DOI QR코드

DOI QR Code

수두손실률에 의한 방조제 침투류 감시 및 해석 기법 개발

Development of Seepage Monitoring and Analysis Method with the Hydraulic Head Loss Rate in Sea Dike

  • Eam, Sung Hoon (Major of Rural Construction Engineering, Kongju National University) ;
  • Heo, Gun (Rural Research Institute, Korea Rural Community Corporation)
  • 투고 : 2014.08.19
  • 심사 : 2014.10.24
  • 발행 : 2014.11.30

초록

In this study the pore water pressures were measured in sea dike constructed with the sand dredged in the sea, and they were analyzed with the hydraulic head loss rate to estimate quantitatively the state of blocking seepage in the sea dike embankment. Blocking state was expressed as the number between 0 and 1. the number of 1 means the state of perfectly blocking seepage and the number of 0 means the state of sea water being passing free. The deeper the installed position was the lower the hydraulic head loss rate was and the longer the seepage path length was the higher the hydraulic head loss rate was. The estimated R-squareds were close to 1, which means that the embankment was steady state without movement of soil particles.

키워드

참고문헌

  1. Closson, D., and N. A. Karaki, 2014. Dikes stability monitoring versus sinkholes and subsidence, dead sea region, jordan, Ch. 10. In Land Applications of Radar Remote Sensing, ed. F. Holecz, P. Pasquali, N. Milisavljevic and D. Closson, : 281-307. InTech. under CC BY 3.0 License.
  2. Eam, S.H. 2013. The analysis of tidal effect on stress-strain behavior in the boundary surface of sea dike embankment. Journal of the Korean Society of Agricultural Engineers 55(2): 1-8 (in Korean). https://doi.org/10.5389/KSAE.2013.55.2.001
  3. Eam, S. H., B. Y. Kang, K. W. Kim, J. H. Koo, S. I. Kang, H. Y. Cha, J. H. Jung, J. H. Cho, and K. S. Kim, 2010a. Development of the seepage flow monitoring method by the hydraulic head loss rate. Journal of the Korean Geotechnical Society 26(5): 37-48 (in Korean).
  4. Eam, S. H., C. Y. Yoon, S. P. Kim, and J. Heo, 2010b. Development of the seepage flow monitoring method by the hydraulic head loss rate on sea dike. In KGJ Fall National Conference, : 60-68. Gyoenghi, Korea (in Korean).
  5. Hanssen, R. F. and F. J. Van Leijen. 2008. Monitoring deformation of water defense structures using satellite radar interferometry. In 13th FIG Symposium on Deformation Measurement and Analysis : 1-7.
  6. Huang, M., and J. Liu, 2009. Monitoring and analysis of Shanghai Pudong seawall performance. Journal of Performance of Constructed Facilities 23(6): 399-405. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000057
  7. Mansur, C. I., and S. G. Durrett, 2002. Dewatering cofferdam for construction of Olmsted Locks. Journal of Geotechnical and Geoenvironmental Engineering ASCE 128(6): 496-510. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:6(496)
  8. Miura, K., C. Supachawarote, N. Phien-Wej, and D. G. Lin, 2001. Boiling resistant design of cofferdams regarding the 3-D effects of seepage. In Proc. of the 14th ICSMGE Istanbul, 3 : 2151-2154.
  9. Naveed, K. B., and R. Jr. Richards, 1975. Photoelastic analysis of a cofferdam. Journal of the Geotechnical Engineering ASCE 101(GT2): 129-145.
  10. Schroeder, W. L., and J. K. Maitland, 1979. Cellular bulkheads and cofferdams. Journal of the Geotechnical Engineering ASCE 105(.GT7): 823-837.

피인용 문헌

  1. The Estimation of Seepage Blocking State with the Normalized Hydraulic Head Loss Rate at Each Seepage Segment in Sea Dike Embankment vol.56, pp.6, 2014, https://doi.org/10.5389/KSAE.2014.56.6.159