Corrosion Science and Technology

  • 제14권6호
  • /
  • Pages.267-272
  • /
  • 2015
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Microbiologically Induced Corrosion of Three Tubular Materials

  • Mukadam, S. (Petroleum Research Center, Kuwait Institute for Scientific Research) ;
  • Al-Hashem, A. (Petroleum Research Center, Kuwait Institute for Scientific Research)
  • 투고 : 2015.07.22
  • 심사 : 2015.11.27
  • 발행 : 2015.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The performance of three tubular materials (C-90, L-80, and N-80) was evaluated in a synthetic brine inoculated with sulfate-reducing bacteria (SRB) in the absence and presence of biocides. A flow loop was used in the evaluation of the three alloys. Morphological examination of the alloy surfaces after exposure to SRB and after biocide treatment was performed by scanning electron microscopy (SEM) to determine the nature of any localized corrosion. The SE images of the coupon samples showed a marked difference between the biocide-treated and untreated samples. Small pits were observed on the ultrasonically cleaned surfaces of the three alloys after exposure to SRB. The biocide treatment reduced the number of SRB on the surfaces of the alloys. Results indicated that C-90 and L-80 alloys exhibited better MIC resistance than N-80 under the conditions used in this study.

키워드

참고문헌

  1. J. M. Galbraith, K.L. Lofgren, Mater. Performance, 26, 42 (1987).
  2. R. A. Agostini, R. D. Young, Mater. Performance, 30, 75 (1991).
  3. W. Eden, P. J. Laycock, M. Fielder, Oil reservoir souring, p. 87, HSE Books, UK, http://www.hse.gov.uk/research/othpdf/200-399/oth385.pdf (1993).
  4. O. H. Pucci, Int. Biodeter. Biodegr., 37, 116 (1996).
  5. Z. I. Khatib, J. R. Salanitro, proceedings of the SPE Annual Technical Conference and Exhibition, p. 2, Society of Petroleum Engineers, San Antonio, Texas (1997).
  6. S. A. Lagoven, Practical Manual of Biocorrosion and Biofouling for the Industry, p. 151, CYTED Research Network, La Plata, Argentina (1998).
  7. L. C. Jordan, J. M. Walsh, Proceedings of the Corrosion 2004, p. 11, NACE, New Orleans (2004).
  8. G. E. Jenneman, P. D. Moffitt, G. A. Bala, R. H. Webb, Society of Petroleum Engineers, 14, 219 (1999).
  9. J. Larsen, M. H. Rod, S. Zwolle, Proceedings of the Corrosion 2004, p. 18, NACE, New Orleans (2004).
  10. R. D. Bryant, W. Jansen, J. Boivin, E. J. Laishley, and J. W. Costerton, Appl. Environ. Microb., 57, 2804 (1991).
  11. J. A. Straatmann, and J. Grobner, Met. Sci. Heat. Treat., 19, 610 (1977). https://doi.org/10.1007/BF00673551
  12. A. V. Sobral-Santiago, D. Da C. Magalhaes, H. F. G. de Abreu, H. B. de Sant Ana, and V. M. M. Melo, Acta Micoscopica, 12, 209 (2003).
  13. F. P. de Franca, and M. T. S. Lutterbach, J. Ind. Microbiol., 17, 6 (1996). https://doi.org/10.1007/BF01570140
  14. C. O. Obuekwe, D. W. S. Westlake, F. D. Cook, and J. W. Costerton, Appl. Environ. Microb., 41, 766 (1981).
  15. J. M. Romero, C. Angeles-Chavez, and M. Amaya, Corros. Eng. Sci. Techn., 39, 261 (2004). https://doi.org/10.1179/147842204X2899