DOI QR코드

DOI QR Code

Investigation on nanoadhesive bonding of plasma modified titanium for aerospace application

  • Ahmed, Sabbir (Department of Polymer Science and Technology, University of Calcutta) ;
  • Chakrabarty, Debabrata (Department of Polymer Science and Technology, University of Calcutta) ;
  • Mukherjee, Subroto (Facilitation Centre for Industrial Plasma Technologies, IPR) ;
  • Joseph, Alphonsa (Facilitation Centre for Industrial Plasma Technologies, IPR) ;
  • Jhala, Ghanshyam (Facilitation Centre for Industrial Plasma Technologies, IPR) ;
  • Bhowmik, Shantanu (Department of Aerospace Engineering, Amrita University, Faculty of Aerospace Engineering, Delft University of Technology)
  • 투고 : 2013.07.15
  • 심사 : 2013.09.20
  • 발행 : 2014.01.31

초록

Physico-chemical changes of the plasma modified titanium alloy [Ti-6Al-4V] surface were studied with respect to their crystallographic changes by X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM).The plasma-treatment of surface was carried out to enhance adhesion of high performance nano reinforced epoxy adhesive, a phenomenon that was manifested in subsequent experimental results. The enhancement of adhesion as a consequence of improved spreading and wetting on metal surface was studied by contact angle (sessile drop method) and surface energy determination, which shows a distinct increase in polar component of surface energy. The synergism in bond strength was established by analyzing the lap-shear strength of titanium laminate. The extent of enhancement in thermal stability of the dispersed nanosilica particles reinforced epoxy adhesive was studied by Thermo Gravimetric Analysis (TGA), which shows an increase in onset of degradation and high amount of residuals at the high temperature range under study. The fractured surfaces of the joint were examined by Scanning electron microscope (SEM).

