Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Seismic Performance Test of TSC Composit Beam to CRC Composit Column Connections

TSC 합성보와 CRC 합성기둥의 내진접합부 성능실험

  • Received : 2014.07.04
  • Accepted : 2014.11.06
  • Published : 2014.11.30
⟨ Previous Next ⟩

Abstract

The Centrifugal Reinforced Concrete(CRC) column developed by SEN Engineering is a method utilizing PHC(Prestressed High Strength Pre-Stressed Concrete) piles as columns. The CRC column is able to obtain the maximum capacity as for a reinforced concrete column due to its manufacturing method using centrifugal force to produce high strength concrete same for PHC and inserting a reinforced cage instead of a pre-stressed wire decreasing compressive strength in PHC. This expeditious and economical way to produce concrete of strength more than 80MPa by centrifugal casting makes CRC columns be easily and quickly applied to the construction site than PC(Precast Concrete). CRC column is not only improve applicability but it also enhances constructability because its buckling capacity higher than H-section column leads to increase the depth of penetration. If a required service load is higher than the capacity of the CRC column, it can be reinforced by additional concrete casting with re-bars in the site to obtain sufficient strength. The seismic resistance performance of the CRC column-to-TSC beam connection is previously demonstrated in accordance with KBC 2009 by experimental test, and the real scale test of the connection is conducted in this study. As a result, the seismic resistance performance of the connection meets the requirements of KBC2009; therefore, the CRC column-to-TSC beam connection can be used as IMF or SMF.

Keywords

Acknowledgement

Supported by : 국토교통과학기술진흥원

References

  1. 김성진, 김성배, 이창남, 목진오, 허건영, 이병락, 김상섭, PHC 파일을 기둥재로 적용하기 위한 실험적 연구, 대한건축학회학술발표대회 논문집, 27권, 1호, p.p. 127-130, 2007
  2. 김성배, 김성진, 김상섭, PHC 파일에 부착한 밴드플레이트의 부착강도에 관한 연구, 대한건축학회논문집 구조계, 25권, 2호, p.p. 29-36, 2009
  3. 황현종, 박홍근, 이철호, 박창희, 이창남, 김형섭, 김성배, 콘크리트채움 U형 강재보 - 콘크리트 기둥 접합부의 내진성능, 한국강구조학회논문집, 23권, 1호, p.p. 83-97, 2011
  4. 정재천, 이창남, 이승환, 김형섭, 원심력을 이용한 사각형 CRC 합성 기둥의 휨 및 압축성능 평가, 대한건축학회 추계학술 발표대회논문집, 33권, 2호, p.p. 527-528, 2013
  5. 대한건축학회(2009) 건축구조설계기준 및 해설(KBC2009) 기문당
  6. 김상섭, 김상모, 김성배, 서동기, 김규석, 단순지지 T형 합성보의 휨거동에 관한 실험적 연구, 한국강구조학회 논문집, 16권, 2호, p.p. 225-233, 2004
  7. 김성배, 이창남, 김상섭, 단순지지 병목형 TSC 합성보의 휨 성능에 관한 실험적 연구, 대한건축학회논문집 구조계, 22권, 1호, p.p. 11-17, 2006
  8. T. Paulay and M.J.N. Priestley, Seismic design of reinforced concrete and masonry buildings by Wiley, New York, 1992, 744pp