Acknowledgement
Supported by : 보건복지부
References
- M. Lee, J. H. Kim, S. R. Park, and M.-Y. Lyu, Elast. Compos., 44, 373 (2009).
- M.-Y. Lyu and H. Y. Kim, Polymer Science and Technology, 20, 157 (2009).
- M. Lee and M.-Y. Lyu, Elast. Compos., 48, 300 (2013). https://doi.org/10.7473/EC.2013.48.4.300
- S. T. Won, T. B. Kim, S. Lee, J. M. Won, K. H. Cha, and M.-Y. Lyu, Elast. Compos., 47, 336 (2012). https://doi.org/10.7473/EC.2012.47.4.336
- M.-Y. Lyu, J.-H. Mo, and W.-J. Chung, Elast. Compos., 38, 295 (2003).
- M.-Y. Lyu and J.-H. Mo, Trans. Mater. Process, 13, 515 (2004). https://doi.org/10.5228/KSPP.2004.13.6.515
- H. Y. Na, B. C. Yoon, S. H. Kim, and S. J. Lee, Elast. Compos., 48, 133 (2013). https://doi.org/10.7473/EC.2013.48.2.133
- M. Lee, H. Kim, and M.-Y. Lyu, Polymer(Korea), 36, 555 (2012).
- M. Lee, H. Kim, and M.-Y. Lyu, Polymer(Korea), 36, 677 (2012).
- F. Liu, H. Zhou, and D. Q. Li, J. Reinf. Plast. Compos., 28, 571 (2009).
- X. Chen, Y. C. Lam, and D. Q. Li, J. Mater. Process. Technol., 101, 275 (2000). https://doi.org/10.1016/S0924-0136(00)00472-6
- D.-S. Choi and Y.-T. Im, Compos. Struct., 47, 655 (1999). https://doi.org/10.1016/S0263-8223(00)00045-3
- A. D. Drozdov, A. Al-Mulla, and R. K. Gupta, Comput. Mater. Sci., 28, 16 (2003). https://doi.org/10.1016/S0927-0256(03)00058-2
- K.-C. Ha, J.-R. Hwang, and J.-L. Doong, Polym. Polym. Compos., 4, 563 (1996).
- Digimat 4.3.1 Manual, e-Xstream Engineering, 2012.
- O. Pierard and I. Doghri, Int. J. Mult. Comp. Eng., 4, 521 (2006). https://doi.org/10.1615/IntJMultCompEng.v4.i4.80
- O. Pierard, C. Gonzalez, J. Segurado, J. LLorca, and I. Doghri, Int. J. Solids Struct., 42, 6945 (2007).
- I. Doghri and L. Tinel, Int. J. Plasticity, 21, 1919 (2005). https://doi.org/10.1016/j.ijplas.2004.09.003
- J. W. Park, J. H. Ahn, Y. M. Park, and M.-Y. Lyu, Elast. Compos., 47, 347 (2012). https://doi.org/10.7473/EC.2012.47.4.347
Cited by
- Observation of Two-Dimensional Shaped Aluminum Flake Orientation During Injection Molding and Its Orientation Mechanism pp.2092-7673, 2019, https://doi.org/10.1007/s13233-019-7097-1
- 급속냉각·가열장치에 따른 사출성형품의 휨에 관한 연구 vol.16, pp.8, 2014, https://doi.org/10.5762/kais.2015.16.8.5074
- Effect of warpage on the operation of a rapid cooling and heating device vol.41, pp.8, 2014, https://doi.org/10.1007/s40430-019-1806-8