키워드

참고문헌

  1. Ahmed, S., Dey, A., Joseph, A., Jhala, G., Mukherjee, S., Chakraborty, D. and Bhowmik, S. (2011), "A novel approach for the fabrication of high performance titanium laminate for aerospace application", Proceedings of the 12th World Conference of Titanium, Beijing, China, June.
  2. Avelar-Batista, J.C., Spain, E., Housden, J., Matthews, A. and Fuentes, G.G. (2005), "Plasma nitriding of Ti6Al4V alloy and AISI M2 steel substrates using D.C. glow discharges under a triode configuration", Surface & Coating Technology, 200, 1954-1961. https://doi.org/10.1016/j.surfcoat.2005.08.037
  3. Baker, T.N. (2010), Laser surface modification of Ti-alloy, Woodhead Publication, Cambridge, UK.
  4. Bhowmik, S., Benedictus, R., Poulis, J.A., Bonin, H.W. and Bui, V.T. (2008), "High performance nano adhesive bonding of space durable polymer and its performance under space environments", J. Polym. Eng., 28 (4), 225-242.
  5. Bhowmik, S., Benedictus, R., Poulis, J.A., Bonin, H.W. and Bui, V.T. (2009), "High performance nano adhesive bonding of titanium for aerospace and space application", Int. J. Adhes. Adhes., 29, 259-267. https://doi.org/10.1016/j.ijadhadh.2008.07.002
  6. Bhowmik, S., Bonin, H.W., Bui, V.T. and Weir, R.D. (2006a), "Durability of adhesive bonding of titanium in radiation and aerospace environment", Int. J. Adhes. Adhes., 26, 400-405. https://doi.org/10.1016/j.ijadhadh.2005.05.004
  7. Bhowmik, S., Bonin, H.W., Bui, V.T. and Weir, R.D. (2006b), "Modification of high-performance polymer composite through high energy radiation and low-pressure plasma for aerospace and space application", J. Appl. Polym. Sci., 102, 1959-1967. https://doi.org/10.1002/app.24230
  8. Bhowmik, S. and Chaki, T.K. (2003), "Failure analysis of adhesive joint of DC glow discharge exposed PP to steel", Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion, Novotel, Toronto, Canada, June.
  9. Bhowmik, S., Chaki, T.K. and Ray, S. (2004), "Surface modification of PP under different electrodes of DC glow discharge and its physicochemical characterization", Surf. Coat. Tech., 185, 81-91. https://doi.org/10.1016/j.surfcoat.2003.12.013
  10. Bhowmik, S., Ghosh, P.K. and Ray, S. (2001), "Surface modification of HDPE and PP by mechanical polishing and Dc glow discharge and their adhesive joining to steel", J. Appl. Polym. Sci., 80, 461-470.
  11. Custodio, J., Broughton, J. and Cruz, H. (2009), "A review of factors influencing the durability of structural bonded timber joints", Int. J. Adhes. Adhes., 29, 173-185. https://doi.org/10.1016/j.ijadhadh.2008.03.002
  12. Dean, D. and Obore, A.M. (2006), "Sylvester richmond and elijahnyairo, multiscale fiber-reinforced nanocomposite: synthesis, processing and properties", Compos. Sci. Technol., 66, 2135-2142. https://doi.org/10.1016/j.compscitech.2005.12.015
  13. Frauehiger, V.M., Schlottig, F., Gasser, B. and Textor, M. (2004), "Anodic plasma-chemical treatment of CP titanium surfaces for biomedical applications", Biomaterials, 25, 593. https://doi.org/10.1016/S0142-9612(03)00560-X
  14. Hanawa, T., Hiromoto, S., Yamamoto, A., Kuroda, D. and Asami, K. (2002), "XPS characterization of the surface oxide film of 316L stainless steel samples that were located in quasi-biological environments", Mater. Trans., 43 (12), 3088-3092. https://doi.org/10.2320/matertrans.43.3088
  15. Iqbal, H.M.S., Bhowmik, S. and Benedictus, R. (2010), "Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints", Int. J. Adhes. Adhes., 30, 418-424. https://doi.org/10.1016/j.ijadhadh.2010.02.007
  16. Iqbal, H.M.S., Bhowmik, S., Bhatnagar, N., Mondal, S. and Ahmed, S. (2011), "High performance adhesive bonding of high temperature resistant polymer", J. Adhes. Sci. Technol., 1-13. (in press)
  17. Jha, S., Bhowmik, S., Bhatnagar, N., Bhattacharya, N.K., Deka, U., Iqbal, H.M.S. and Benedictus, R. (2010), "Experimental investigation into the effect of adhesion properties of PEEK modified by atmospheric pressure plasma and low pressure plasma", J. Appl. Polym. Sci., 118, 173-179. https://doi.org/10.1002/app.31880
  18. LeClair, P.R. (1998), "Titanium nitride thin films by the electron shower", Ph.D. Dissertation, Massachusetts Institute of Technology, Cambridge.
  19. Ramani, K., Weidner, W.J. and Kumar, G. (1998), "The evolution of residual stresses in thermoplastic bonding to metals", Int. J. Adhes. Adhes., 18, 401. https://doi.org/10.1016/S0143-7496(98)00042-6
  20. Sautrot, M., Albel, M.L., Watts, J.F. and Powell, J. (2005), "Incorporation of an adhesion promoter in a structural adhesive: aspects of durability and interface chemistry", Surf. Interface Anal., 81, 163-187.
  21. Shenton, M.J., Lovell-Hoare, M.C. and Stevens, G.C. (2001), "Adhesion enhancement of polymer surfaces by atmospheric plasma treatment", J. Phys. D. Appl. Phys., 34, 2754-2760. https://doi.org/10.1088/0022-3727/34/18/307
  22. Singh, G.P., Alphonsa, J., Barhai, P.K., Rayjada, P.A., Raole, P.M. and Mukherjee, S. (2006), "Effect of surface roughness on the properties of the layer formed on AISI 304 stainless steel after plasma nitriding", Surf. Coat. Tech., 200, 5807-5811. https://doi.org/10.1016/j.surfcoat.2005.08.149
  23. Yilbas, B.S., Sahin, A.Z., Al-garni, A.Z., Said, S.A.M., Ahmed, Z., Abdulaleem, B.J. and Sami, M. (1996), "Plasma nitriding of Ti6Al4V alloy to improve some tribological properties", Surf. Coat. Tech., 80, 287-292. https://doi.org/10.1016/0257-8972(95)02472-7
  24. Zinger, O., Chauvy, P.F. and Landolt, D. (2003), "Scale-resolved electrochemical surface structuring of titanium for biological applications", J. Electrochem. Soc., 150, B495-B503. https://doi.org/10.1149/1.1613292

피인용 문헌

  1. Epoxy–novolac interpenetrating network adhesive for bonding of plasma-nitrided titanium vol.29, pp.14, 2015, https://doi.org/10.1080/01694243.2015.1027475
  2. Characteristics of IPN Adhesive Bonding of Polyether Imide to Titanium for Aerospace Application vol.30, pp.4, 2017, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000725
  3. Plasma nitriding on titanium surface for adhesion promotion vol.31, pp.8, 2015, https://doi.org/10.1179/1743294415Y.0000000017
  4. ADHESION CHARACTERISTICS ON ANODIZED TITANIUM AND ITS DURABILITY UNDER AGGRESSIVE ENVIRONMENTS vol.23, pp.05, 2016, https://doi.org/10.1142/S0218625X16500335
  5. Interpenetrating polymer network adhesive bonding of PEEK to titanium for aerospace application vol.0, pp.0, 2018, https://doi.org/10.1515/polyeng-2018-0148
  6. Durability of nano-reinforced polyimide adhesive bonding of titanium nitride deposited aluminium for aerospace applications vol.6, pp.9, 2014, https://doi.org/10.1088/2053-1591/ab192f