DOI QR코드

DOI QR Code

Experiments on locally dented conical shells under axial compression

  • Ghazijahani, Tohid Ghanbari (School of Engineering and ICT, University of Tasmania, Sandy Bay Campus) ;
  • Jiao, Hui (School of Engineering and ICT, University of Tasmania, Sandy Bay Campus) ;
  • Holloway, Damien (School of Engineering and ICT, University of Tasmania, Sandy Bay Campus)
  • 투고 : 2015.02.26
  • 심사 : 2015.05.28
  • 발행 : 2015.12.25

초록

Steel conical shells have long been used in various parts of different structures. Sensitivity to the initial geometrical imperfection has been one of the most significant issues on the stability of these structures, which has made them highly vulnerable to the buckling. Most attention has been devoted to structures under normal fabrication related imperfections. Notwithstanding, the challenges of large local imperfections - presented herein as dent-shaped imperfections - have not been a focus yet for these structures. This study aims to provide experimental data on the effect of such imperfections on the buckling capacity of these shells under axial compression. The results show changes in the buckling mode and the capacity for such damaged thin specimens as is outlined in this paper, with an average overall capacity reduction of 11%.

키워드

과제정보

연구 과제 주관 기관 : University of Tasmania

참고문헌

  1. Blachut, J. (2011), "On elastic-plastic buckling of cones", Thin-Wall. Struct., 49(1), 45-52. https://doi.org/10.1016/j.tws.2010.08.005
  2. Blachut, J. (2012), "Interactive plastic buckling of cones subjected to axial compression and external pressure", Ocean Eng., 48, 10-16. https://doi.org/10.1016/j.oceaneng.2012.03.018
  3. Blachut, J., Muc, A. and Rys, J. (2013), "Plastic buckling of cones subjected to axial compression and external pressure", J. Press. Vessel Technol., 135(1), 011205. https://doi.org/10.1115/1.4006903
  4. DIN 18800 (1990), Stahlbauten.Teil 4: Stabilitatsfalle, Schalenbeulen.
  5. ECCS EDR5 (2008), European Recommendations for steel construction, Buckling of shells, (5th Ed.), In: Rotter, J.M., Schmidt, H., Editors, European convention for constructional steelwork, Brussels, Belgium, 384 p.
  6. El-Sobky, H. and Singace, A. (1999), "An experiment on elastically compressed frusta", Thin-Wall. Struct., 33(4), 231-244. https://doi.org/10.1016/S0263-8231(98)00047-0
  7. EN1993-1-6 (2007), Eurocode 3: Design of steel structures, Part 1.6: General rules-Strength and stability of shell structures, Eurocode 3 Part 1.6, CEN, Brussels, Belgium.
  8. Fatemi, S.M., Showkati, H. and Maali, M. (2013), "Experiments on imperfect cylindrical shells under uniform external pressure", Thin-Wall. Struct., 65, 14-25. https://doi.org/10.1016/j.tws.2013.01.004
  9. Ghazijahani, T.G. and Showkati, H. (2011), "Experiments on conical shell reducers under uniform external pressure", J. Construct. Steel Res., 67(10), 1506-1515. https://doi.org/10.1016/j.jcsr.2011.03.024
  10. Ghanbari Ghazijahani, T. and Showkati, H. (2013a), "Experiments on cylindrical shells under pure bending and external pressure", J. Construct. Steel Res., 88, 109-122. https://doi.org/10.1016/j.jcsr.2013.04.009
  11. Ghanbari Ghazijahani, T. and Showkati, H. (2013b), "Locally imperfect conical shells under uniform external pressure", Strength Mater., 45(3), 369-377. https://doi.org/10.1007/s11223-013-9467-9
  12. Ghanbari Ghazijahani, T. and Zirakian, T. (2014), "Determination of buckling loads of conical shells using extrapolation techniques", Thin-Wall. Struct., 74, 292-299. https://doi.org/10.1016/j.tws.2013.09.003
  13. Ghanbari Ghazijahani, T., Jiao, H. and Holloway, D. (2014a), "Experimental study on damaged cylindrical shells under compression", Thin-Wall. Struct., 80, 13-21. https://doi.org/10.1016/j.tws.2014.02.029
  14. Ghanbari Ghazijahani, T., Jiao, H. and Holloway, D. (2014b), "Experiments on dented cylindrical shells under peripheral pressure", Thin-Wall. Struct., 84, 50-58. https://doi.org/10.1016/j.tws.2014.05.012
