DOI QR코드

DOI QR Code

Very long life fatigue behaviors of 16Mn steel and welded joint

  • Liu, Yongjie (Key Laboratory of Energy Engineering Safety and Disaster Mechanics, Ministry of Education, College of Architecture & Environment, Sichuan University) ;
  • He, Chao (Key Laboratory of Energy Engineering Safety and Disaster Mechanics, Ministry of Education, College of Architecture & Environment, Sichuan University) ;
  • Huang, Chongxiang (Key Laboratory of Energy Engineering Safety and Disaster Mechanics, Ministry of Education, College of Architecture & Environment, Sichuan University) ;
  • Khan, Muhammad K. (Key Laboratory of Energy Engineering Safety and Disaster Mechanics, Ministry of Education, College of Architecture & Environment, Sichuan University) ;
  • Wang, Qingyuan (Key Laboratory of Energy Engineering Safety and Disaster Mechanics, Ministry of Education, College of Architecture & Environment, Sichuan University)
  • 투고 : 2013.07.12
  • 심사 : 2014.05.18
  • 발행 : 2014.12.10

초록

Very long life fatigue tests were carried out on 16Mn steel base metal and its welded joint by using the ultrasonic fatigue testing technique. Specimen shapes (round and plate) were considered for both the base metal and welded joint. The results show that the specimens present different S-N curve characteristics in the region of $10^5-10^9$ cycles. The round specimens showed continuously decreasing tendency while plate specimens showed a steep decreasing step and an asymptotic horizontal one. The fatigue strength of round specimen was found higher than plate specimen. The fatigue strength of as-welded joint was 45.0% of the base material for butt joint and 40% for cruciform as-welded joint. It was found that fracture can still occur in butt joint beyond $5{\times}10^6$ cycles. The cruciform joint has a fatigue limit in the very long life fatigue regime ($10^7-10^9$ cycles). Fatigue strength of butt as-welded joint was much higher as compared to cruciform as-welded joint. Improvement in fatigue strength of welded joint was found due to UPT. The observation of fracture surface showed crack mainly initiated from welded toe at fusion areas or geometric discontinuity sites at the surface in butt joint and from welded toe in cruciform joint.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation of China

참고문헌

  1. BS7608 (1993), Code of practice for fatigue design and assessment of steel structures, British Standards Institution, London.
  2. Bathias, C. (2006), "Piezoelectric fatigue testing machines and devices", Int. J. Fatigue, 28, 1438-1445. https://doi.org/10.1016/j.ijfatigue.2005.09.020
  3. Dong, P. (2001), "A structural stress definition and numerical implementation for fatigue analysis of welded joints", Int. J. Fatigue, 23, 865-876. https://doi.org/10.1016/S0142-1123(01)00055-X
  4. ENV 1993-1-1: Eurcode 3 (1992), Design of steel structures-Part 1-1, European Committee for Standardization, Brussels.
  5. Fan, J.L., Guo, X.L., Wu, C.W. (2012), "Fatigue performance assessment of welded joints using the infrared thermography", Struct. Eng. Mech., 44, 417-429. https://doi.org/10.12989/sem.2012.44.4.417
  6. Fricke, W. (2003). "Fatigue analysis of welded joints:state of development", Mar. Struct., 16, 185-200. https://doi.org/10.1016/S0951-8339(02)00075-8
  7. Hobbacher, A. (1996), Fatigue design of welded joints and components:Recommendations of IIW Joint Working Group XIII-XV, Abington Publishing, Abington, Cambridge, UK.
  8. Hobbacher, A. (1997), "Basic philosophy of the new IIW recommendations on fatigue design of welded joints and components", Weld World, 39, 272-278.
  9. Marines, I. and Bathias, X. (2003), "An understanding of very high cycle fatigue of matals," Int. J. Fatigue, 25, 1101-1107. https://doi.org/10.1016/S0142-1123(03)00147-6
  10. Puchi-Cabrera, E.S., Saya-Gamboa, R.A., La Barbera-Sosa, J.G. et al. (2009), "Fatigue Llife of AISI 316L Stainless Steel Welded Joints, Obtained by GMAW", Weld. Int., 23, 778-788. https://doi.org/10.1080/09507110902843347
  11. Radaj, D., Sonsino, C.M. and Flade, D. (1998), "Prediction of service fatigue strength of a welded tubular joint on the basis of the notch strain approach", Int. J. Fatigue, 20, 471-480. https://doi.org/10.1016/S0142-1123(98)00012-7
  12. Rudolph, J. and Weiss, E. (2002), "Concept-conforming modeling and analysis of welded pressure vessel components in the context of structural, notch stress and local strain approaches to design against fatigue", CHEM-ING-TECH, 74, 33-40. https://doi.org/10.1002/1522-2640(200202)74:1/2<33::AID-CITE33>3.0.CO;2-1
  13. Sonsino, C.M. (2007), "Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety", Int. J. Fatigue, 29, 2246-2258. https://doi.org/10.1016/j.ijfatigue.2006.11.015
  14. Teng, T.L., Fung, C.P. and Chang, P.H. (2003), "Effect of Residual Stresses on the Fatigue of Butt Joints Using Thermal Elasto-plastic and Multiaxial Fatigue Theory", Eng. Fail. Anal., 10, 131-151. https://doi.org/10.1016/S1350-6307(02)00068-7
  15. Teng, T.L. and Chang, P.H. (2004), "Effect of residual stresses on fatigue crack initiation life for butt-welded joints", J. Mater. Proc. Tech., 145, 325-335. https://doi.org/10.1016/j.jmatprotec.2003.07.012
  16. Wang, Q.Y., Bathias, C., Kawagoishi, N. and Chen, Q. (2002), "Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength", Int. J. Fatigue, 24, 1269-1274. https://doi.org/10.1016/S0142-1123(02)00037-3
  17. Wang, Q.Y. and Bathias, C. (2004), "Fatigue characterization of a spheroidal graphite cast iron under ultrasonic loading", J. Mater. Sci.,39, 687-689. https://doi.org/10.1023/B:JMSC.0000011532.41231.c8
  18. Wang, T., Wang, D., Huo, L. and Zhang, Y. (2009), "Discussion on fatigue design of welded joints enhanced by ultrasonic peening treatment (UPT)", Int. J. Fatigue, 31, 644-650. https://doi.org/10.1016/j.ijfatigue.2008.03.030
  19. XIII-1539-96/XV-845-96 (2002), Recommendations for fatigue design of welded joints and components, International Institute of Welding, Paris.
  20. Zhao, X., Wang, D., Deng, C. Liu, Y. and Song, Z. (2012), "The fatigue behaviors of butt welds ground flush in the super-long life regime", Int. J. Fatigue, 36, 1-8. https://doi.org/10.1016/j.ijfatigue.2011.09.009

피인용 문헌

  1. Ductile cracking simulation procedure for welded joints under monotonic tension vol.60, pp.1, 2016, https://doi.org/10.12989/sem.2016.60.1.051
  2. Gigacycle Fatigue Fracture of Low Strength Carbon Steel, Tested using a Simulated Heat Affected Zone Microstructure vol.59, pp.10, 2014, https://doi.org/10.2355/isijinternational.isijint-2019-086