Advances in concrete construction

  • 제2권3호
  • /
  • Pages.193-207
  • /
  • 2014
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental investigation on durability performance of rubberized concrete

  • 투고 : 2014.02.24
  • 심사 : 2014.04.03
  • 발행 : 2014.11.27
⟨ 이전 논문 다음 논문 ⟩

초록

The study presented herein aims to investigate the durability related properties of rubberized concrete. Two types of waste scrap tire rubber were used as fine and coarse aggregate, respectively. The rubber was replaced with aggregate by three crumb rubber and tire chips levels of 5, 15, and 25% for the rubberized concrete productions. In order to improve the transport properties and corrosion resistance of rubberized concretes, SF was replaced with cement at 10% replacement level by weight of total binder content. The transport properties of the rubberized concretes were investigated through water absorption, gas permeability, and water permeability tests. The corrosion behavior of reinforcing bars embedded in plain and silica fume based rubberized concretes was investigated by linear polarization resistance (LPR) test. The results indicated that the utilization of SF in the rubberized concrete production enhanced the corrosion behavior and decreased corrosion current density values. Moreover, the reduction in the water and gas permeability coefficients was observed by the incorporation of SF in plain and especially rubberized concretes.

키워드

참고문헌

  1. Abu Bakar, B.H., Akil, H.M. and Ismail, H. (2013), "Experimental and numerical investigations of the influence of reducing cement by adding waste powder rubber on the impact behavior of concrete", Comput. Concr., 11(1), 63-73. https://doi.org/10.12989/cac.2013.11.1.063
  2. Al-Amoudi, O.S.B., Maslehuddin, M., Lashari, A.N. and Almusallam A.A. (2003), "Effectiveness of corrosion inhibitors in contaminated concrete", Cement Concrete Compos., 25, 439-449. https://doi.org/10.1016/S0958-9465(02)00084-7
  3. Alexander, M.G. and Magee, B.J. (1999), "Durability performance of concrete containing condensed silica fume", Cement Concrete Res., 29, 917-922. https://doi.org/10.1016/S0008-8846(99)00064-2
  4. Ali, N.A., Amos, A.D. and Roberts, M. (1993) "Use of ground rubber tyres in portland cement concrete", Proceeding of the International Conference: Concrete 2000—Economic and Durable Construction through Excellence, University of Dundee, Scotland, UK, 1993.
  5. Al-Khaja, W.A. (1994), "Strength and time-dependent deformations of silica fume concrete for use in Bahrain", Construct. Build. Mater., 8, 169-172. https://doi.org/10.1016/S0950-0618(09)90030-7
  6. Andrade, C. and Alonso, C. (2001), "On-site measurements of corrosion rate of reinforcements", Constr. Build. Mater., 15,141-5. https://doi.org/10.1016/S0950-0618(00)00063-5
  7. Andrade, C., Alonso, C. and Gonzalez, J.A. (1990), "An initial effort to use corrosion rate measurements for estimating rebar durability", In: Berke, N.S., Chaker, V. and Whiting, D. editors, Corrosion rates of steel in concrete. ASTM STP 1065, Philadelphia: American Society for Testing and Materials.
  8. ASTM C642-06 (2006), Standard test method for density, absorption, and voids in hardened concrete. Annual Book of ASTM Standards.
  9. Eldin, N.N. and Senouci, A.B. (1993a), "Rubber tire particles as concrete aggregate", J. Mater. Civ. Eng. ASCE, 5(4),478-496. https://doi.org/10.1061/(ASCE)0899-1561(1993)5:4(478)
  10. Eldin, N.N. and Senouci, A.B. (1993b), "Observations on rubberized concrete behavior", Cement Concr. Aggr., 15(1), 74-84.
  11. Eldin, N.N. and Senouci, A.B. (1994), "Measurement and prediction of the strength of rubberized concrete", Cement Concrete Compos., 16, 287-298. https://doi.org/10.1016/0958-9465(94)90041-8
  12. Feldman, R.F. and Huang, C.Y. (1985), "Properties of portland cement silica fume paste: II. Mechanical properties", Cement Concrete Res., 15(6), 943-952. https://doi.org/10.1016/0008-8846(85)90083-3
  13. Gesoglu, M. and Guneyisi, E. (2007), "Strength development and chloride penetration in rubberized concretes with and without silica fume", Mater. Struct., 40, 953-964 https://doi.org/10.1617/s11527-007-9279-0
  14. Gesoglu, M. and Guneyisi, E. (2011), "Permeability properties of self-compacting rubberized concretes", Construct. Build. Mater., 25, 3319-3326. https://doi.org/10.1016/j.conbuildmat.2011.03.021
  15. Guneyisi, E., Gesoglu, M. and Ozturan, T. (2004), "Properties of rubberized concretes containing silica fume", Cement Concrete Res., 34, 2309-2317. https://doi.org/10.1016/j.cemconres.2004.04.005
  16. Inthata, S. and Cheerarot, R. (2014), "Chloride penetration resistance of concrete containing ground fly ash, bottom ash and rice husk ash, Comput. Concr., DOI: 10.12989/cac.2014.13.1.017.
  17. Ismail, M. and Ohtsu, M. (2006), "Corrosion rates of steel in concrete", Cement Concrete Res., 16,771-781.
  18. Issa, C.A. and Salem, G. (2013), "Utilization of recycled crumb rubber as fine aggregates in concrete mix design", Construct. Build. Mater., 42, 48-52. https://doi.org/10.1016/j.conbuildmat.2012.12.054
  19. Kayali, O.A. and Zhu, B. (2005), "Corrosion performance of medium-strength and silica fume high-strength reinforced concrete in a chloride solution", Cement Concrete Compos., 27,117-124. https://doi.org/10.1016/j.cemconcomp.2004.02.040
  20. Khatip, J.M. and Clay, R.M. (2004), "Absorption characteristics of metakaolin concrete", Cement Concrete Res., 34, 19-29. https://doi.org/10.1016/S0008-8846(03)00188-1
  21. Khatip, Z.K. and Bayomy, F.M. (1999), "Rubberized Portland cement concrete", J Mater Civil Eng ASCE, 11(3), 206-213. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:3(206)