  15. Ghanbari Ghazijahani, T., Jiao, H. and Holloway, D. (2015a), "Fatigue tests of damaged tubes under flexural loading", Steel Compos. Struct., Int. J., 19(1), 223-236. https://doi.org/10.12989/scs.2015.19.1.223
  16. Ghanbari Ghazijahani, T., Jiao, H. and Holloway, D. (2015b), "Longitudinally stiffened corrugated cylindrical shells under uniform external pressure", J. Construct. Steel Res., 110, 191-199. https://doi.org/10.1016/j.jcsr.2015.02.016
  17. Ghanbari Ghazijahani, T., Jiao, H. and Holloway, D. (2015c), "Plastic buckling of dented steel circular tubes under axial compression: An experimental study", Thin-Wall. Struct., 92, 48-54. https://doi.org/10.1016/j.tws.2015.02.018
  18. Golzan, B. and Showkati, H. (2008), "Buckling of thin-walled conical shells under uniform external pressure", Thin-Wall. Struct., 46(5), 516-529. https://doi.org/10.1016/j.tws.2007.10.011
  19. Gupta, P. (2008), "A study on mode of collapse of varying wall thickness metallic frusta subjected to axial compression", Thin-Wall. Struct., 46(5), 561-571. https://doi.org/10.1016/j.tws.2007.10.005
  20. Gupta, N. and Abbas, H. (2000), "Axisymmetric axial crushing of thin frusta", Thin-Wall. Struct., 36(3), 169-179. https://doi.org/10.1016/S0263-8231(00)00003-3
  21. Gupta, N., Sheriff, N.M. and Velmurugan, R. (2006), "A study on buckling of thin conical frusta under axial loads", Thin-Wall. Struct., 44(9), 986-996. https://doi.org/10.1016/j.tws.2006.08.010
  22. Ifayefunmi, O.F. (2011), Combined Stability of Conical Shells, University of Liverpool, UK.
  23. Lackman, L. and Penzien, J. (1960), "Buckling of circular cones under axial compression", J. Appl. Mech., 27(3), 458-460. https://doi.org/10.1115/1.3644024
  24. Maali, M., Showkati, H. and Mahdi Fatemi, S. (2012), "Investigation of the buckling behavior of conical shells under weld-induced imperfections", Thin-Wall. Struct., 57, 13-24. https://doi.org/10.1016/j.tws.2012.04.003
  25. Niloufari, A., Showkati, H., Maali, M. and Mahdi Fatemi, S. (2014), "Experimental investigation on the effect of geometric imperfections on the buckling and post-buckling behavior of steel tanks under hydrostatic pressure", Thin-Wall. Struct., 74, 59-69. https://doi.org/10.1016/j.tws.2013.09.005
  26. Prasad, G. and Gupta, N. (2005), "An experimental study of deformation modes of domes and large-angled frusta at different rates of compression", Int. J. Impact Eng., 32(1), 400-415. https://doi.org/10.1016/j.ijimpeng.2004.12.001
  27. Seide, P. (1956), "Axisymmetric buckling of circular cones under axial compression", J. Appl. Mech., 23(4), 625-628.
  28. Sofiyev, A. (2011), "Influence of the initial imperfection on the non-linear buckling response of FGM truncated conical shells", Int. J. Mech. Sci., 53(9), 753-761. https://doi.org/10.1016/j.ijmecsci.2011.06.007
  29. Teng, J.-G. and Rotter, J.M. (2006), Buckling of Thin Metal Shells, CRC Press.
  30. Zhao, X. and Liew, K.M. (2011), "An element‐free analysis of mechanical and thermal buckling of functionally graded conical shell panels", Int. J. Numer. Method. Eng., 86(3), 269-285. https://doi.org/10.1002/nme.3059

피인용 문헌

  1. Effects of imperfection shapes on buckling of conical shells under compression vol.60, pp.3, 2016, https://doi.org/10.12989/sem.2016.60.3.365
  2. Dynamic analysis of a cylindrical boom based on Miura origami vol.28, pp.5, 2018, https://doi.org/10.12989/scs.2018.28.5.607
  3. A New Formulation for Predicting the Collision Damage of Steel Stiffened Cylinders Subjected to Dynamic Lateral Mass Impact vol.10, pp.11, 2015, https://doi.org/10.3390/app10113856
  4. Buckling of steel cylindrical hollow sections with large imperfections under compression vol.174, pp.3, 2015, https://doi.org/10.1680/jstbu.17.00181
  5. Collapse of cone-cylinder transitions having single load indentation imperfection subjected to axial compression vol.194, pp.no.pa, 2015, https://doi.org/10.1016/j.ijpvp.2021.104506
  6. Influence of multiple load indentation on the mechanical and material behaviour of steel cone-cylinder under axial compression vol.8, pp.12, 2021, https://doi.org/10.1088/2053-1591/ac3bfa