참고문헌
- P. Pastila, V. Helanti, A. P. Nikkila, and T. Mantyla, "Environmental Effects on Micro Structure and Strength of SiC based Hot Gas Filters," J. Eur. Ceram. Soc., 21 [9] 1261-68 (2001). https://doi.org/10.1016/S0955-2219(00)00326-5
- J. Y. Won, S. R. Kim, Y. H. Kim, D. K. Shin, Y. J. Lee, and W. T. Kwon, "Preparation of Porous Silicon Carbide Foam Using a Polymer Replica Method(in Korean)," J. Environ. Therm. Eng., 11 [1] 6-12 (2014).
- Y. Jiao, C. Jiang, Z. Yang, J. Liu, and J. Zhang, "Synthesis of Highly Accessible ZSM-5 Coatings on SiC Foam Support," Microporous Mesoporous Mater., 181 201-07 (2013). https://doi.org/10.1016/j.micromeso.2013.07.013
- J. H. Eom, Y. W. Kim, and I. H. Song, "Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane(in Korean)," J. Korean Ceram. Soc., 49 [6] 625-30 (2012). https://doi.org/10.4191/kcers.2012.49.6.625
- S. R. Kim, W. T. Kwon, Y. H. Kim, J. I. Kim, Y. J. Lee, H. J. Lee, and S. C. Oh, "Additive Effects on Sintering of Si/SiC Mixtures(in Korean)," Kor. J. Mater. Res., 22 [22] 701-05 (2012). https://doi.org/10.3740/MRSK.2012.22.12.701
- A. R. Studart, U. T. Gonzenbach, E. Tervoort, and L. J. Gauckler, "Processing Routes to Macroporous Ceramics : A Review," J. Am. Ceram. Soc., 89 [6] 1771-89 (2006). https://doi.org/10.1111/j.1551-2916.2006.01044.x
- S. Ahmad, M. A. Latif, H. Taib, and A. F. Ismail, "Short Review : Ceramic Fabrication Techniques for Wastewater Treatment Application," Adv. Mat. Res., 795 5-8 (2013). https://doi.org/10.4028/www.scientific.net/AMR.795.5
- T. Ota, M. Takahashi, T. Hibi, M. Ozawa, S. Suzuki, Y. Hikichi, and H. Suzuki, "Biomimetic Process for Producing SiC ''Wood''," J. Am. Ceram. Soc., 78 [12] 3409-11 (1995). https://doi.org/10.1111/j.1151-2916.1995.tb07988.x
- P. Sepulveda, "Gelcasting Foams for Porous Ceramics," Am. Ceram. Soc. Bull., 76 [10] 61-65 (1997).
- I. Fukuura and T. Asano, "Fabrication and Properties of Some Oxide Ceramics: Alumina, Mullite and Zirconia," 165-74 in Fine Ceramics, Ed. by S. Saito. Elsevier, New York, 1985.
- X. W. Zhu, D. L. Jiang, S. H. Tan, and Z. Zhang, "Improvement in the Strut Thickness of Reticulated Porous Ceramics," J. Am. Ceram. Soc., 84 [7] 1654-56 (2001).
- M. R. Nangrejo and M. J. Edirisinghe, "Porosity and Strength of Silicon Carbide Foams Prepared Using Preceramic Polymer," J. Porous Mater., 9 [2] 131-40 (2002). https://doi.org/10.1023/A:1020834509443
- H. Wang, X. Li, J. Yu, and D. Kim, "Fabrication and Characterization of Ordered Macroporous PMS-derived SiC from a Sacrificial Template Method," J. Mater. Chem., 14 1383-86 (2004). https://doi.org/10.1039/b313405a
- J. H. Eom, Y. W. Kim, and S. Raju, "Processing and Properties of Macroporous Silicon Carbide Ceramics : A review," J. Asian. Ceram. Soc., 1 220-42 (2013). https://doi.org/10.1016/j.jascer.2013.07.003
- J. Won, Y. J. Lee, J. I. Kim, Y. Kim, S. R. Kim, H. J. Lee, T. K. Ko, M. Lee, and W. T. Kwon, "A Study on the Pore Structure Control with Heat Treatment Conditions of Waste Tire Carbon Residue," J. Kor. Inst. Res. Recycl., 22 [2] 1-7 (2013).
- J. G. Li and H. Hausner, "Wetting and Adhesion in Liquid Silicon/Ceramic Systems," Mater. Lett., 14 329-32 (1992). https://doi.org/10.1016/0167-577X(92)90047-N
- Z. Yuan, W. Huang, and K. Mukai "Wettability and Reactivity of Molten Silicon with Various Substrates," Appl. Phys. A, Mater., 78 [4] 617-22 (2004). https://doi.org/10.1007/s00339-002-2001-8
- Z. Zhang, F. Wang, X. Yu, Y. Wang, and Y. Yan, "Porous Silicon Carbide Ceramics Produced by a Carbon Foam Derived from Mixtures of Mesophase Pitch and Si Particles," J. Am. Ceram. Soc., 92 [1] 260-63 (2009). https://doi.org/10.1111/j.1551-2916.2008.02842.x
피인용 문헌
- Effect of Alkaline-Earth Oxide Additives on Flexural Strength of Clay-Based Membrane Supports vol.52, pp.3, 2015, https://doi.org/10.4191/kcers.2015.52.3.180
- Oxidation Resistance, Compressive Strength and Thermal Shock Resistance of SiC Ceramics Prepared by Two Processing Routes vol.12, pp.4, 2014, https://doi.org/10.1007/s12633-019-00147-z
- Effect of the processing conditions of reticulated porous alumina on the compressive strength vol.58, pp.4, 2021, https://doi.org/10.1007/s43207-021-00128-2