  22. Lee, B.I., Burnett, L., Miller, T., Postage, B. and Cuneo, J. (1993), "Tyre rubber cement matrix composites", J. Mater. Sci. Lett., 12(13), 967-968. https://doi.org/10.1007/BF00420187
  23. Li, Z., Li, F. and Li, J.S.L. (1998), "Properties of concrete incorporating rubber tyre particles", Mag. Concr. Res., 50(4), 297-304. https://doi.org/10.1680/macr.1998.50.4.297
  24. Maslehuddin, M. and Al-Amoudi O.S.B. (1992), "Corrosion of reinforcing steel in concrete: its monitoring and prevention", Preprint, Symposium on Corrosion and its Control, King Saud University, Riyadh.
  25. Mehta, P.K. and Gjorv, O.E. (1982), "Properties of portland cement concrete containing fly ash and condensed silica fume", Cement Concrete Res., 12(5), 587-595. https://doi.org/10.1016/0008-8846(82)90019-9
  26. Mindess S (1994), Material Selection, Proportioning, and Quality Control, High Performance Concretes and Applications, Edward Arnold, London, England.
  27. Nili, M. and Afroughsabet, V. (2012), "Property assessment of steel-fibre reinforced concrete made with silica fume", Construct. Build. Mater., 28,664-669. https://doi.org/10.1016/j.conbuildmat.2011.10.027
  28. Parande, A.K. (2013), "Role of ingredients for high strength and high performance concrete - a review", Adv. Concrete Construct., 1(2), 151-162. https://doi.org/10.12989/acc.2013.01.2.151
  29. Raghavan, D., Huynh, H. and Ferraris, C.F. (1998), "Workability, mechanical properties, and chemical stability of a recycled tyre rubber filled cementitious composite", J. Mater. Sci., 33, 1745-1752. https://doi.org/10.1023/A:1004372414475
  30. Rahman, M.M., Usman, M. and Al-Ghalib, A.A. (2012), "Fundamental properties of rubber modified selfcompacting concrete", Construct. Build. Mater., 36, 630-637. https://doi.org/10.1016/j.conbuildmat.2012.04.116
  31. Rebeiz, K.S., Fowler, D.W. and Paul, D.R. (1992), "Polymer concrete and polymer mortar using resins based on recycled polyethylene terephthalate", J.Appl. Polym. Sci., 44(9), 1649-1655. https://doi.org/10.1002/app.1992.070440919
  32. Rebeiz, K.S., Serhal, S. and Fowler, D.W. (1993), "Shear behavior of steel reinforced polymer concrete using recycled plastic", ACI Struct. J., 90(6), 675-682.
  33. Rebeiz, K.S., Yang, S. and Fowler, D.W. (1994), "Polymer mortar composites made with recycled plastics", ACI Mater. J., 91(3), 313-319.
  34. RILEM TC 116-PCD (1999), Permeability of concrete as a criterion of its durability, Mater. Struct., 32, 174-179. https://doi.org/10.1007/BF02481510
  35. Rodriguez, P., Ramirez, E. and Honzalez, J.A. (1994), "Methods for studying corrosion in reinforced concrete", Mag. Concr. Res., 46, 81-90. https://doi.org/10.1680/macr.1994.46.167.81
  36. Rostami, H., Lepore, J., Silverstrim, T. and Zandi, I. (1993) "Use of recycled rubber tyres in concrete", Proceeding of the International Conference: Concrete 2000-Economic and Durable Construction through Excellence, University of Dundee, Scotland, UK.
  37. Savas, B.Z., Ahmad, S. and Fedroff, D. (1996), "Freeze-thaw durability of concrete with ground waste tire rubber", Transportation Research Board, Washington, DC.
  38. Segre, N. and Joekes, I. (2000), "Use of tire rubber particles and addition to cement paste", Cement Concrete Res., 30, 1421-1425. https://doi.org/10.1016/S0008-8846(00)00373-2
  39. Siddique, R. and Naik, T.R. (2004), "Properties of concrete containing scrap-tire rubber-an overview", Waste Manag., 24,563-569. https://doi.org/10.1016/j.wasman.2004.01.006
  40. Soroushian, P., Plasencia, J. and Ravanbakhsh, S. (2003), "Assessment of reinforcing effects of recycled plastic and paper in concrete", ACI Mater. J., 100(3), 203-207.
  41. Stern, M. and Geary, A.L. (1957), "A theoretical analysis of the slope of the polarization curves", J Electrochem. Soc., 104, 56-63. https://doi.org/10.1149/1.2428496
  42. Sukontasukkul, P. and Chaikaew, C. (2006), "Properties of concrete pedestrian block mixed with crumb rubber", Construct. Build. Mater., 20,450-457. https://doi.org/10.1016/j.conbuildmat.2005.01.040
  43. Topcu, I.B. (1995), "The properties of rubberized concretes", Cement Concrete Res., 25(2), 304-310. https://doi.org/10.1016/0008-8846(95)00014-3
  44. Topcu, I.B. (1997), "Assesment of the brittleness index of rubberized concrete", Cement Concrete Res., 27(2), 177-183. https://doi.org/10.1016/S0008-8846(96)00199-8
  45. Topcu, I.B. and Avcular, N. (1997), "Collosion behaviours of rubberrized concrete", Cement Concrete Res., 27(12), 1893-1898. https://doi.org/10.1016/S0008-8846(97)00204-4
  46. Toutanji, H.A. (1996), "The use rubber tire particles in concrete to replace mineral aggregates", Cement Concrete Compos., 18,135-139.
  47. TS708 (2010), Celik - betonarme icin - donati celigi, Institute of Turkish Standards, Ankara, Turkey.
  48. TS-EN 12390-8 (2002), Testing Hardened Concrete-Part 8: Depth of Penetration of Water under Pressure. Institute of Turkish Standards, Ankara, Turkey.
  49. Wang, C., Zhang, Y. and Zhao Z. (2012), "Fracture process of rubberized concrete by fictitious crack model and AE monitoring", Comput. Concr., 9(1), 51-61. https://doi.org/10.12989/cac.2012.9.1.051
  50. Wang, Y., Zureick, A.H. and Cho, B.S. (1994), "Properties of fibre reinforced concrete using recycled fibres from carpet industrial waste", J. Mater. Sci., 29(16), 4191-4199. https://doi.org/10.1007/BF00414198
  51. Wu, H.C., Lim, Y.M. and Li, V.C. (1996), "Application of recycled tyre cord in concrete for shrinkage crack control", J. Mater. Sci. Lett., 15, 1828-1831. https://doi.org/10.1007/BF00275355
  52. Yung, W.H., Yung, L.C. and Hua, L.H. (2013), "A study of the durability properties of waste tire rubber applied to self-compacting concrete", Construct. Build. Mater., 41,665-672. https://doi.org/10.1016/j.conbuildmat.2012.11.019

