Structural Engineering and Mechanics

  • 제53권1호
  • /
  • Pages.147-158
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical study of buckling profile web stability

  • Taleb, Chems eddine (Faculty of Civil Engineering, University of Sciences and Technology HOUARI BOUMEDIENE) ;
  • Ammari, Fatiha (Faculty of Civil Engineering, University of Sciences and Technology HOUARI BOUMEDIENE) ;
  • Adman, Redouane (Faculty of Civil Engineering, University of Sciences and Technology HOUARI BOUMEDIENE)
  • 투고 : 2014.01.10
  • 심사 : 2014.10.09
  • 발행 : 2015.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

Elements used in steel structures may be considered as an assembly of number of thin flat walls. Local buckling of these members can limit the buckling capacity of axial load resistance or flexural strength. We can avoid a premature failure, caused by effects of local buckling, by limiting the value of the wall slenderness which depend on its critical buckling stress. According to Eurocode 3, the buckling stress is calculated for an internal wall assuming that the latter is a simply supported plate on its contour. This assumption considers, without further requirement, that the two orthogonal walls to this wall are sufficiently rigid to constitute fixed supports to it. In this paper, we focus on webs of steel profiles that are internal walls delimited by flanges profiles. The objective is to determine, for a given web, flanges dimensions from which the latter can be considered as simple support for this web.

키워드

참고문헌

  1. Bedair, O. (2009), "Analytical effective width equations for limit state design of thin plates under nonhomogeneous in-plane loading", Arch. Appl. Mech., 79, 1173-1189. https://doi.org/10.1007/s00419-009-0296-z
  2. Benyoucef, S., Mechab, I., Tounsi, A., Fekrar, A., AitAtmane, H. and Bedia, E.A. (2010), "Bending of thick functionally graded plates resting on winkler-pasternak elastic foundations", Mech. Compos. Mater., 46(4), 425-434. https://doi.org/10.1007/s11029-010-9159-5
  3. Bodaghi, M. and Saidi, A.R. (2010), "Stability analysis of functionally graded rectangular plates under nonlinearly varying in-plane loading resting on elastic foundation", Arch ApplMech., 81(6), 765-780.
  4. Bouiadjra, R.B, Bedia, E.A. and Tounsi, A. (2013), "Nonlinear thermal buckling behavior of functionally graded plates using an efficient sinusoidal shear deformation theory", Struct. Eng. Mech., 48, 547-567. https://doi.org/10.12989/sem.2013.48.4.547
  5. Bouazza, M., Tounsi, A., Bedia, E.A. and Megueni, A. (2010), "Thermoelastic stability analysis of functionally graded plates: an analytical approach", Comput. Mater. Sci., 49, 865-870. https://doi.org/10.1016/j.commatsci.2010.06.038
  6. Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013), "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., 14(1), 85-104. https://doi.org/10.12989/scs.2013.14.1.085
  7. Bourada, M., Tounsi, A., Houari, M.S.A. and Bedia, E.A. (2012), "A new four-variable refined plate theory for thermal buckling analysis of functionally graded sandwich plates", J. Sandw. Struct. Mater., 14, 5-33. https://doi.org/10.1177/1099636211426386
  8. Bousahla, A.A., Houari, M.S., Tounsi, A. and Bedia, E.A. (2014), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", Int. J. Comput. Method., 6, 1-18.
  9. Courbon, J. (1980), "Plaques minces elastiques", Techniques de l'ingenieur.
  10. El Meiche, N., Tounsi, A., Ziane, N., Mechab, I. and Bedia, E.A. (2011), "A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate", Int. J. Mech. Sci., 53(4), 237-247. https://doi.org/10.1016/j.ijmecsci.2011.01.004
  11. Estanave, E. (1900), "Contribution a l'etude de l'equilibre elastique d'une plaque rectangulaire mince", ENS, Tome 17, 295-358.
  12. EUROCODE 3 (1999), "Design of steel structures", AFNOR.
  13. Euronormes: European I beams (Euronorm 19-57), European standard beams (DIN 1025-1: 1963), European wide flange beams (Euronorm 53-62).
  14. He, W.Y. and Ren, W.X. (2012), "Trigonometric wavelet-based method for elastic thin plate analysis", Appl. Math. Model., 37, 1607-1617.
  15. Jubran, J.S. and Cofer, W.F. (1991), "ultimate strength analysis of structural components using the continuum damage mechanics approach", Comput. Struct., 39(6), 741-752. https://doi.org/10.1016/0045-7949(91)90218-B
  16. Tian, Y.P. and Fu, Y.M. (2008), "Elasto-plastic postbuckling of damaged orthotropic plates", Appl. Math. Mech., English Edition, 29(7), 841-853. https://doi.org/10.1007/s10483-008-0702-y
  17. Timoshenko ,S.P. (1963), "Theory of elastic stability", International Student Edition.
  18. Tounsi, A., Houari, M.S.A., Benyoucef, S. and Bedia, E.A. (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aerosp. Sci. Tech., 24, 209-220. https://doi.org/10.1016/j.ast.2011.11.009
  19. Zhulin, Z. (1998), "Ultimate strength of postbuckling for simply supported rectangular composite thin plates under compression", Appl. Math. Mech., 19(4), 391-397. https://doi.org/10.1007/BF02457544

피인용 문헌

  1. A branch-switching procedure for analysing instability of steel structures subjected to fire vol.67, pp.6, 2015, https://doi.org/10.12989/sem.2018.67.6.629