초록
보행자 인식은 차량자율주행 및 사고방지를 위해 중요한 요소기술로서 많이 연구되고 있다. 이 기술들은 크게 카메라기반과 LIDAR 기반, 두 가지로 구별할 수 있다. 카메라 기반 방법과 대비되어 LIDAR 기반 방법은 화각이 넓고 조도환경에 영향을 받지 않는다는 강점이 있다. 하지만 LIDAR 기반 방법은 먼 물체를 인식하기엔 센서 해상도가 낮고, 복잡한 환경에서는 분할 오류나 폐색 등의 원인으로 인식률이 낮아진다는 문제점이 있다. 본 논문에서는 3차원 LIDAR 기반 보행자 탐지 알고리즘의 낮은 인식률을 개선시키기 위해 다중객체추적 기법의 하나인 GM-PHD 필터를 이용한 두 가지 성능 향상 방법을 제안한다. 첫 번째 방법은 GM-PHD 필터를 이용해 이전 프레임의 포인트를 현재 프레임의 물체에 자동으로 누적하여 물체 해상도 및 보행자 분류 성능을 향상시킨다. 두 번째 방법은 인식 성능이 낮은 상황에 맞춰 개선된 GM-PHD 필터를 분류된 다중객체에 적용하여 탐지 성능을 더욱 강화시킨다. 직접 취득한 도로 주행 데이터에 두 방법을 적용하여 제안한 방법이 기존의 보행자 탐지 알고리즘 성능을 대폭 향상시키는 것을 정량적으로 증명하였다.
Pedestrian detection has largely been researched as one of the important technologies for autonomous driving vehicle and preventing accidents. There are two categories for pedestrian detection, camera-based and LIDAR-based. LIDAR-based methods have the advantage of the wide angle of view and insensitivity of illuminance change while camera-based methods have not. However, there are several problems with 3D LIDAR, such as insufficient resolution to detect distant pedestrians and decrease in detection rate in a complex situation due to segmentation error and occlusion. In this paper, two methods using GM-PHD filter are proposed to improve the poor rates of pedestrian detection algorithms based on 3D LIDAR. First one improves detection performance and resolution of object by automatic accumulation of points in previous frames onto current objects. Second one additionally enhances the detection results by applying the GM-PHD filter which is modified in order to handle the poor situation to classified multi target. A quantitative evaluation with autonomously acquired road environment data shows the proposed methods highly increase the performance of existing pedestrian detection algorithms.