피인용 문헌

  1. Fresh and hardened properties of rubberized concrete using fine rubber and silpozz vol.4, pp.1, 2016, https://doi.org/10.12989/acc.2016.4.1.049
  2. Evaluation of the rheological behavior of fresh self-compacting rubberized concrete by using the Herschel–Bulkley and modified Bingham models vol.16, pp.1, 2016, https://doi.org/10.1016/j.acme.2015.09.003
  3. Performance of bricks and brick masonry prism made using coal fly ash and coal bottom ash vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.231
  4. Characterization of rubberized cement bound aggregate mixtures using indirect tensile testing and fractal analysis vol.105, pp.None, 2014, https://doi.org/10.1016/j.conbuildmat.2015.12.018
  5. Properties of concrete incorporating sand and cement with waste marble powder vol.4, pp.2, 2014, https://doi.org/10.12989/acc.2016.4.2.145
  6. Temperature and humidity effects on behavior of grouts vol.5, pp.6, 2014, https://doi.org/10.12989/acc.2017.5.6.659
  7. Experimental Study on Performance of Hardened Concrete Using Nano Materials vol.24, pp.2, 2014, https://doi.org/10.1007/s12205-020-0871-y
  8. Experimental Evaluation of Untreated and Pretreated Crumb Rubber Used in Concrete vol.11, pp.5, 2021, https://doi.org/10.3390/cryst11050558
  9. Lateral Infiltration Capacity of Pervious Concrete and Its Performance as Pavement Curb vol.34, pp.3, 2022, https://doi.org/10.1061/(asce)mt.1943-5533.0004101