Abstract
The shape of an impeller splitter for a dual-inlet centrifugal blower was optimized to enhance the blower performance. Two design variable, the normalized chord and pitch of a splitter, were used to evaluate the blower performance and internal flow fields based on the three-dimensional flow analysis. The blower performance obtained using this numerical simulation had a maximum error of 4 percent compared to that in an experiment at the design flow condition. The shape optimization of the splitter successfully increased the blower efficiency and pressure by 3.65 and 1.14 percent compared to the reference values. The blower performance was increased by reducing the flow separation near the blade suction surface by optimizing the shape of the splitter, which produced a pressure increase at the outlet of the volute casing.
본 연구에서는 양흡입 원심블로어의 성능향상을 위하여 임펠러 스플리터의 형상 최적화 연구를 수행하였다. 두 개의 스플리터 형상 설계 변수(스플리터 코드 및 피치)를 선정하여 블로어 성능 및 내부 유동장 특성을 평가하였다. 수치해석에 의한 블로어 성능은 설계유량 조건에서 실험결과와 최대 4 % 이내로 잘 일치하였다. 스플리터 형상 최적화를 통하여 설계조건에서의 블로어 효율 및 압력은 기준 블로어 보다 3.65 % 및 1.14 % 각각 향상되었다. 스플리터 최적설계로 임펠러 날개 부압면의 유동박리를 억제시켜 익간 저속 유동에 의한 압력손실을 줄임으로써 블로어 전체의 성능이 향상되었다. 익간 내부유동 균일화는 임펠러 출구속도 분포에도 영향을 주어 볼류트케이싱 출구압력도 향상되었다.