustion Science and Technology, 107 (1995) 261-399. https://doi.org/10.1080/00102209508907808
  7. A. Ristori, P. Dagaut, A.E. Bakali, G. Penglon, and M. Cathonnet, Benzene oxidation results in a JDR and comprehensive kinetic modeling in JSR, shock-tube and flame, Combustion Science and Technology, 167 (2001) 223-256. https://doi.org/10.1080/00102200108952183
  8. H. Richter, S, Granata, W.H. Green, and J.B. Howard, Detailed modeling of PAH and soot formation in a laminar premixed benzene/oxygen/argon low-pressure flame, Proceedings of the Combustion Institute, 30 (2005) 1394-1405.
  9. K. Narayanaswamy, G. Blanquart, and H. Pitsch, A consistent chemical mechanism for oxidation of substituted aromatic species, Combustion and Flame, 157 (2010) 1879-1898. https://doi.org/10.1016/j.combustflame.2010.07.009
  10. G. Vourliotakis, G. Skevis, and M.A. Founti, A detailed kinetic modelling study of benzene oxidation and combustion in premixed flames and ideal reactors, Energy & Fuels, 25 (2011) 1950-1963. https://doi.org/10.1021/ef101712p
  11. CHEMKIN-PRO, Reaction Design Inc., San Diego, CA 92121, USA http://www.reactiondesign.com.
  12. Z.M. Djurisic, Detailed kinetic modeling of benzene and toluene oxidation at high temperatures, MS Thesis, University of Delaware, 1999.
  13. G.J. Gibbs and H.F. Calcote, Effect of molecular structure on burning velocity, J. Chem. Eng. Data, 4(3) (1959) 226-237. https://doi.org/10.1021/je60003a011
  14. H. Wang, X. You, A.V. Joshi, S.G. Davis, A. Laskin, F. Egolfopoulos, and C.K. Law, "USC Mech Version II, High-temperature combustion reaction model of $H_2/CO/C_1-C_4$ compounds," http://ignis.usc.edu/USC_Mech_II.htm, May 2007.
  15. K.Y. Lee, T.H. Nam, H.S. You, and D.S. Choi, The Flame structure of freely porpagating $CH_4/O_2/N_2$ premixed flames on the $O_2$ enrichment, Trans. Korean Soc. Mech. Eng. B, 26(4) (2002) 555-560. https://doi.org/10.3795/KSME-B.2002.26.4.555
  16. T.J. Kim, R.A. Yetter, and F.L. Dryer, New results on moist CO oxidation: high pressure, high temperature experiments and comprehensive, Twenty- Fifth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1994, 759-766.
  17. GRI-Mech Version 3.0 7/30/99, http://www.me.berkeley.edu/gri_mech/.
  18. T. Nagy and T. Yuranyi, Reduction of very large reaction mechanisms using methods based on simulation error minimization, Combustion and Flame, 156 (2009) 417-428. https://doi.org/10.1016/j.combustflame.2008.11.001
  19. S.R. Turns, An Introduction to Combustion, 2nd Ed., McGraw-Hill, 2000.
  20. M.D. Smooke and V. Giovangigli, Formulation of the Premixed and Nonpremixed Test Problems, in Lecture Notes in Physics 384, Smooke, M.D. (Ed), Springer-Verlag, 1991.