DOI QR코드

DOI QR Code

자동차용 가스 스프링의 반력 특성에 관한 연구

A Study on the Reaction Force Characteristics of the Gas Spring for the Automotive

  • Lee, Choon Tae (Department of Automotive & Mechanical Engineering, Silla University)
  • 투고 : 2015.10.12
  • 심사 : 2015.11.05
  • 발행 : 2015.12.01

초록

A gas spring provides support force for lifting, positioning, lowering, and counterbalancing weights. It offers a wide range of reaction force with a flat force characteristic, simple mounting, compact size, speed controlled damping, and cushioned end motion. The most common usage is as a support on a horizontally hinged automotive tail gate. However, its versatility and ease of use has been applied in many other industrial applications ranging from office equipment to off-road vehicles. The cylinder of a gas spring is filled with compressed nitrogen gas, which is applied with equal pressure on both sides of the piston. The surface area of the rod side of the piston is smaller than the opposite side, producing a pushing force. The magnitude of the reaction force is determined by the cross-sectional area of the piston rod and the internal pressure inside the cylinder. The reaction force is influenced by many design parameters such as initial chamber volume, diameter ratio, etc. In this paper, we investigated the reaction force characteristics and carried out parameter sensitivity analysis for the design parameters of a gas spring.

키워드

참고문헌

  1. Y. B. Kim, "A Study on the Optimal Design of Gas Spring for Vehicle", Journal of the KSPE, Vol.15, No.11, pp.39-45, 1998.
  2. C. H. Kim, H. M. Kim, G. S. Choi, H. I. Jung, Y. H. Jin and C. W. Lim, "A Study of Numerical Analysis for Gas Spring Operate", Proceedings of KSAE, KSAE04-Y0019, pp.146-151, 2004.
  3. K. H. Lee, "On the Computation of Gas Flows and Convective Heat Transfer in Gas Springs", Theses of Wonkwang University, Vol.30, No.2, pp.317-334, 1995.
  4. P. D. S. Oliveira and S. N. Vannucci, "Gas Spring with Temperature Compensation", SAE Technical Paper 2000-01-3170, 2000.
  5. E. C. Macia and J. X. Valls, "Determine of Flow Rate Characteristics of Pneumatic Fluid Power Valves", National Fluid Power Association Technical Paper Series N92-25.2, 1992.
  6. C. W. Park and H. Y. Kim, "A Study on the Auto-mobile Gas Spring Structural Analysis Using of Bimetal", Journal of the Korean Society of Manufacturing Technology Engineers, Vol.22, No.1, pp.131-137, 2013. https://doi.org/10.7735/ksmte.2013.22.1.131
  7. Y. Tassay, T. Wu, J. Movellan and E. Todoro, "Modeling and Identification of Pneumatic Actuators", IEEE International Conference on Mechatronics and Automation (ICMA), pp. 437-443, 2013.
  8. V. Blagojevic and M. Stojiljkovic, "Mathematical and Simulink Model of the Pneumatic System with Bridging of the Dual Action Cylinder Chambers", Journal of the Mechanical Engineering - FACTA University, Vol.5, No.1, pp.23-31, 2007.
  9. T. J. Um, "Optimization of design Parameters of a Pneumatic System", Journal of the korea fluid power systems society, No.2, Vol.4, pp.56-61, 2005.

피인용 문헌

  1. 차량용 가스스프링의 최적설계에 관한 연구 vol.14, pp.4, 2015, https://doi.org/10.7839/ksfc.2017.14.4.045