DOI QR코드

DOI QR Code

Change of transmission characteristics of FSSs in hybrid composites due to residual stresses

  • 투고 : 2013.02.28
  • 심사 : 2015.07.10
  • 발행 : 2015.12.25

초록

The frequency selective surface (FSS) embedded hybrid composite materials have been developed to provide excellent mechanical and specific electromagnetic properties. Radar absorbing structures (RASs) are an example material that provides both radar absorbing properties and structural characteristics. The absorbing efficiency of an RAS can be improved using selected materials having special absorptive properties and structural characteristics and can be in the form of multi-layers or have a certain stacking sequence. However, residual stresses occur in FSS embedded composite structures after co-curing due to a mismatch between the coefficients of thermal expansion of the FSS and the composite material. In this study, to develop an RAS, the thermal residual stresses of FSS embedded composite structures were analyzed using finite element analysis, considering the effect of stacking sequence of composite laminates with square loop (SL) and double square loop (DSL) FSS patterns. The FSS radar absorbing efficiency was measured in the K-band frequency range of 21.6 GHz. Residual stress leads to a change in the deformation of the FSS pattern. Using these results, the effect of transmission characteristics with respect to the deformation on FSS pattern was analyzed using an FSS Simulator.

키워드

과제정보

연구 과제 주관 기관 : Agency for Defense Development

참고문헌

  1. Bradshaw, P. (1989), "Signature management and structural materials, Material and processing - move to the 90's", Proceedings of Society for the Advancement of Material & Process Engineering, Birmingham, UK, July.
  2. Chung, D. (2001), "Electromagnetic interference shielding effectiveness of carbon materials", Carbon, 39(2), 279-285. https://doi.org/10.1016/S0008-6223(00)00184-6
  3. Gigliotti, M., Wisnom, M. and Potter, K. (2003), "Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates", Compos. Sci. Technol., 63(2), 187-197. https://doi.org/10.1016/S0266-3538(02)00195-1
  4. Gigliotti, M., Jacquemin, F. and Vautrin, A. (2004), "On the maximum curvatures of 0/90 plates under thermal stress", Compos. Struct., 68(2), 177-184. https://doi.org/10.1016/j.compstruct.2004.03.012
  5. Ito, T., Suganuma, T. and Wakashima, K. (2000), "A micromechanics based analysis for tailoring glass fiber reinforced thermoplastic laminates with near zero coefficients of thermal expansion", Compos. Sci. Technol., 60(9), 1851-1861. https://doi.org/10.1016/S0266-3538(00)00073-7
  6. Jenn, D. (1995), Radar and Laser Cross Section Engineering, American Institute Aeronautics and Astronautics Inc., Washington, D.C., USA.
  7. Jung, K., Chu, S. and Ahn, H. (2009), "Measurement and compensation of spring-back of a hybrid composite beam", J.Compos. Mater., 41(7), 851-864.
  8. Kaini, I., Weily. R. and Esselle, P. (2006), "A novel absorb/transmit FSS for secure indoor wireless networks with reduced multipath fading", IEEE microw, wirel. co.,. 16(6), 378-380. https://doi.org/10.1109/LMWC.2006.875589
  9. Kim, C. and Lee, G. (2009), "Improvement of bonding characteristics between the frequency selective surface and E-glass/epoxy composites for stealth radomes", J. Adhes. Sci. Technol., 23(2), 215-227. https://doi.org/10.1163/156856108X369570
  10. Kim, C., Chin, W., Lee, D. and Seo, I. (2006), "EM characteristics of the RAS composed of E-glass/epoxy composite and single dipole FSS element", Compos. Struct., 75(1-4), 601-609. https://doi.org/10.1016/j.compstruct.2006.04.085
  11. Kim, C., Lee, G., Seo, S. and Kim, H. (2008), "Low-observable radomes composed of composite sandwich constructions and frequency selective surfaces", Compos. Sci. Technol., 68(9), 2163-2170. https://doi.org/10.1016/j.compscitech.2008.03.016
  12. Lee, Y., Jeong, R., Hong, P., Lee, G., Chun, J. and Yook, G. (2011), "Simple design method of FSS radome analysis using equivalent circuit model", IEICE. Electron. Expr., 8(23), 2002-2009. https://doi.org/10.1587/elex.8.2002
  13. Liu, T., Cheng, F., Chu, Y. and Zhang, Y. (2007), "Absorbing properties of frequency selective surface absorbers with cross-shaped resistive patches", Mate. Design., 28(7), 2166-2171. https://doi.org/10.1016/j.matdes.2006.06.011
  14. Matous, K. and Dvorak, G. (2003), "Optimization of electromagnetic absorption in laminated composite plates", Trans. Magn., 39(3), 1827-1835. https://doi.org/10.1109/TMAG.2003.809861
  15. Mittra, R., Chan, C. and Cwik, T. (1998), "Techniques for analyzing frequency selective surfaces - a review", Proceedings of the IEEE 1988, Dec, 76(12), 1593-1615.
  16. Monacelli, B., Pryor, J., Munk, B., Kotter, D. and Boreman, G. (2005), "Infrared Frequency Selective Surface based on circuit-analog square loop design", IEEE T Antenn. Propag., 53(2), 745-752. https://doi.org/10.1109/TAP.2004.841290
  17. Munk, B. (2000), Frequency Selective Surfaces, Wiley, New York, NY, USA.
  18. Pinho, M., Gregori, M., Nunes, R. and Soares, B. (2002), "Performance of radar absorbing materials by waveguide measurements for X and Kuband frequencies", Eur. Polym. J., 38(11), 2321-2327. https://doi.org/10.1016/S0014-3057(02)00118-0
  19. Ressettos, J. and Shen, X. (1995), "On the axial and interfacial shear stresses due to thermal mismatch in hybrid composite sheets", Compos. Sci. Technol., 54(4), 417-422. https://doi.org/10.1016/0266-3538(95)00085-2
  20. Tretyakov, S. and Maslovski, S. (2003), "Thin absorbing structure for all incidence angles based on the use of a high-impedance surface", Microw. Opt. Technol. Lett,. 38(3), 175-178. https://doi.org/10.1002/mop.11006
  21. Vinoy, K. (1996), Radar Absorbing Materials from Theory to Design and Characterization, (1st Ed.), Kluwer Academic Publisher, Boston, MA, USA.

피인용 문헌

  1. Design of Active Frequency Selective Surface with Curved Composite Structures and Tunable Frequency Response vol.2017, 2017, https://doi.org/10.1155/2017/6307528
  2. Investigation of residual stresses of hybrid normal and high strength steel (HNHSS) welded box sections vol.33, pp.4, 2015, https://doi.org/10.12989/scs.2019.33.4.489
  3. Experimental and numerical prediction of the weakened zone of a ceramic bonded to a metal vol.8, pp.4, 2015, https://doi.org/10.12989/amr.2019.8.4.295