DOI QR코드

DOI QR Code

Impact behavior on temperature effect of nano composite materials

온도변화에 따른 나노 복합재료의 충격거동

  • KIM, Hyung-Jin (Department of Mechanical System Engineering, Gyeongsang National University) ;
  • LEE, Jung-Kyu (Department of Control and Mechanical Engineering, Graduate School, Pukyong National University) ;
  • KOH, Sung Wi (Department of Mechanical System Engineering, Pukyong National University)
  • 김형진 (경상대학교 기계시스템공학과) ;
  • 이정규 (부경대학교 대학원 제어기계공학과) ;
  • 고성위 (부경대학교 기계시스템공학과)
  • Received : 2015.09.17
  • Accepted : 2015.11.05
  • Published : 2015.11.30

Abstract

In this study, the effect of temperature effect of the rubber matrix filled with nano sized silica particles composites with silica volume fraction of 19-25% was investigated by the Charpy impact test. The Charpy impact test was conducted in the temperature range from $-40^{\circ}C$ to $0^{\circ}C$. The critical energy release rate GIC of the rubber matrix composites filled with nano sized silica particles was considerably affected by temperature and it was shown that the maximum value was appeared at higher temperature between temperature tested and it was shown that the value of GIC increases as temperature tested increases. The major fracture mechanisms were matrix deformation, silica particle debonding and delamination, microcrack between particles and matrix, and/or pull out between particles and matrix which is ascertained by SEM photographs of Charpy impact surfaces fracture.

Keywords

References

  1. Bonner M, Elfering B and Ward IM. 2014. The mechanical properties of high stiffness hot-compacted polypropylene: a new development. J Mater Sci 49, 1606-1611. (DOI: 10.1007/s10853-013-7843-2).
  2. Chen LS, Mai YW and Cotterell B. 1989. Impact fracture energy of mineral-filled polypropylene. Polymer Eng Sci 29 (8), 505-512. https://doi.org/10.1002/pen.760290804
  3. Kim BK and Koh SW. 2009. Impact fracture behavior on effect of temperature of glass fiber/polyuretane composites. J Kor Soc Fish Tech 45 (3), 188-193. (DOI:10.3796/KSFT.2009.45.3.188)
  4. Kwon DJ, Wang ZJ, Kim JJ, Jang KW and Park JM. 2013 Improvement of mechanical and interfacial properties of carbon fiber/epoxy composites by adding nano SiC fillers. J Adhesion Interface 14 (2), 75-81. https://doi.org/10.17702/jai.2013.14.2.075
  5. Jang SH. 2013. A study on morphology and mechanical properties of biodegradable polymer nanocomposites. Clean Tech 19(4), 401-409. (DOI: 10.7464 /ksct.2013.19.4.401) https://doi.org/10.7464/ksct.2013.19.4.401
  6. Jung WY and Weon JL. 2013. Impact performance and toughening mechanisms of toughness-tailored polypropylene impact copolymer. J Mater Sci 48, 1275-1282. (DOI: 10.1007/s10853-012-6870-8).
  7. Lee JK and Koh SW. 2015. Impact fracture behavior on particle volume fraction of nano silica composite materials. J Kor Soc Fish Tech 51(3), 454-460. (doi:10.3796/KSFT.2015.51.3.454).
  8. Munro M and Lai CPZ. 1988. The elevated temperature dependence of fracture energy mechanisms of hybrid carbon-glass fiber reinforced composites. J Mater Sci 23, 3129-3138. https://doi.org/10.1007/BF00551284
  9. Plati E and Williams JG. 1975. The determination of the fracture parameters of polymers in impact. Polymers Eng Sci 15, 470-477. https://doi.org/10.1002/pen.760150611
  10. Salehi Vaziri H, Abadyan M, Nouri M, Omaraei IA, Sadredini Z and Ebrahimnia M. 2011. Investigation of the fracture mechanism and mechanical properties of polystyrene/silica nanocomposite in various silica contents. J Mater Sci 46, 5628- 5638. (DOI: 10.1007/s10853-011-5513-9).
  11. Tam WY, Cheung TYH and Li RKY. 2000. Impact properties of glass fibre/impact modifier/polypropylene hybrid composites. J Mater Sci 35, 1525-1533. https://doi.org/10.1023/A:1004701501431